Hi Matt that’s really nice flying mate. T28 is my favourite next is the Mustang P51 I’m using a radiomaster ZORRO with the nicer gimbals I’m not quite as confident as you in manual mode so tend to fly in horizontal mode then briefly go to manual mode until I chicken out and flick the safe mode switch but im getting there practice makes perfect as they say.and thanks really appreciate the help with your settings,kind regards johnw fromAUST
Yes check the servos with a servo checker, and zero out the servo, then put the arm back on it, just don't forget to reset the trim's on the transmitter for that T-28, kewl Beans Bro.....😁😀 P.S. you can also adjust the linkages with that little U shape wire linkage.......
Just had to put my f22 in the closet today, same issue one motor gets no power. I think I'm going to get the su35 to scratch my mini jet itch. However next plane I'm getting will be the 900mm sbach it's only 110 and is a 3d trainer which I've come to realize I love 3d flying it's just very costly to get anything in that category
@MatthewDoesStuffRC yea i know. I want to stay sub250..just stress free for me.. 3d is cool i like it a lot! My next is going to be DeeRc F35. Thanks for sharing Mat!
So for better seeing the transmitter, you should have a desk, with an overhead cam showing down on your desk!!! Then people can see your transmitter inputs better!?? IMHO....
@@davidlewis620 the expo helps a ton!! I took the wing apart from my t28 and maxed out all control surfaces on it so I can get it to tumble and it sure was flying great but the day ended. Hope to upload more of the t28 soon it flies incredibly stable at low speeds
Good stuff Matt....I did the same thing with the 500mm Sport S2 and my Radiomaster TX16s and it made the plane fly so much better. I put a slightly bigger prop with more thrust on it, that made a big difference. I also put some small LED nav. lights on it for low light visibility and that will get you a couple more flights in as it starts to get dark. I'm going to get a couple of these warbirds and give those a try. If you want or need a little more authority on control surfaces you can add some clear packing tape to the outer edges by 2-3mm and that really wakes it up and the tape is clear so it doesn't look that bad, but these warbirds may not need that. As you probably already know - don't put tape on any painted surface unless you plan on leaving the tape in place or don't mind the paint coming off when you remove the tape.
Amazing I actually have clear packing tape being delivered today as well! I was thinking about this but had trouble finding support on it I definitely do plan to add some tape to my t28 I see huge potential for it but it's very nose heavy. I would love to do things like maybe flaps one day or extended wings flat like flaps to see if I can get it to harrier or something
Hey Matt, is it possible to make a similar video but with the camera set up and zoomed in to purposefully film the tx screen? It would be nice to see the settings as you’re talking about them. Your flight skill is excellent and people want to imitate your settings perfectly. Thanks for making these vids.
@@trendkill555 I don't think I can make a good video on tx settings but I could help walk you through them, what did you have questions with? I plan on making another on smooth flying my t28 but this weather has been crazy the t28 with a tiny amount of nose weight has been really impressing me
I originally bought fpv for this months ago and Amazon messed up that order out of all my orders so i decided to not play with fpv till a further time. The little tiny cameras are around 5-8 grams but I would highly recommend it on the t28 as it is 9 grams lighter than the f4u stock
That is excellent information to know! I am a low experience RC pilot (total noob at this point) looking to get back into fixed wing and rotary wing. Spent most of my time driving.
So if I may ask!???, where are you at bro, I'm here in San Antonio,tx....So I am guessing, because of the mountains in the background, maybe salt lake city.Utah or there about's >???? I was there back in the 90's, spent two and a half years there.. I loved going into the foothills, and exploring, the uenta mountain"s,and the Wasatch mountains I worked up there at parkcity, building houses there.., also worked in Salt lake, West valley, and West Jordan as well as Sandy and draper; that view you have reminds me of there!??...
Try the Zero new version, I'm interested in upgrading TX. Stock ones squeaky gimbals of plastic. IMHO these are more advanced beginner or some experience is best,!
Good video there Matt. I'm rapidly building a collection of these and enjoy flying them as much as my bigger stuff. I was interested in what you said about the F22. I have a similar F35 which I can't seem to find a protocol to bind it to on my TX16s with the latest 4 in 1 module firmware. What protocol did you use on your F22? My F35 flies ok on the stock transmitter but it would be nice to have more controls like expo etc on the Radiomaster.
Thank you, I updated my jumper to 1.3.4.11 and the sgf22 protocol was the correct protocol for my plane. I really like f22s with props but I don't like anything on the market currently so I ordered a flight test f22 I'm going to be assembling soon
@@MatthewDoesStuffRC Thanks for that. I went through all the protocols but maybe missed that one. I'll give it go. Thanks, or as we say in the UK, Cheers mate!!
Buen video, tengo un nuevo Messermich y he observado que en modo intermedio la profundidad es como si tuviese un retardo ,tiras de profundidad y parece que no sucede nada,,, y de pronto hace el movimiento de forma brusca( esto no pasa en modo beginer, donde el movimiento del timon va segun le ordenes)El caso es que es un poco impredecible y nada comodo , uso el transmisor de eachine, ¿Sabes que puedo hacer para coreirlo ? Gracias.
The intermediate or middle gyro setting the elevator moves like a switch only 100% up or down or nothing. This is to help it do the loops I assume but there is nothing to change it for that gyro setting. The other modes do not have that issue
And you must remember that these planes are to scale so they are subject to stalling just like the real one's just keep the throttle at a 1/4 to 1/3, to keep from stalling!???/..... especially when Landing them!??...... I do like the extra long battery hatch on the f4u corsair, as opposed to the p-51d's,/........
I got about 12 of these birds fly them on a radiomaster 5 of them are set up that i don't need the gyro absolutely brilliant for the price
Hi Matt that’s really nice flying mate. T28 is my favourite next is the Mustang P51 I’m using a radiomaster ZORRO with the nicer gimbals I’m not quite as confident as you in manual mode so tend to fly in horizontal mode then briefly go to manual mode until I chicken out and flick the safe mode switch but im getting there practice makes perfect as they say.and thanks really appreciate the help with your settings,kind regards johnw fromAUST
Yes check the servos with a servo checker, and zero out the servo, then put the arm back on it, just don't forget to reset the trim's on the transmitter for that T-28, kewl Beans Bro.....😁😀
P.S. you can also adjust the linkages with that little U shape wire linkage.......
Yup , that f4-u corsair, fly's damn good with that trans, and receiver,with expo and all!!......
Lots of good info
Very good talk thru😊... thank you😊 i have not had an issue with my BM22 at all. Man.. all these lil planes are soooo fun to fly!
Just had to put my f22 in the closet today, same issue one motor gets no power. I think I'm going to get the su35 to scratch my mini jet itch. However next plane I'm getting will be the 900mm sbach it's only 110 and is a 3d trainer which I've come to realize I love 3d flying it's just very costly to get anything in that category
@MatthewDoesStuffRC yea i know. I want to stay sub250..just stress free for me.. 3d is cool i like it a lot! My next is going to be DeeRc F35. Thanks for sharing Mat!
So for better seeing the transmitter, you should have a desk, with an overhead cam showing down on your desk!!! Then people can see your transmitter inputs better!?? IMHO....
Hey, that thing is flying like a larger more expensive model ! That's great, good job dude !!
@@davidlewis620 the expo helps a ton!! I took the wing apart from my t28 and maxed out all control surfaces on it so I can get it to tumble and it sure was flying great but the day ended. Hope to upload more of the t28 soon it flies incredibly stable at low speeds
Good stuff Matt....I did the same thing with the 500mm Sport S2 and my Radiomaster TX16s and it made the plane fly so much better. I put a slightly bigger prop with more thrust on it, that made a big difference. I also put some small LED nav. lights on it for low light visibility and that will get you a couple more flights in as it starts to get dark. I'm going to get a couple of these warbirds and give those a try. If you want or need a little more authority on control surfaces you can add some clear packing tape to the outer edges by 2-3mm and that really wakes it up and the tape is clear so it doesn't look that bad, but these warbirds may not need that. As you probably already know - don't put tape on any painted surface unless you plan on leaving the tape in place or don't mind the paint coming off when you remove the tape.
Amazing I actually have clear packing tape being delivered today as well! I was thinking about this but had trouble finding support on it I definitely do plan to add some tape to my t28 I see huge potential for it but it's very nose heavy. I would love to do things like maybe flaps one day or extended wings flat like flaps to see if I can get it to harrier or something
Great job Matthew!
BTW, I like your vids, lots of useful info!!
I'm with ya on them, love rc planes, glass cub ultra slow bush plane rules!
@@judechopper getting a mini 500cub from volantex on the way now! Can't wait to show my new mods I've learned for roll rate
Hey Matt, is it possible to make a similar video but with the camera set up and zoomed in to purposefully film the tx screen? It would be nice to see the settings as you’re talking about them.
Your flight skill is excellent and people want to imitate your settings perfectly. Thanks for making these vids.
@@trendkill555 I don't think I can make a good video on tx settings but I could help walk you through them, what did you have questions with? I plan on making another on smooth flying my t28 but this weather has been crazy the t28 with a tiny amount of nose weight has been really impressing me
That little f4u would be really fun with head tracking fpv. Maybe another 5 years or so and they will be small enough to do that with!
I originally bought fpv for this months ago and Amazon messed up that order out of all my orders so i decided to not play with fpv till a further time. The little tiny cameras are around 5-8 grams but I would highly recommend it on the t28 as it is 9 grams lighter than the f4u stock
That is excellent information to know! I am a low experience RC pilot (total noob at this point) looking to get back into fixed wing and rotary wing. Spent most of my time driving.
th-cam.com/video/1fJdggY6_PY/w-d-xo.htmlsi=KtXNOQUKJUSYlrWp Simple head tracking on small 400mm rc plane Mustang p51D but after Brushless Conversion
@@Ambobeat got your page! Thank you!
So if I may ask!???, where are you at bro, I'm here in San Antonio,tx....So I am guessing, because of the mountains in the background, maybe salt lake city.Utah or there about's >????
I was there back in the 90's, spent two and a half years there.. I loved going into the foothills, and exploring, the uenta mountain"s,and the Wasatch mountains I worked up there at parkcity, building houses there.., also worked in Salt lake, West valley, and West Jordan as well as Sandy and draper; that view you have reminds me of there!??...
Try the Zero new version, I'm interested in upgrading TX. Stock ones squeaky gimbals of plastic. IMHO these are more advanced beginner or some experience is best,!
Wow
Good video there Matt. I'm rapidly building a collection of these and enjoy flying them as much as my bigger stuff. I was interested in what you said about the F22. I have a similar F35 which I can't seem to find a protocol to bind it to on my TX16s with the latest 4 in 1 module firmware. What protocol did you use on your F22? My F35 flies ok on the stock transmitter but it would be nice to have more controls like expo etc on the Radiomaster.
Thank you, I updated my jumper to 1.3.4.11 and the sgf22 protocol was the correct protocol for my plane. I really like f22s with props but I don't like anything on the market currently so I ordered a flight test f22 I'm going to be assembling soon
@@MatthewDoesStuffRC Thanks for that. I went through all the protocols but maybe missed that one. I'll give it go. Thanks, or as we say in the UK, Cheers mate!!
you can just carefully cut a hatch out, then when you are done just put thick clear tape on it???
Buen video, tengo un nuevo Messermich y he observado que en modo intermedio la profundidad es como si tuviese un retardo ,tiras de profundidad y parece que no sucede nada,,, y de pronto hace el movimiento de forma brusca( esto no pasa en modo beginer, donde el movimiento del timon va segun le ordenes)El caso es que es un poco impredecible y nada comodo , uso el transmisor de eachine, ¿Sabes que puedo hacer para coreirlo ? Gracias.
The intermediate or middle gyro setting the elevator moves like a switch only 100% up or down or nothing. This is to help it do the loops I assume but there is nothing to change it for that gyro setting. The other modes do not have that issue
Thanks
@@MatthewDoesStuffRC
And you must remember that these planes are to scale so they are subject to stalling just like the real one's just keep the throttle at a 1/4 to 1/3, to keep from stalling!???/..... especially when Landing them!??...... I do like the extra long battery hatch on the f4u corsair, as opposed to the p-51d's,/........
Sorry for text bombing your vid , bro..😁
Pls send meone