ATV Universal Plow Assembly and install
ฝัง
- เผยแพร่เมื่อ 15 ม.ค. 2022
- I bought a universal plow kit from amazon for the amount of $349.00
I installed it to my 2019 Honda rancher 420 4x4
In this video I show how to assemble the plow kit and how to attach the mount to
the atv while retaining the original factory skid plate - แนวปฏิบัติและการใช้ชีวิต
Love the quality and speed of this vid. No wasted time and really shows install. Good job.
Thank you
Great video! My only variation was putting a pulley on the plow frame, running the winch cable through the pulley then hooked onto the top of the front bumper bars. Cuts the cable tension in half.
That's a great idea and I may just do that thank you
Thank you!! Great video and clear instructions. You should sell this to the guys who built the plow, their instructions suk.
Thank you and yes their Instructions were no help whatsoever
Don't miss the part where he puts a note that there are instructions, BUT THAT THEY AREN'T FOR THIS PLOW! I had to go back through to notice that. That means that Jamie has provided the only instructions for this particular plow. GREAT JOB JAMIE LIST!!
Thank you
The instructions I got was for this plow but they really suck though.
Getting mine tomorrow, looks pretty easy after watching this, thanks! I have an aluminum skid plate so I may just take it off.. just a yard machine and not a rock crawler so I’m not too concerned about it! Thanks again!
Awsome, good luck with the install
I just got this same plow. I haven't gotten around to installing it yet im still working on installing my winch. Im making my mounting plate so i dont have to buy one. Im almost got it done but between weather and working long hours its taking me a little longer than i meant for it to. It looks like the plow is going to be a lot easier the the winch. Thanks for the video i believe it will make installing this a lot easier.
I finally got mine on today and your video helped a lot. The only thing I saw where you messed up was the eye bolts don't go on the blade they go on the pivot and the springs go on the blade. Now with that being said it should work both ways but I looked at the directions because of how big them holes are and it didn't seem right. I'm surprised at how sturdy it seems to be for the cost. Anyway thanks again for the video it helps because the instructions kinda suck.
Nice video and helpful and fast. Other guys have had to trim some mount off to clear their tires too. You could always check out rear tire chains too, for better traction. Kimpex or Kolpin. Thanks for posting!
Thank you and your welcome
Thank you for this video!!! You did an awesome job of showing everything and not wasting time.
I just ordered this plow Sunday at $296!!!
Your welcome and enjoy your new plow
Agree! Amazing video! Could either of you share the link to this product from Amazon?
@@bradstuart9840 a.co/d/auqEY6O
@@jlistdiy thanks so much! Appreciate it!!
@@bradstuart9840 your welcome
Thanks for making this, helped me out big time!
Your welcome
Great video ,,THANKS,,
Thank you Your welcome
Thanks you
Your welcome
Thank you for the video I just did mine based on your instructions 👍🏼👍🏼👍🏼🤟🏼
Awsome I'm glad it helped
Hey brother I hope you can help me here one of my workers loss one of the spring did you know some where or who can sell this kind of springs
@@juanjosejaimesmalpica404 here's a link to Amazon a.co/d/6q8WyXx
Thanks you brother !!
@@juanjosejaimesmalpica404 your welcome
Jamie,
Great Video !
Bought snow plow after watching your video of how Easy it is to assemble and install the snow plow on ATV !
Great Snow Plow !
I did a Internet search for a wear bar for plow and can't find any 48" wear bars that fit this plow .
Do you have any info on where to get wear bar ?
Thanks !
Stay Safe & Healthy !
God Bless !
Wade E. Booher
It was pretty easy to assemble and I haven't looked for a wear bar yet since mine has been holding up rather well
@@jlistdiy
Thanks for the message !
I just like to have a spare.
I owned a Cycle Country for 29 yrs . and went through quit a few wear bars in that time .
I watched your video and ordered one and got it in 2 days .
The mounts for the Cycle Country were the same spacing and didn't have to put KUAFA mounts on !
The wear bar hole spacing is totally different !
Keep the Great Video's Coming !
Stay Safe & Healthy !
God Bless !
This is gangster man
Makes the job easier for sure
Made it look easier than it is lol
👍
Why do I have some hardware left over? I also noticed you didn’t use either. I’m referring to the pieces shown on table at 1:04 in the video. The 4 black plates and the spacers to the left of them. Thanks
it is a universal plow so their is extra hardware for different quads
Awesome video! Was just looking at this plow on Amazon lastnight,
How has it been holding up? Any weak points or cutting edge wearing rather fast?
It's been holding up fantastic I have not had any issues with it wearing at all and it's built extremely well
@jlistdiy just ordered one, your video here is going to make the install a breeze, thanks!
Are you still happy with this plow? Do you feel like it is heavy enough to plow through heavy snow or ice? Any concerns that it will bend or break?
I'm still very happy with it and did a fantastic job on the wet heavy snow we had the other day and I don't think it would ever bend or break it is all around a very solid built plow.
question. I think there is a mount already installed underneath my quad. approximately what is the measurement of the space between the ears that hold the A frame connected by the bolt and cotter pin?
Sorry for the late response, it measures 15 inches
Was there some type of suggestion measurement in the instructions of how far forward the plow should set in front of your bumper? I understand that there needs to be sufficient room to tilt the blade full left or full right without it hitting your tires. But it looks to me your plow is maybe 3" farther forward than it needs to be, would you agree? The winch instead of pulling it straight up is pulling it backwards a little bit. My concern is that may cause extra stress on the plow framework. Maybe this is a non-issue and I'm overthinking it??? Just looking for your opinion before I mount mine up. Mine came with no instructions whatsoever.
You are correct I have moved it back a few inches since I made this video and works better
@@jlistdiy thank you for replying! I'm hoping to start and finish mine tomorrow. 🤞
Do you think I should position the plow where the winchline will hang almost strait down and then match & mount the mounting plates accordingly ?
@@bhoss7133 no problem and that would be the best way to mount it 👌
@@jlistdiy thank you sir!
@@bhoss7133 your welcome
Do u have a link to purchase this plow
I can't seem to find a link to share but if yougo to Amazon.com and type kuafu snow plow , it will come up
You think a honda 250 can handle it my friend?
Yes absolutely I use to plow with a 1998 arctic cat 250 2 wheel drive quad with no issues