BMW X5 Fixing Front Driveshaft Splines

แชร์
ฝัง
  • เผยแพร่เมื่อ 26 ธ.ค. 2023
  • How to Fix Front Drive Shaft Splines on BMW E53 X5 | DIY Repair Guide
    Description:
    🔧 In today's video, I'll be guiding you through the step-by-step process of repairing the front drive shaft splines on a BMW E53 X5. This comprehensive tutorial is perfect for DIY enthusiasts and BMW owners who want to learn more about their vehicle's maintenance.
    🚗 What You'll Learn:
    Understanding the Issue: An overview of common problems with the BMW E53 X5 front drive shaft splines.
    Tools You'll Need: A detailed list of all the tools and materials required for this repair.
    Step-by-Step Guide: Follow along as I dismantle, repair, and reassemble the front drive shaft splines.
    Tips and Tricks: Insider knowledge to make your repair smoother and more efficient.
    Safety Precautions: Ensuring a safe and successful repair process.
    👨‍🔧 Who This Video Is For:
    BMW E53 X5 owners
    Automotive DIY enthusiasts
    Beginners and experienced mechanics looking for detailed guidance
    💡 Did You Know? The BMW E53 X5 is known for its robustness but, like any vehicle, requires regular maintenance to keep it running smoothly. This repair is one of the key aspects of maintaining the longevity of your vehicle.
    👍 If you find this video helpful, please give it a thumbs up, subscribe for more BMW maintenance tutorials, and share it with other BMW enthusiasts!
    🔔 Stay Connected:
    Subscribe to our channel for more automotive repair guides
    #BMWE53X5Repair #DriveShaftRepair #DIYCarMaintenance #AutomotiveDIY #BMWMaintenance #CarRepairTutorial #E53X5Maintenance #VehicleMaintenance #AutoRepairGuide #BMWRepair
  • ยานยนต์และพาหนะ

ความคิดเห็น • 13

  • @peterruiter9875
    @peterruiter9875 2 หลายเดือนก่อน

    Thanks for you video. Very helpful.
    I just did mine without the spacer. Welded it on 81 cm and cut of about 1 cm from the gearboxtube. That was worn out anyway so now I,ve got the spines reaching all the way in. Works perfectly.

    • @BimmerFix
      @BimmerFix  2 หลายเดือนก่อน

      That's a great job! The spacer is very hard to find.

  • @crystalworks1
    @crystalworks1 7 หลายเดือนก่อน

    Very nice. Thank you for your contribution to helping owners keep these tanks on the road.

  • @thetoughcookie3665
    @thetoughcookie3665 7 หลายเดือนก่อน

    Nice instructions. Did this also couple of year ago, but without the spacer and welded at it's spot on full lenght.

  • @gaborlengyel1863
    @gaborlengyel1863 7 หลายเดือนก่อน

    super educational video,Thank You!

  • @denisovanhybrid9610
    @denisovanhybrid9610 7 หลายเดือนก่อน

    Fantastic ❤

  • @Dutch-vj2eg
    @Dutch-vj2eg 7 หลายเดือนก่อน +1

    I did this fix on my 4.4i and the bell housing on the 4.4i is different. This means that the hex bolt heads were coming too close to the bell housing with the spacer installed. Instead I used higher grade internal hex bolts.
    Also, on my 4.4i it would have been impossible to install the shaft if I had made it 30"long. I went for 29 13/16". 1/16" more might have worked but I did not want to risk having to disconnect the diff or the TC.
    For a few days I ran the car with only three spacers on the bolts as the Russian made spacer took a few days to arrive. I guess that source is no longer an option....

    • @BimmerFix
      @BimmerFix  7 หลายเดือนก่อน +2

      That's awesome, the good thing is you can find the perfect length and test it out before welding the spline tip on the driveshaft.
      As for the spacer, I ordered it from Urkaine, since it's no longer available from Russia.

  • @jdsilvaca
    @jdsilvaca 3 หลายเดือนก่อน

    Great video! What is the part number for that spacer, and the new rubber o-ring grommet?

    • @BimmerFix
      @BimmerFix  2 หลายเดือนก่อน

      The spacer is aftermarket, no part number, unfortunately. Check realoem.com for other parts, or let me know the time in the video you're looking at.

  • @EdRaket13
    @EdRaket13 7 หลายเดือนก่อน

    funny i have a 325ix from 1986 and a x5 from 2005 and the booth have the same wake axle

  • @Chiscassippi
    @Chiscassippi 7 หลายเดือนก่อน

    Should the splines have some sort of lubricant before fitting together?

    • @BimmerFix
      @BimmerFix  7 หลายเดือนก่อน

      You can put a bit of grease. A/C drains just above the splines. Some people move the drains slightly, some use grease on the splines. Personally, I didn't find the rust to be significant, rather just light surface rust. I just sprayed the splines with ospho (phosphoric acid). I'm not worried about much rust, especially how deep the splines go after this fix (almost 2 inches instead of 0.75).