Thanks for this vid, PJ, very helpful. Didn't work for me tho: My new radio gets hot and no sound. I read it gettin hot has to do with speaker wiring. My connector cable has an additional orange cable at the black speaker plug. Do I just cut it? Thanx!
My corsa 02 i just bought the radio cd player for the car was in safe mode. I had 2 metal keys for my old ford ka so i cut the keys in half and put them in the holes. And voila i managed to pull the radio out and thank god the code was written on the casing. Happy days got it working and happy with the factory cd radio. But good to know if you want a better system great video.
Hi! First off, thanks for the helpful vid! I have one problem though, my new radio doesnt turn on at all, the old one works perfectly fine, so im guessing it has something to do with the adapter, could you suggest something?
No power is caused by two possibilities. One is no good earth (black cable) the other is one of the two power cables are not getting 12volts, one is red the other is yellow. Check your car owners manual for radio fuse first.
Just build in a radio in my Corsa C just like you did in this video, and it works like a charm. Many thanks for uploading this video. Greetings from Holland. 😉
Grensgeval Ja dat mag zekers. Kijk hier maar eens; www.winparts.nl/interieur-bekleding/inbouwframes-radio/opel/corsa-c-f08-f68-bouwjaar-2000-09-2009-12/c1779-588-14693.html
have you got a video for the corsas with the newer wiring? i have a 2006 corsa and just can’t figure out how to get the power into the radio everything is wired correctly but i guess there is no ignition power from the red cable in the ISO harness
I know this is an old video, but thank you so much as this has helped me install a new radio, however could you explain how to swap the wires around so that the radio will store stations please? Thank you x
The cable that comes with the new radio has a yellow cable and a red cable, both these should have a joint in the middle that pulls apart. Pull apart both wires at the centre joint and swap them so that red joins yellow and yellow joins red.
Hello, i'm curious if it shows "SAFE MODE" after the instalation.
6 ปีที่แล้ว +4
Thanks for the super-helpful video! It enabled me to replace the factory radio with a mechless Kenwood KMM-BT304 today. I have a 2003 Opel Agila with a conventional ignition key, so I had to switch red and yellow.
@@Viikk785 You can buy an adapter that you connect exactly the same but it also has a port for the wheel controls. Just search corsa c wheel control adapter and they come up for like £20 or if you still have the stock radio you can buy the full kit for £30 on amazon so all you need to buy is a stereo and you are sorted.
i have got a 2003 corsa club there is old wireing but i want to put a cd30 vauxhall cd in but the block on the cd30 is different wireing what part do i need to adapt it.thanks.
Hi, I've got a CDR 2005 that won't enter the code...as in, pressing the AS and power button won't do anything (with ignition on). I was thinking of buying a similar unit with the code but it's really expensive. I think just buying an adapter kit and a used aftermarket unit will be cheaper...seems to be pretty easy to install it by looking at it here.
Thanks for this really helpful video. However, if I want the steering wheel controls to work, how do i go about doing so? Do i need another connection of some sort?
I am looking to replace my unit like this in my 2009 Utility, does the clock/radio face above the Hazards and airvents still work even though the Radio Isnt connected?
Hey man, really helpful video, appreciate it, you helped me to finally change my old radio to new one because it wasnt working, everything is perfect 👍🏻, love you ❤️
I have just installed a sony stereo to to my corsa c and i am having a memory problem. Everything works great, i can turn the ignition off and it beeps to remind me about the face, i turn the car back on and everthing is still saved, although when i turn the ignition off for more than roughly 2 minutes it factory resets? I swapped the red and yellow as i am supposed to and connected everything how you have and how many other tutorials showed. Anyone know the problem?
Sounds like you canstant live is connected to the wrong colour. Make 100% sure your newly wired in switched power does to the radios switched power and then swap the bullet connector so that constant power is going to the radios constant. I see this a lot because after patching in the new switched power from the fuse box you end up with three power cables.
@@PJsprojects Sorted the problem not long after commenting. It was what you said. I have an 02 corsa but the red and yellow didnt need switching like i thought.
Does it work with every opel corsa c? When i searched it and checked for the fp-19-00 S (dont want autoleads cause of the big shipping), and i put my model it shows me "This part is not compatible with Opel Corsa C 2003 C [2000-2006] Box Box 1.4 1364ccm 90HP 66KW (Petrol)" Is it so deferent or am i super finicky??
You could try another brand like Connects 2 if the shipping is to high. www.halfords.com/technology/car-audio/stereo-fitting-accessories/vauxhall-black-fascia-plate-ct24vx01?istCompanyId=b8708c57-7a02-4cf6-b2c0-dc36b54a327e&istItemId=-xwwarwmtip&istBid=t&_$ja=tsid:94971|cid:868555897|agid:49387676812|tid:aud-297219197929:pla-331764450417|crid:203456299599|nw:g|rnd:10711635519364893239|dvc:c|adp:1o1|mt:|loc:1006674&gclid=Cj0KCQiAjszhBRDgARIsAH8KgveKcbxzTka_PaDo-Tdw2FhbUbvR5dob6xwxSDXSwEQa1ydNalNsq20aAjfEEALw_wcB
Sounds like maybe a previous owner has put something other than release keys in the holes. This does tend to break the release mechanism and so a lot more force on the sides of the radio is required to remove what will be a mangled mess each side.
Not without a steering control adapter such as this - www.ebay.co.uk/itm/Steering-Control-Adaptor-CAR2003-2004-CCR2006-CDR2005-For-Vauxhall-Corsa-2004/370830464224?epid=565045463&hash=item565737d4e0:g:~ucAAOSwzcNb7Cpc
Ok so I've got a Corsa C dual fuel 2005 with the same style key. However my stock radio is the CD30. Can I use the same kit and similar unit and not have to bother with getting another power source from the cigarette lighter socket?
Every aftermarket unit I have ever seen needs two power sources,one constant power for the memory and one switched power for the unit to function. So yes you will need to run a power cable from a switched source and yes I have seen people use the cigarette lighter socket power for this.
Installing a new radio like that one ,I have to forget about the steering control ?! There is no way to do connect it like the original radio was connected ?
No you can but interface units to allow the steering controls to still work. Example - www.ebay.co.uk/itm/CTSVX001-2-RADIO-STEERING-WHEEL-STALK-ADAPTOR-CONTROL-FITS-VAUXHALL-ASTRA-CORSA/293087233713?hash=item443d5c46b1:g:tqoAAOSwV69c2YEJ
Both red and yellow wires than are in the wiring loom that came with the new radio should have bullet connections in them, simply pull apart the connector and swap so that red goes to yellow and yellow goes to red.
Hi, I was wondering if you're able to help at all. I have a corsa b (1998) with a Sony CD player fitted. I also have a parrot fitted but they are both controlled by the ignition. Is there a way to separate them so that i Don't lose all of my pre set channels every time I turn the ignition off but keep the parrot powered by ignition only? Kind regards Nathan.
On the wiring to the Parrot kit you will see two black fuse holders,one is in a red cable and one is in a yellow cable,undo both fuse holders(they untwist to get the fuse out) swap the top parts over so that red cable goes to yellow and yellow cable goes to red. In other words switch over the cables where the fuse joins them,this will then make sure you keep your radio stations and also if the Parrot kit has a screen it should display goodbye when the ignition key is removed.
I got the same sony a400bt as you i did exactly what you did with the yellow and red wire change thing, but still it wont save the settings. any ideas why?
In that case you need to get hold of a multimeter and test that the backup power feed is always constant live and not cutting out after a certain amount of time. It's not uncommon for this model of Corsa to have either ignition switched power faults or constant power faults. Either are easy to bypass,just fine a new constant power feed from you fusebox and tap in to that with a fuse spur to supply power to your radio.
Thanks for the helpful tutorial was the iso harness number you mentioned for the later wiring or earlier version iv been buggered with the later wiring and need the earlier wiring if that makes sense
The early Corsa is on factory ISO connection that will plug directly in to the new radios cable. Just swap red and yellow power cables over so that red goes to yellow and yellow goes to red. Most have bullet connectors in the middle of the power wires to make this easy to do.
PJs projects Ok great thanks. Was just a little confused due to I got sent a wiring harness with my new stereo. Will I have to use that harness or just use the wire from the original stereo connecting it into the new stereo? Is that easier?
Sounds like you either connected both the yellow and red cables to a constant live circuit or your ignition switched output has gone faulty(very common on Corsa C. If this is the case you will need to find a switched ignition source at the fusebox and spur off from that.
You will need this type of thing really - www.ebay.co.uk/itm/Vauxhall-Opel-Astra-H-2004-2010-PIONEER-Car-Stereo-Steering-Wheel-Interface-Kit/272349909234?hash=item3f6951d0f2:g:0KIAAOSw5KFbRyIa
hi i live in mexico and i have a corsa 2007 i would like to change the autostereo of the way you executed it but where i live they do not sell these accessories like the harness and the cover or front of a din to put my new stereo you support me with giving me data where I can buy these products ,,,, thank you very much
Try this - www.ebay.co.uk/itm/FP-19-00S-Vauxhall-Corsa-2000-2005-Car-Stereo-Fascia-Full-Fitting-Kit-Silver/300989118840?hash=item4614597978:g:HWcAAOxyZwpSWrMR
very helpful video mate. could u tell me the parts i would need to fit a new KENWOOD DPX-5000BT unit in my VAUXHALL CORSA D (2008) with SILVER CD30 MP3 factory unit. many thanks.
Hi. Yes sure you would need a kit like this - Item number 381704061628 - Kit includes adaptor to run steering controls if needed. Seller assumes all responsibility for this listing. www.ebay.co.uk/itm/FK-8412-C-VAUXHALL-CORSA-D-2006-ONWARDS-SILVER-DOUBLE-DIN-FASCIA-STALK-KIT-/381704061628?epid=1777965837&hash=item58df55c2bc:g:FkcAAOSwZVlXik~- Or find those parts cheaper but make sure you get the 103mm cage kit because the cage that comes with your Kenwood is 113mm high and so is to large for the car.
PJs projects www.ebay.co.uk/itm/381161608618 this kit comes with the regular wiring harness (witout steering controls). i think i will buy this kit as its the cheapest i can find with everything included. thanks.
These adapters are available from places like Ebay,car shops,Amazon - www.ebay.co.uk/itm/Vauxhall-Vivaro-ISO-Lead-Wiring-Harness-connector-Stereo-Radio-adaptor-PC2-85-4/150996753556?epid=1905523008&hash=item23281b9c94:g:uPEAAOSwzaJX28Os
If your car is the older normal iso block wiring (jagged edge ignition key instead of the later smooth edge ignition key) then you will need this type of interface to make the steering wheel controls work. www.ebay.co.uk/itm/CTSVX001-2-Steering-Stalk-Control-Interface-Lead-KENWOOD-Corsa-C-00-06/112545472058?epid=1405428979&hash=item1a343b9e3a:g:-MoAAOSwH35Zpqfn Also needed will be a short 'patch' cable for whatever make of radio you buy,such as Sony,Kenwood and make sure the radio has an output for steering controls becuase a lot don't.
Thanks for the video... It took me an hour to realize that you have to put the yellow and red cables together. I was already desperate 🤣🙈.... Opel Vectra C 1.8 Z18XE Greetings from Germany ✌️
I'm guessing your either on about the max wattage input for the standard speakers or looking at upgrading the standard speakers but keeping the original radio?
La verdad que entre haber el video para ver el final,,,,, porque en realidad no entiendo ni verga de lo que esta hablando..... Saludos desde Ecuador 💛💙❤
![เปิดใจ "อาจารย์เบียร์ คนตื่นธรรม" อดีตเคยสุดทุกทาง ถ้าใช้หนี้หมดไปบวชแน่ l [Nickynachat]](http://i.ytimg.com/vi/IxeE0xVhy08/mqdefault.jpg)
Just perfectly installed for the 1st time ever using your instruction. Thank you PJ
LEGEND! Installed a radio into my Zafira and it wasn’t saving the settings, changed the wires after watching your video when bobs your uncle!
I know this is an older video but it really helped. Very clear instructions. Thanks so much :)
Thanks for this vid, PJ, very helpful. Didn't work for me tho: My new radio gets hot and no sound. I read it gettin hot has to do with speaker wiring. My connector cable has an additional orange cable at the black speaker plug. Do I just cut it? Thanx!
My corsa 02 i just bought the radio cd player for the car was in safe mode. I had 2 metal keys for my old ford ka so i cut the keys in half and put them in the holes. And voila i managed to pull the radio out and thank god the code was written on the casing. Happy days got it working and happy with the factory cd radio. But good to know if you want a better system great video.
Hi, thx forntge instruction. Wehre can i get those hooks from that you're using to pull the radio out of ?
Hi! First off, thanks for the helpful vid! I have one problem though, my new radio doesnt turn on at all, the old one works perfectly fine, so im guessing it has something to do with the adapter, could you suggest something?
No power is caused by two possibilities. One is no good earth (black cable) the other is one of the two power cables are not getting 12volts, one is red the other is yellow. Check your car owners manual for radio fuse first.
Thanks for the quick reply, I'll check it out!@@PJsprojects
Just build in a radio in my Corsa C just like you did in this video, and it works like a charm. Many thanks for uploading this video. Greetings from Holland. 😉
MJFSimRacingVideo's mag ik vragen waar jij zo'n inbouw frame gekocht hebt in NL? Alvast dank!
Grensgeval Ja dat mag zekers. Kijk hier maar eens;
www.winparts.nl/interieur-bekleding/inbouwframes-radio/opel/corsa-c-f08-f68-bouwjaar-2000-09-2009-12/c1779-588-14693.html
MJFSimRacingVideo's dank voor de snelle reactie!
Grensgeval geen probleem. Lang leve de pushmeldingen, anders had ik er waarschijnlijk nooit meer naar gekeken. ;)
Heb jij ook die rode en gele draad omgewisseld? Zoals in het filmpje te zien is?
have you got a video for the corsas with the newer wiring? i have a 2006 corsa and just can’t figure out how to get the power into the radio everything is wired correctly but i guess there is no ignition power from the red cable in the ISO harness
hi, would it be possible to link the cables and any other parts used? thanks a lot
also, where would i find the plastic trim? thanks again
I need it too
Well presented and explained...... 10/10 👍🏽
Question? When installing an after marker head unit like this, doed the LCD screen still wrk?? Ie show radio stations, settings etc???
No.
I know this is an old video, but thank you so much as this has helped me install a new radio, however could you explain how to swap the wires around so that the radio will store stations please? Thank you x
The cable that comes with the new radio has a yellow cable and a red cable, both these should have a joint in the middle that pulls apart.
Pull apart both wires at the centre joint and swap them so that red joins yellow and yellow joins red.
I’m getting an «antenna error» after I’m done, is that because i dont have a DAB antenna (2003 corsa c)
Hello, i'm curious if it shows "SAFE MODE" after the instalation.
Thanks for the super-helpful video! It enabled me to replace the factory radio with a mechless Kenwood KMM-BT304 today. I have a 2003 Opel Agila with a conventional ignition key, so I had to switch red and yellow.
Hello, is this a 2003 corsa?
very nice, but how about steering wheel controls?
Rafael Silva did you manage to get it done? If so, how?!
Yea same question..
@@Viikk785 You can buy an adapter that you connect exactly the same but it also has a port for the wheel controls. Just search corsa c wheel control adapter and they come up for like £20 or if you still have the stock radio you can buy the full kit for £30 on amazon so all you need to buy is a stereo and you are sorted.
Did you need to make any connection to the ignition lighter? Have you ever have any issue with it, for instance after a battery replacement? Thanks.
No that's for earlier corsa c 2000 to 2003. From 2004 to 2006 you don't need to tap in cigarette lighter
i have got a 2003 corsa club there is old wireing but i want to put a cd30 vauxhall cd in but the block on the cd30 is different wireing what part do i need to adapt it.thanks.
Thanks a lot. Buy will you please tell me how to get the release key?
Hi, I've got a CDR 2005 that won't enter the code...as in, pressing the AS and power button won't do anything (with ignition on). I was thinking of buying a similar unit with the code but it's really expensive. I think just buying an adapter kit and a used aftermarket unit will be cheaper...seems to be pretty easy to install it by looking at it here.
Yes much cheaper to get an aftermarket head unit and easy enough to install.
Hey mate can you use the Original cage I got one of this Apple play units and need to screw it in so it won’t move
Anything is possible but tbh it's a no.
@@PJsprojects damn any way I can put it in there solid I stead of packing it with cardboard
very informative, thank you
Will any double block opel to iso harness work or does it have to be that specific one?
Any of the same configuration will be fine.
Thanks for this really helpful video. However, if I want the steering wheel controls to work, how do i go about doing so? Do i need another connection of some sort?
I'm facing the same probelm
You need steering wheel control adapter. On ebay
I am looking to replace my unit like this in my 2009 Utility, does the clock/radio face above the Hazards and airvents still work even though the Radio Isnt connected?
Hi, the temp & clock part will still work but the middle bit where the radio station is normally displayed will be blank.
Hey man, really helpful video, appreciate it, you helped me to finally change my old radio to new one because it wasnt working, everything is perfect 👍🏻, love you ❤️
I have just installed a sony stereo to to my corsa c and i am having a memory problem. Everything works great, i can turn the ignition off and it beeps to remind me about the face, i turn the car back on and everthing is still saved, although when i turn the ignition off for more than roughly 2 minutes it factory resets? I swapped the red and yellow as i am supposed to and connected everything how you have and how many other tutorials showed. Anyone know the problem?
Sounds like you canstant live is connected to the wrong colour. Make 100% sure your newly wired in switched power does to the radios switched power and then swap the bullet connector so that constant power is going to the radios constant.
I see this a lot because after patching in the new switched power from the fuse box you end up with three power cables.
@@PJsprojects Sorted the problem not long after commenting. It was what you said. I have an 02 corsa but the red and yellow didnt need switching like i thought.
How come you dont need a red power cable to the cigar socket wired or the fuse box?
If possible, you can help me with the details of the store or the link where I can buy these products online. I would greatly appreciate it.
Ace advice, couple of really useful tips were very helpful as not come across the same issues doing similar job on different cars. Thanks.
Does it work with every opel corsa c? When i searched it and checked for the fp-19-00 S (dont want autoleads cause of the big shipping), and i put my model it shows me
"This part is not compatible with Opel Corsa C 2003 C [2000-2006] Box Box 1.4 1364ccm 90HP 66KW (Petrol)" Is it so deferent or am i super finicky??
You could try another brand like Connects 2 if the shipping is to high.
www.halfords.com/technology/car-audio/stereo-fitting-accessories/vauxhall-black-fascia-plate-ct24vx01?istCompanyId=b8708c57-7a02-4cf6-b2c0-dc36b54a327e&istItemId=-xwwarwmtip&istBid=t&_$ja=tsid:94971|cid:868555897|agid:49387676812|tid:aud-297219197929:pla-331764450417|crid:203456299599|nw:g|rnd:10711635519364893239|dvc:c|adp:1o1|mt:|loc:1006674&gclid=Cj0KCQiAjszhBRDgARIsAH8KgveKcbxzTka_PaDo-Tdw2FhbUbvR5dob6xwxSDXSwEQa1ydNalNsq20aAjfEEALw_wcB
I have the keys to extract the radio but even by applying a force inward or outward the radio does not come out how to do it?
Sounds like maybe a previous owner has put something other than release keys in the holes.
This does tend to break the release mechanism and so a lot more force on the sides of the radio is required to remove what will be a mangled mess each side.
Thank you, I just succeeded at the time of the answer but the video helped me a lot. Thanks
do you have to swap the red and yellow wires?
where can i get the release keys
Is a Opel combo the exact same?
Will the controls on the steering wheel still work ??
Not without a steering control adapter such as this - www.ebay.co.uk/itm/Steering-Control-Adaptor-CAR2003-2004-CCR2006-CDR2005-For-Vauxhall-Corsa-2004/370830464224?epid=565045463&hash=item565737d4e0:g:~ucAAOSwzcNb7Cpc
Ok so I've got a Corsa C dual fuel 2005 with the same style key. However my stock radio is the CD30. Can I use the same kit and similar unit and not have to bother with getting another power source from the cigarette lighter socket?
Every aftermarket unit I have ever seen needs two power sources,one constant power for the memory and one switched power for the unit to function. So yes you will need to run a power cable from a switched source and yes I have seen people use the cigarette lighter socket power for this.
PJs projects thanks for replying but I didn't see you doing that in your video. Did you get another power source off camera?
Installing a new radio like that one ,I have to forget about the steering control ?! There is no way to do connect it like the original radio was connected ?
No you can but interface units to allow the steering controls to still work.
Example - www.ebay.co.uk/itm/CTSVX001-2-RADIO-STEERING-WHEEL-STALK-ADAPTOR-CONTROL-FITS-VAUXHALL-ASTRA-CORSA/293087233713?hash=item443d5c46b1:g:tqoAAOSwV69c2YEJ
PJs projects yow PJ , thanks man . Gonna give it shot hopefully I wont fuck up the whole car hahaha
How do you swap round the red and yellow wires, I can’t seem to do it
Both red and yellow wires than are in the wiring loom that came with the new radio should have bullet connections in them, simply pull apart the connector and swap so that red goes to yellow and yellow goes to red.
Does it need a lot of force to pull them out? Feels like I’m going to break the wiring
@@owenparker1219 not really no.
Would this work on a 2002 astra?
Hi,
I was wondering if you're able to help at all. I have a corsa b (1998) with a Sony CD player fitted. I also have a parrot fitted but they are both controlled by the ignition. Is there a way to separate them so that i Don't lose all of my pre set channels every time I turn the ignition off but keep the parrot powered by ignition only?
Kind regards
Nathan.
On the wiring to the Parrot kit you will see two black fuse holders,one is in a red cable and one is in a yellow cable,undo both fuse holders(they untwist to get the fuse out) swap the top parts over so that red cable goes to yellow and yellow cable goes to red.
In other words switch over the cables where the fuse joins them,this will then make sure you keep your radio stations and also if the Parrot kit has a screen it should display goodbye when the ignition key is removed.
Will this work if the radio is in safe mode?
Yes will work work fine.
sorry guys butt I don't see him using the iso adapter only the kabel of the radio direct or
do i don't understand something here
Cheers mate already had the surround just never fitted a aftermarket knowledge is power hahahaa
I got the same sony a400bt as you i did exactly what you did with the yellow and red wire change thing, but still it wont save the settings. any ideas why?
In that case you need to get hold of a multimeter and test that the backup power feed is always constant live and not cutting out after a certain amount of time.
It's not uncommon for this model of Corsa to have either ignition switched power faults or constant power faults. Either are easy to bypass,just fine a new constant power feed from you fusebox and tap in to that with a fuse spur to supply power to your radio.
Does it matter if the current corsa radio is locked?
No not at all.
Thanks for the helpful tutorial was the iso harness number you mentioned for the later wiring or earlier version iv been buggered with the later wiring and need the earlier wiring if that makes sense
The early Corsa is on factory ISO connection that will plug directly in to the new radios cable. Just swap red and yellow power cables over so that red goes to yellow and yellow goes to red. Most have bullet connectors in the middle of the power wires to make this easy to do.
PJs projects thanks for your help
Wen I move the car the radio switch of end on wen I stop then working normal what is the problem?
Connectors must be loose
The wiring which you connect into the blue clips with a cable tie, is that wiring found in the original Corsa stereo?
Yes that's correct,you don't really need to use a cable tie but I have known them to work loose without one.
PJs projects ok so I won't have to buy that wire? Just use the one out the original stereo.
Correct,just plug in the cable that comes with the new radio but don't forget to swap over the red and yellow cables so the power is right.
PJs projects Ok great thanks. Was just a little confused due to I got sent a wiring harness with my new stereo. Will I have to use that harness or just use the wire from the original stereo connecting it into the new stereo? Is that easier?
Cheers pj u legend
My radio doesnt go off when i remove the key from the ignation. what did i miss? Corsa C 2005 silverline
Sounds like you either connected both the yellow and red cables to a constant live circuit or your ignition switched output has gone faulty(very common on Corsa C. If this is the case you will need to find a switched ignition source at the fusebox and spur off from that.
Did you disconnect the battery for doing that?
Nope,not for fitting a radio.
What about the newer wired one please. Been trying to do my steering wheel controls for months, your vid is so helpful just wish it was for my car lol
You will need this type of thing really - www.ebay.co.uk/itm/Vauxhall-Opel-Astra-H-2004-2010-PIONEER-Car-Stereo-Steering-Wheel-Interface-Kit/272349909234?hash=item3f6951d0f2:g:0KIAAOSw5KFbRyIa
hi i live in mexico and i have a corsa 2007 i would like to change the autostereo of the way you executed it but where i live they do not sell these accessories like the harness and the cover or front of a din to put my new stereo you support me with giving me data where I can buy these products ,,,, thank you very much
Try this -
www.ebay.co.uk/itm/FP-19-00S-Vauxhall-Corsa-2000-2005-Car-Stereo-Fascia-Full-Fitting-Kit-Silver/300989118840?hash=item4614597978:g:HWcAAOxyZwpSWrMR
This work on my 06 active corsa?
2006 is the cross over year for the newer model but the basics are the same for both the older pre 2006 model and the post 2006 model.
Does anyone know what connectors I'd need to fit a 2004 vaxhall Corsa sxi cdplayer to fit in my vaxhall Corsa comfort
Omg I've been trying to get one of these release keys in for the last 10 minutes it will not go!! 😭
Try tapping the release key in with the handle of a screw driver,they tend to sort of pop in if done that way.
very helpful video mate.
could u tell me the parts i would need to fit a new KENWOOD DPX-5000BT unit in my VAUXHALL CORSA D (2008) with SILVER CD30 MP3 factory unit.
many thanks.
Hi.
Yes sure you would need a kit like this - Item number 381704061628 - Kit includes adaptor to run steering controls if needed.
Seller assumes all responsibility for this listing.
www.ebay.co.uk/itm/FK-8412-C-VAUXHALL-CORSA-D-2006-ONWARDS-SILVER-DOUBLE-DIN-FASCIA-STALK-KIT-/381704061628?epid=1777965837&hash=item58df55c2bc:g:FkcAAOSwZVlXik~-
Or find those parts cheaper but make sure you get the 103mm cage kit because the cage that comes with your Kenwood is 113mm high and so is to large for the car.
PJs projects
will this kit be ok if i dont want to use my steering controls???
www.ebay.co.uk/itm/360774368367
Yes will work fine but you could get one cheaper without the steering control bits.
PJs projects
www.ebay.co.uk/itm/381161608618
this kit comes with the regular wiring harness (witout steering controls).
i think i will buy this kit as its the cheapest i can find with everything included.
thanks.
would most car stereos fit into the frame?
Yes,car stereos are either the smaller size which is called Din-D or the bigger size which is Double-Din.
thanks :)
Thanks for help .
where you by adaptor ?
These adapters are available from places like Ebay,car shops,Amazon - www.ebay.co.uk/itm/Vauxhall-Vivaro-ISO-Lead-Wiring-Harness-connector-Stereo-Radio-adaptor-PC2-85-4/150996753556?epid=1905523008&hash=item23281b9c94:g:uPEAAOSwzaJX28Os
PJs projects in your video is another adaptor ! I buy this adapter that you sent and it does not match,
So the multifunction steering wheel won't work ?
If your car is the older normal iso block wiring (jagged edge ignition key instead of the later smooth edge ignition key) then you will need this type of interface to make the steering wheel controls work.
www.ebay.co.uk/itm/CTSVX001-2-Steering-Stalk-Control-Interface-Lead-KENWOOD-Corsa-C-00-06/112545472058?epid=1405428979&hash=item1a343b9e3a:g:-MoAAOSwH35Zpqfn
Also needed will be a short 'patch' cable for whatever make of radio you buy,such as Sony,Kenwood and make sure the radio has an output for steering controls becuase a lot don't.
PJs projects Thanks, I have a 2002 corsa, so it should be the older model.
Yes should be the older one.
SovetskyCCCP did you install steering controller cables? Did it work for you
@@PJsprojects Do they still light up if you dont bother with the adapter?
Thanks for the video... It took me an hour to realize that you have to put the yellow and red cables together. I was already desperate 🤣🙈....
Opel Vectra C 1.8 Z18XE
Greetings from Germany ✌️
interesting video
You're a legend 🙂👍
How meny w i need to put maximum for corsa 2003 ?
I'm guessing your either on about the max wattage input for the standard speakers or looking at upgrading the standard speakers but keeping the original radio?
thank you!
Is the kit compatible with Corsa C 2003 ?
Yes,fully.
PJs projects Thanks
thanks
Can you do this on a 55 meriva?
Yes,the Meriva is based on the Corsa so this video will be relevant to your own car.
helloe pjs project can you sen link to that radio ?
Sure -
www.ebay.co.uk/itm/Sony-DSX-A400BT-Bluetooth-Handsfree-Aux-USB-MP3-Andoid-iPod-iPhone-Car-Stereo-/191923239192?hash=item2caf843918:g:PZoAAOSwARZXiO8g
thanks you
Can u send me the links to all the parts please
www.ebay.co.uk/itm/Stereo-CD-Radio-Wiring-Harness-Aerial-Adaptor-For-Vauxhall-Corsa-C-CC20-CD30/350823969303?epid=1405325111&hash=item51aebcf217:g:H74AAOSwLnBX4mhJ
www.amazon.co.uk/Stereo-Radio-Fascia-Surround-Adaptor/dp/B074S6KK5H/ref=sr_1_5?ie=UTF8&qid=1509268910&sr=8-5&keywords=corsa+c+radio+adaptor
La verdad que entre haber el video para ver el final,,,,, porque en realidad no entiendo ni verga de lo que esta hablando..... Saludos desde Ecuador 💛💙❤
Battlefield 1 dogtag jackfrags 😊😎
👍
When taking a video/photo, never shoot in direction to the sun..
Keys won't even open it old car never easy