Keystone Science hey greetings from germany:) maybe you can show a circuit that makes 110/220v AC from 12or 24v DC as an backup divise ? I really Like to build one but im not good in Electronics:(
Yeah I have a problem. I want to re-create this project but my Flyback transformer has 4 PINS, witch is confusing, but I have the connections marked secondary+ secondary- and Primary. but how am I gonna wire this? and I don't have an old TV so where can I get that exact flyback transformer? Please let me know. 👇😃
I wasn't able to get this at first, so I plotted out each possible wire combination... there were twelve. I got it on the sixth try. Love this channel.
I'm a welder, and I think after seeing this video, it would be cool for you to make a video with a power supply of this nature, to create a small, portable, welder. Nothing extravagant, just something that could tack together something thin, like 20 gage sheet metal. Either that, or make a battery powered, plasma, soldering iron. Either of those would make my day lol.
The DC versions have the Cockroft-Walton array inside of them, while the AC versions have it outside as a separate unit. It is an interesting voltage multiplier which can be made into any number of stages resulting in multiplying AC voltages (into DC) by any number you want. This device can be used to feed a Marx generator for really high pulse voltages.
You are now the official High Voltage guy.......Keep it up......
7 ปีที่แล้ว +1
you should make a heatsaw. it uses NiCr or nichome (the stuff insids toasters and ovens) that converts electricty to heat with profound efficiency. a fully mobile self-contained heat saw would be dope.
I hope that everyone notices that he was using the chicken stick the first try, but then was not using the chicken stick on his second try (5:46) and ended up getting shocked because of it. Always use a chicken stick.
4:42 It's a good practice, but the longer the stick is, its easier too loose control on it, slip it, and make high voltage short :D I advice using medium one, with caution and common sense.
Have you considered immersing the cfl circuit & the flyback xmfr in mineral oil?Also you can add a 30kv or larger capacitor from the flyback xmfr output for larger sparks.
Hey, isn't CFL-circuit's output also AC so that it can drive transformer? I had a couple problems with setup like this. First, all my CFL circuits could detect if there was a tube attached and worked only if it was. I found that putting a capacitor across a pair of pins attached to the same end of the tube (to heat electrodes?) works fine, and shorting them with alligator clip did the job too. Next, if i play with HV more than few minutes, transformer on a circuit starts getting very hot and then something on the bottom side burns up/explodes (i think some CMD resistor gets damaged by heat). How can i work around the overheating? Maybe a circuit from more powerful bulb would last longer before dying? or was it that i shorted these pins?
Does it matter the wattage of the CFL bulb you get the board from? Using a high voltage transformer from a CRT TV, why not rig up plazma display inside the CRT so it can be seen jumping around all over inside the screen? It would be impressive yet safely contained.
The stable purple arc looks more like AC. Normally, with DC high voltage, the arc is irregular and loud. Is it possible the tripler in this high voltage transformer was not working? I made similar high voltage device from compact fluorescent. I let the fluorescent connected as a way to indicate that the circuit is still working. I connect the primary of the CRT high voltage transformer in series with the main inductance of the compact fluorescent.. Doing this, there is no question about overloading any part of the electronic. I like the videos you made (I just found a link today, watched about 5 videos). Contrary to many other youtuber, your projects are working for real. It is not click bait with clever video editing. I would like if you would use the standard 10^3 names for resistances, frequency, etc. For example, 5 kilo ohm instead 5 thousand ohm (or say both if you think it would allow other users to understand better).
Great video. I've done this project and it worked out well. But the arks are very small, they do not even get to stretch 1 centimeter and the datasheet of my converter says that this produces 26 KV. Could it be because my fluorescent light bulb is small? If you have any idea what this could be, please tell me.
Maybe you can help but I have tried your configurations with the flyback transformer and I didn't get any arcs. Also when I took my multi meter to test the connection of the flyback for the large secondary the large the wire didn't beep with any of the pins so is my flyback broken or is there a secret I am missing
were do you get your crt tv? i had a fly back but i broke it. also can you get a satilite dish and make an fm transmitter and try and pick it up with your fm reciver
No, if you hook the output of one CFL to the mains input of another you will fry the other, most spectacularly. You can't use them in parallel either. If you want more power go with a higher wattage CFL, or go with a true flyback driver like the ZVS driver. I've used a 55 watt large CFL circuit, equivalent to a 300 watt incandescent lamp, with some good results. An electronic ballast for large straight tube fluorescent lamps puts out a lot of power but only the largest and most robust flybacks can handle it without shorting out internally. If you do go with a more powerful driver please make sure you know what you're doing and be careful.
Have you run this setup for any length of time? I was wondering if anything got excessively hot. I always wanted to make a Jacob's ladder but would like to run it for a reasonable length of time like 15 minute stretches of time. Please advise. Thank you. I just discovered you channel. Going to check out more after leaving this.
+jp040759 hmm, I have not run it for long. I think it would die fast to be honest. It's probably better to use a FL ballest, or a ZVS set up ( I have a video on both of those if you need ) as those can run for much longer, and even produce more I think
nice arcing the one you achieved, mine turned out shorter using a 30 watt ballast and a flyback transformer found in a 20 something inch CRT. Why is it that when adding a capacitor between both primaries in the flyback I got longer arcs but the cfl circuit died as soon as I stretched the arc far enough to leave the circuit open?
Maybe I missed it.. but what was the purpose of taking out the circuit from the bulb? What purpose does it serve in this exactly? Is it just to start with a higher voltage than mains?
I tried at least five times to use the CFL circuit but for some reason, it wouldn't power the flyback transformer. Using a light ballast worked finally got it up and running.
It's no where near efficient because resonant frequencies of CFL LC tank and flyback don't match. It will drive power through a Flyback but not efficiently like the DC square wave the TV circuit uses that is at the 15 kHz or so flyback resonant frequency, unless it's a computer monitor/small TV flyback which can be 30-45 kHz or more. Most CFL's operate anywhere from 25 kHz up to 100 kHz, but avoid the 32 kHz range so as to not interfere with remote controls.
Hi Keystone! I have been reading some information about T.T. Brown (Thomas Townsend Brown.). His experiments involved using high voltage 20,000 volts and higher with conductive materials inlaid with non conductive materials (as in metal and wood held together with beeswax in 8 alternated layers) to create a force that caused it to move. Is that actually a thing? Can high voltage create a force that can propel an object? If so. Can you show is how that works? I ask a lot I know. But it sounds so cool! Thanks KS! You're the best!
thanks man, i'm from India as well!....also,i was wondering if there was a way to find the primary of the transformer without a multimeter, as mine is showing a resistance of 7 Ohms when i'm touching the leads to themselves(cant trust it)
Ehh, voltage delivers it, but current is ultimate what kills, kind of? It’s really power so it can be viewed in so many ways, but ultimately the flow of electrons is what does it
Keystone Science Thanks for your answere! Yeah ur probably right since ur like really smart. I dont really know what im talking about so i’ll leave the job about electronics over to you, thanks again.
Nice work. I love the way you explain everything with their proper working science. Bro I've a suggestion for you- If you connect a starter(it was used with old fluorescent ballast that had only two output pins for the tubelighr)in parallel with the primary coil then the output will be 2x higher in terms of voltage. You can use it with flourescent ballast or even with cfl ballast. But I don't know the reason for it's working. If you could please explain it explain it I'll be happy. I have a question- is it necessary that the primary of the flyback has the highest resistance? When I connect the input of the flyback to the first two pins from the right (U) the arc is 1 mm long but when I connect the input to the 1st and 3rd pin from the right then the arc is 1.5cm long. Is it that the primary is the coil between 1st and the 3rd pin from the right?
l make flyback from odd tv transformer driving it with 85w cfl but when l connected a capacitor across the primary the output voltage increases but suddenly the cfl blow, why did it happens so?
Ack! Too much! The first 13W ballast only worked VERY weakly once or twice for an instant. The second ballast was 14W (woopty doo) and it instantly start humming and throwing 3cm pink and purple arcs. I backed the wires further apart and at 4cm it stops the arc but continues with both tips creating angry corona fans. Backed it to 6cm and still corona hiss fanning out and angry hum. I wanted this thing for a few KV. I can go fire up the CO2 laser power supply for this angry stuff. Any ideas on the quickest way to tone it down? There is corona even coming off the bottom of the flyback.
Can this flyback be converted to an ignition coil of a car or a motorcycle cuz if it can burn a paper maybe it can also burn a gasolin fuel in the combustion chamber of an engine .
i made a taser like the one you described in a different video, but instead of making lightning type arks, its making a high pitched squeaking and an ark just like this one. it can light things on fire, so im wondering why that might hapen.
+Erick Eagle yes, you can make a trimmer capacitor, try getting 2 plastic cups and putting tinfoil halfway around each, attach wires and place one cup inside the other, as you turn the cup so that the tinfoil becomes more or less overlapping it will change the capacitance! You could also just use a set capacitance value and calculate the frequency it will broadcast at from the formula I showed! Hope this helped ! :D
If it was just a regular step up transformer: A. You wouldnt even need the driver, just put in an AC current B. If it was a high voltage transformer (such as that of ignition coils, microwave transformers, or neon sign transformers) then it should work. However, if your transformer is not one of these, than you should get nowhere near the output voltage of the one shown in the video.
Excuse me sir!!! I wanna discuss you on a topic related to a flyback and cfl. I wanna know about the CFL how much watt CFL is required to operate A flyback. I am in trouble. Please reply soon!!!
Hey Guys! Join the Discord Chat! :D discord.gg/rvnbhNN
Keystone Science hey greetings from germany:) maybe you can show a circuit that makes 110/220v AC from 12or 24v DC as an backup divise ? I really Like to build one but im not good in Electronics:(
Keystone Science help me it worked but i had to plug the power in and out the hole time
Jackson Curren They ARE dangerous
Keystone Science OK I will join
Keystone Science I joined :3 Btw. You make soooo cool Videos! Keep doing so nice Videos!
CRT "Can be shocked" LOL that's an understatement. As always EXCELLENT video !!!!
+duf101101 haha xD thanks!
every time i learn something new . Happy subscriber
Thank you so much! This is way easier than building a driver circuit myself
Yeah I have a problem. I want to re-create this project but my Flyback transformer has 4 PINS, witch is confusing, but I have the connections marked secondary+ secondary- and Primary. but how am I gonna wire this? and I don't have an old TV so where can I get that exact flyback transformer? Please let me know. 👇😃
I wasn't able to get this at first, so I plotted out each possible wire combination... there were twelve. I got it on the sixth try. Love this channel.
I'm a welder, and I think after seeing this video, it would be cool for you to make a video with a power supply of this nature, to create a small, portable, welder. Nothing extravagant, just something that could tack together something thin, like 20 gage sheet metal. Either that, or make a battery powered, plasma, soldering iron. Either of those would make my day lol.
Welding requires very low gauge wire in order to not melt, making it difficult to make a mini welder
I did this with a flyback transformer from a 5 inch CRT. Worked perfectly!
I am lousy at building flyback drivers. This looks simple and handy enough for just testing bulbs and farting around. Thank you, Dr Keystone!
"and see which one it arks t-- Auw! okay..."
5:46 BTW
The DC versions have the Cockroft-Walton array inside of them, while the AC versions have it outside as a separate unit. It is an interesting voltage multiplier which can be made into any number of stages resulting in multiplying AC voltages (into DC) by any number you want. This device can be used to feed a Marx generator for really high pulse voltages.
Keystone, at one point in the future, we should consider a collaboration. Love your work. We specialize in HV up to 500kv.
+Plasma Channel yeah sure that would be fun! I'm down to any time!
Private message sent, good sir.
You are now the official High Voltage guy.......Keep it up......
you should make a heatsaw. it uses NiCr or nichome (the stuff insids toasters and ovens) that converts electricty to heat with profound efficiency. a fully mobile self-contained heat saw would be dope.
This is an idea I must try - thanks for your comment/suggestion!
underrated channel
a DC to AC easy homemade inverter .. i like those
شكرآ جزيلا على هذا الفيديو المفيد . تحياتي لك من تركيا.
awesome! I've been waiting for something like this
I hope that everyone notices that he was using the chicken stick the first try, but then was not using the chicken stick on his second try (5:46) and ended up getting shocked because of it. Always use a chicken stick.
4:42 It's a good practice, but the longer the stick is, its easier too loose control on it, slip it, and make high voltage short :D I advice using medium one, with caution and common sense.
Have you considered immersing the cfl circuit & the flyback xmfr in mineral oil?Also you can add a 30kv or larger capacitor from the flyback xmfr output for larger sparks.
Wow this is pretty cool and it's pretty easy too!
Hey, isn't CFL-circuit's output also AC so that it can drive transformer?
I had a couple problems with setup like this. First, all my CFL circuits could detect if there was a tube attached and worked only if it was. I found that putting a capacitor across a pair of pins attached to the same end of the tube (to heat electrodes?) works fine, and shorting them with alligator clip did the job too.
Next, if i play with HV more than few minutes, transformer on a circuit starts getting very hot and then something on the bottom side burns up/explodes (i think some CMD resistor gets damaged by heat). How can i work around the overheating? Maybe a circuit from more powerful bulb would last longer before dying? or was it that i shorted these pins?
Your videos are great young man keep it up. Been tinkering my whole life. ☺
Another fantastic video. Keep it up bro. Also, sick pen, haha.
thank Tommy!
A video about a >big< musical teslacoil would be great!!! :D
Will you make some video like this in the future?
Does it matter the wattage of the CFL bulb you get the board from?
Using a high voltage transformer from a CRT TV, why not rig up plazma display inside the CRT so it can be seen jumping around all over inside the screen? It would be impressive yet safely contained.
Thanks for the video, I'm trying to do this by myself 😁🤘🏻
100k already? Holy hell your channel is growing fast.
i wonder if you could put 2 of these in series or parallel to get double the voltage or current
The stable purple arc looks more like AC. Normally, with DC high voltage, the arc is irregular and loud. Is it possible the tripler in this high voltage transformer was not working?
I made similar high voltage device from compact fluorescent. I let the fluorescent connected as a way to indicate that the circuit is still working. I connect the primary of the CRT high voltage transformer in series with the main inductance of the compact fluorescent.. Doing this, there is no question about overloading any part of the electronic.
I like the videos you made (I just found a link today, watched about 5 videos). Contrary to many other youtuber, your projects are working for real. It is not click bait with clever video editing.
I would like if you would use the standard 10^3 names for resistances, frequency, etc. For example, 5 kilo ohm instead 5 thousand ohm (or say both if you think it would allow other users to understand better).
Great video. I've done this project and it worked out well. But the arks are very small, they do not even get to stretch 1 centimeter and the datasheet of my converter says that this produces 26 KV. Could it be because my fluorescent light bulb is small? If you have any idea what this could be, please tell me.
Maybe you can help but I have tried your configurations with the flyback transformer and I didn't get any arcs. Also when I took my multi meter to test the connection of the flyback for the large secondary the large the wire didn't beep with any of the pins so is my flyback broken or is there a secret I am missing
The project is nice I was seeking if you could come up with a video showing how a joule thief circuit works🎉
pls help me the transformer in the bulbs ciruit it only had two wire connection can it be useful as step up transformer ?..how ?.
Notification squad, Anyone else? :)
Circuit's Everywhere yep :D
NateBlanous :D
were do you get your crt tv? i had a fly back but i broke it. also can you get a satilite dish and make an fm transmitter and try and pick it up with your fm reciver
Great video! Could you make a video about voltage spikes and how to prevent it? Would be helpful.
can you put a few fluracent bulb circuit boards in series and increase the power
No, if you hook the output of one CFL to the mains input of another you will fry the other, most spectacularly. You can't use them in parallel either. If you want more power go with a higher wattage CFL, or go with a true flyback driver like the ZVS driver. I've used a 55 watt large CFL circuit, equivalent to a 300 watt incandescent lamp, with some good results. An electronic ballast for large straight tube fluorescent lamps puts out a lot of power but only the largest and most robust flybacks can handle it without shorting out internally. If you do go with a more powerful driver please make sure you know what you're doing and be careful.
Great video! how about showing every one how to build a bug zapper!
what's the output from the fluorescent circuit that you're connecting to?? like.. what's the voltage output that you're getting from it?
could i use an usual transformer instead of a flyback-transformer? (really not in the mood to carry one of these old tvs home)
Are there any differences (like lower power/ voltage) between this high voltage supply and the one with the big ballast block?
Hi Awsome video... Will this work on a 12v ignition coil
Perfect, I've been wanting to make a Jacob's ladder for a while and I have 2 flybacks spare. Ps. Nice watch.... Casio CA53W.. . I also wear one. 👍
Have you run this setup for any length of time? I was wondering if anything got excessively hot. I always wanted to make a Jacob's ladder but would like to run it for a reasonable length of time like 15 minute stretches of time. Please advise. Thank you. I just discovered you channel. Going to check out more after leaving this.
+jp040759 hmm, I have not run it for long. I think it would die fast to be honest. It's probably better to use a FL ballest, or a ZVS set up ( I have a video on both of those if you need ) as those can run for much longer, and even produce more I think
Thank you
What is the voltage on your primary coil;
i have all ofthese things lol but im afraid to try it
BIG QUESTION !! did heconect that florcent to 120volt outlet?? ???
Really amazing technique!!!
I liked it very much!!!
nice arcing the one you achieved, mine turned out shorter using a 30 watt ballast and a flyback transformer found in a 20 something inch CRT. Why is it that when adding a capacitor between both primaries in the flyback I got longer arcs but the cfl circuit died as soon as I stretched the arc far enough to leave the circuit open?
CFLs ballasts have a built-in self destruct for when the tube burns out, killing the fragile components in the circuit.
If i use a more powerful cfl bulb it will make bikker arcs?
Maybe I missed it.. but what was the purpose of taking out the circuit from the bulb? What purpose does it serve in this exactly? Is it just to start with a higher voltage than mains?
It makes a square wave that makes constant changing magnetic fields through the primary coil which drive the secondary coil to high voltages
Hi Keystone Science, I want to build one of these and apply it to make an outdoor rat trap. Could I use a 12 volt battery as the power source? TIA
I tried at least five times to use the CFL circuit but for some reason, it wouldn't power the flyback transformer. Using a light ballast worked finally got it up and running.
Thats awesome mate,,never know that cfl circuit works as plyback driver..now i know,,new subs here
Regards to all from Philippines
It's no where near efficient because resonant frequencies of CFL LC tank and flyback don't match. It will drive power through a Flyback but not efficiently like the DC square wave the TV circuit uses that is at the 15 kHz or so flyback resonant frequency, unless it's a computer monitor/small TV flyback which can be 30-45 kHz or more. Most CFL's operate anywhere from 25 kHz up to 100 kHz, but avoid the 32 kHz range so as to not interfere with remote controls.
wow!!!!!!!!!!!! I was thinking about this idea and going to do it !!!! nice
you should make a intro to electronics series
Hi Keystone!
I have been reading some information about T.T. Brown (Thomas Townsend Brown.). His experiments involved using high voltage 20,000 volts and higher with conductive materials inlaid with non conductive materials (as in metal and wood held together with beeswax in 8 alternated layers) to create a force that caused it to move. Is that actually a thing? Can high voltage create a force that can propel an object? If so. Can you show is how that works? I ask a lot I know. But it sounds so cool! Thanks KS! You're the best!
Sorry! Meant to leave the previous comment on your channel page! Love this video though! Thank you! Keep up the great work!
I have a few flybacks and I have noticed that on two of them the primaries are 0.5 ohm, not 1 ohm.
This is the stuff I wanted to build as a kid. Thanks! Im gonna build this!
Any time! I am glad :)
So... I have to connect the flyback to the pins that are connected to the capacitor?
can you explain what are the knobs for on the flyback?
i got a old foxtel satelite (12ghz) just wondering if you can make a cb uhf radio or wireless data transceiver
thanks
Very interesting video! Can I do the same thing with 230v input(to the bulb circuit)? or will that burn the coil?
BIT it will work. There's no difference. I'm from India and used a 220V rated cfl
thanks man, i'm from India as well!....also,i was wondering if there was a way to find the primary of the transformer without a multimeter, as mine is showing a resistance of 7 Ohms when i'm touching the leads to themselves(cant trust it)
7:08 "it doesn't have enough current to kill you"
electroboom, where are you?
Ehh, voltage delivers it, but current is ultimate what kills, kind of? It’s really power so it can be viewed in so many ways, but ultimately the flow of electrons is what does it
Keystone Science Thanks for your answere! Yeah ur probably right since ur like really smart. I dont really know what im talking about so i’ll leave the job about electronics over to you, thanks again.
@@KeystoneScience as long as you don't have 60+ volts at high current, or more than 0.005 amperes at high voltage, you should be good.
Nice work.
I love the way you explain everything with their proper working science.
Bro I've a suggestion for you-
If you connect a starter(it was used with old fluorescent ballast that had only two output pins for the tubelighr)in parallel with the primary coil then the output will be 2x higher in terms of voltage. You can use it with flourescent ballast or even with cfl ballast. But I don't know the reason for it's working.
If you could please explain it explain it I'll be happy.
I have a question- is it necessary that the primary of the flyback has the highest resistance? When I connect the input of the flyback to the first two pins from the right (U) the arc is 1 mm long but when I connect the input to the 1st and 3rd pin from the right then the arc is 1.5cm long. Is it that the primary is the coil between 1st and the 3rd pin from the right?
im pretty sure that the primary is the 1st and 3rd pins and the 2nd and 4th pins are the feedback
Are older flybacks more powerfull?
l make flyback from odd tv transformer driving it with 85w cfl but when l connected a capacitor across the primary the output voltage increases but suddenly the cfl blow, why did it happens so?
do you think an old computer monitor would have one of those transformers?
Anticonny would it just be smaller maybe?
Jake Waddoups hell goto a junk shop and buy the oldest biggest tube tv in the place it will have a huge transformer! ☺
Yes, but size doesn't really matter.
I never heard that one.
@@annelieseocallaghan801 exactly, it's not the size of the hammer, it's the nail you're swinging it at!
Scary Movie reference...
Ack! Too much! The first 13W ballast only worked VERY weakly once or twice for an instant. The second ballast was 14W (woopty doo) and it instantly start humming and throwing 3cm pink and purple arcs. I backed the wires further apart and at 4cm it stops the arc but continues with both tips creating angry corona fans. Backed it to 6cm and still corona hiss fanning out and angry hum. I wanted this thing for a few KV. I can go fire up the CO2 laser power supply for this angry stuff. Any ideas on the quickest way to tone it down? There is corona even coming off the bottom of the flyback.
If you have a soldering iron you may as well make a ZVS driver with two IRFP260Ns
+infeazhar inc. yeah, I've made one with 250Ns, but I do want to make a 260N
Can this flyback be converted to an ignition coil of a car or a motorcycle cuz if it can burn a paper maybe it can also burn a gasolin fuel in the combustion chamber of an engine .
does the Bedini circuit really work
Great videos awesome education, Have you tried to make a home made metal detector?
Please what the name of this tranceformer i need to know the pins
nate what is the output of the cfl circuit alone
i made a taser like the one you described in a different video, but instead of making lightning type arks, its making a high pitched squeaking and an ark just like this one. it can light things on fire, so im wondering why that might hapen.
How would you turn that into a musical plasma speaker. I mean could you inject an audio singnal in the cfl circut.
Sir why we not use cfl out put frequency to make smps
thank u thank u very much Nate.
Would this work with a 4 pin plasma ball flyback ?
Hello Nate . I donot got trimmer capacitor for making the FM transmitter. is there any alternative way to make. plzz help me
+Erick Eagle yes, you can make a trimmer capacitor, try getting 2 plastic cups and putting tinfoil halfway around each, attach wires and place one cup inside the other, as you turn the cup so that the tinfoil becomes more or less overlapping it will change the capacitance! You could also just use a set capacitance value and calculate the frequency it will broadcast at from the formula I showed! Hope this helped ! :D
I did the same but continuous resistance to the problem of how to solve the problem, how to solve the problem until after the arc is up to 1-2 seconds
Could you use a ballast from fluorescent tube light fixture
Is this generator capable of powering fusion reactor?
Pretty sweet, man!
Could you reconnect this to the tv and how long willl it last
Does it have to be a fly back transformer or can it be a step up transformer
If it was just a regular step up transformer:
A. You wouldnt even need the driver, just put in an AC current
B. If it was a high voltage transformer (such as that of ignition coils, microwave transformers, or neon sign transformers) then it should work. However, if your transformer is not one of these, than you should get nowhere near the output voltage of the one shown in the video.
kind of a stupid question - but is the output ac or dc?
Does this make high enough voltage to do arc fractal wood burning?
+ElectricAvian voltage yes, but since the current is small, it will likely make small fractals, so nothing like what a MOT will produce
does it work with voltage multiplier?
would love to know how to build a simple stereo amp that's clean sounding
and so I love Keystone Science
Excuse me sir!!! I wanna discuss you on a topic related to a flyback and cfl.
I wanna know about the CFL
how much watt CFL is required to operate A flyback.
I am in trouble. Please reply soon!!!
Awesome video man!!!
This makes my hands sweaty to watch.
Why is my spark so small? Nothing like what yours is. Thanks, James
Can you make an mini van de graf generator that u can touch
Why did you use a high voltage supply to make a high voltage supply, I don't get it, what happens if you just put 230v ac into the flyback primary?
Flyback primaries are simply not made for that kind of current. Not to mention flybacks like constant square waves, they just despise sine waves
sir I have tried everything but my transformer is just giving very little just negligible sparks
Sir how much voltage you give to flyback?