Van build Pt 6 | Alpine Van Works Hide and Go Seat Install
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- With a family of four planning to live out of a Sprinter van over the summer, we need modular seating that allows for space to hang out on those lazy days in the van. The HIde and go Seat from Alpine Van Works is the perfect modular seating option that flips up out of the way and takes about an hour to install. This video will help you get this seat installed and ready for the road in a matter of hours.
Shop All Sprinter Parts Here! - bit.ly/3Vg7no7
Check out our website for detailed information on all our builds!
www.nativenoma...
Products used -
Step bit - amzn.to/3hd4uVa
Krylon Rust Preventer - amzn.to/3T3YM5u
Silicone Sealant - amzn.to/3WwPWQv
Before you waste your time this seat cost $3000 on Alpine Van Works Sight
That's how much they cost.....
Only thing I don’t like about this is the cantilevered/unsupported side creating significant stress on the mount area. I would custom fabricate some sort of kickstand / vertical support that can be pivoted out of the way when stowed or completely removed simply. In a perfect world, it would be helpful to have a quick release to remove but leave the baseplate in position to completely remove out of your way when necessary to fit other loads.
Thanks for posting.
Thanks for the input!
Is it comfortable for long ride?
I can understand your concern. However, the cantilever design is and has successfully used in bridges for multiple vehicles and houses on cliffsides. My area's public transit system uses this type of cantilever- style seating in its buses. The only improvement to this installation would be to mount it to the vehicle chassis, as well as three- or five- point seatbelts, to bring it up to highway safety standards.
I have the same thing. So easy to install.
Likewise
are the seat comfortable?
Very good explanation
Thank you
looks like a great product. I am trying to figure out if the placement will interfere with the heated flooring system from just roaming design...the columbia flooring system. Any knowledge on this?
I'm not entirely sure on that. Sorry I couldn't be more helpful.
Bro come to Australia in Melbourne and $$$$ just install these seats in vans
LOLOL That's quite the trek!
Does the seat manufacturer (Freedman Seating Co) authorize attaching the steel mounting plate to a floating floor as you've done or must it be mounted directly to the steel floor of the van itself?
I would contact freedman seating co on that one.
Excellent question! The public transit where I live installs these seats directly to the chassis of the shuttle buses which allows the passengers to be kept in place even during a traffic accident.
Well that might solve our problem with a travel seat for the bus. How do you think it would handle two car seats? possible or no?
It really depends. Car seats are huge these days. My daughters takes up a ton of space. I’d be happy to sit two of them up there and snap a pic if need be.
That's one of the main issue's I've been trying to work around! They DO make some car seats that are made to be more narrow so they can fit 3 across the rear of most standard vehicle, so that's something to consider as well.
Thanks for the video - did you purchase the plates underneath the van or made them yourself? Can you share the thickness of the plate?
The come with the seat.
Thanks@@roamingwithjosh, do you also sell the plates without the seat?
IC think you forgot a washer though ,what's the torque setting on the nuts and bolts.
I didn't forget any washers. The manufacturer would know the torque specs.
is it DOT approved ?
I don’t seem to see a link to this seat and mounting kit! Can you send it?
The kit comes all in one with the seat!
Do you think it can fit in ford transit back side?
Thanks
Yea for sure.
Hey does the seat recline back at all????
It does not unfortunately
What size and grade bolts did you use on your install.
Thank you
Bolts come with the seat. I'm unsure of their exact size and grade.
Is it comfortable for a long ride?
Not for my 12 year old son. We have to break the days up to give him time to run and stretch.
Where I can buy one of these
Check out thevanmart.com
Where i can buy same this seat please ?
They're kinda hard to come by last I checked. I would connect with freedman seating company out of chicago.
Do you trust this with your kid’s lives? It has not been pull tested and therefore, its safety is unknown. When there is weight in the seat, it could twist out of shape, because only one side is attached. This seems like something you wouldn’t want to use in motion. Buy a safety tested seat for your family. JMG or Benchmark, make safety tested/pull tested seats.
Do you have any links. Im searching and not finding much for these companies
The 2 bottom brackets sit flush with the frame in different areas. There would be a weight limit, especially important if in a head-on crash, rare. An upgrade could be it clips in at the floor when folded down. As strong or stronger than standard seats, then.. usually standard seating just bolts into the frame.