Engine power reduce easy fix GMC acadia
ฝัง
- เผยแพร่เมื่อ 9 ก.ย. 2019
- Guys this work with my acadia for some time but when I change the purge valve wish is connected with the throttle !! is only 40 $ after that I had no problems with that again !!
Check the link !! 👌😀
• Purge valve GMC Acadia...
Save hundred of dollars by doing it your self !! Easy fix clean throttle and air that was it ! Fix ! Mechanic was gonna charge me alot of money to fix all I spend was 5 dollars ! If i can do it you can do it !!
SUBSCRIBE and like for more videos
Let's learn together!
Thank you
TH-cam is the best. I would have spent some 2 years in school learning some things and paying a lot of money. But thank God for TH-cam.
the dreaded "reduced power" messge - stabilitrack..etc. I replaced the intake manifold -- cleaned the you know what out of evertyhing -- did not fix my problem. I would still receive the dreaded "REDUCED ENGINE POWER". Primarily when my engine was warm and I would stop at a light or stop-sign. I checked for codes -- I had a code for the fuel rail sensor (if my memory is right, it was code P0190). Replaced the sensor. Fairly easy job, disconnecting wires and moving htem ouf ot the way, was the hardest part. Replacing the fuel pressure rail sensor fixed the issue... what a relief. There's a video out there to help. A thin walled socket for the bolt holding the sensor in place us a bonus.
I swear youtube is better then some mechanics.
A little late to tell you now, but you need to remove the oil fill cap before removing the plastic engine cover. Otherwise you will break the plastic engine cover.
I have been trying and trying to figure my wife Acadia out. It's been doing the exact same thing as yours. Thank you my friend for the help and tip. Muchly appreciate buddy.
I'm happy for you to save so much by doing it yourself. Keep up the good work my friend.
Thank you so much. I fixed my car same problem through your video ❤️❤️
Thanks man! Car is running a lot better.
Thanks for the video.. helped alot.. Gracias.. 🇧🇿 🇧🇿
Thank you bro, great video
Great Great video plus it had my smiling.
Good job it helped me out a lot
I just fix mine great job. Dealership are thieves
Lifesaver my guy
I did the same as well and I think it's working now to. Mine would act up about once a week then be ok for a bit then the hole car would shake around and would say engine power reduced to, so im thinking it was all the oil in the sound damper in the intake tube. Cleaned up with throttle cleaner.
Thanks for the 📹 video.
Hey man Thanks for this video
Thank you thank you thank you!!! 🙏🏼🙏🏼🙏🏼🙏🏼
El momento de verdad! Thanks for this video. Gotta go do this to my Traverse now.
I have a traverse with the same problem too
Si
Good job
great job
Buen video man
Ima try this on my 2014 gmc acadia
thank you
\
Thank you
Thank you! Thank you! Thank you!
Liquid in the air conduit? Oil blowby?
I have a 2011 gmc terrain, last night my engine stops completely and the message came on power engine reduced, can it be the same problem with throttle body, I parked the car and haven't try any thing because all shops are closed today
Did it throw any codes and did it have oil in the intake ?
Just an fyi the battery is located behind pass front seat in floor its a 10mm.....and if u disconnect for few seconds it will reset the power loss that comes up on driver dash screen.
Do you have to disconnect the battery first?
Once you see oil in the air conduct, you should change the two pcv valve too..
Whe is the pcv valve I was told mine doesn't have one 2014 3.6
I know where one is in the back but where is other one
@@eddykelemis8964the other is in the front up under the throttle body in front of engine I just cleaned mine out
@@keepprogressing4178 i have see where folks widened the two holes on pcv valve and put it back in and never had problem again can anyone confirm this ?
I knew of the front one didn't know a second one existed
sera que desconectastes la bateria por eso no prende la luz deja que la computadora de su siclo y me dices
So did the same problem return after a while?
Una pregunta estoy teniendo un problema con una Buick Enclave pierde fuerza cuando le acelero parece que ya lo está haciendo más seguido tu crees que limpiando esa parte se arregle gracias
Si, pero en esas se ensusian las valvulas tambien
@@gtamayo1 👍
Hazlo en español, oh traducido.
Mi GMC Acadia maraca el código P0101
Y cuando la dejo en parking o está parada como q se jalonea y la aguja de las revoluciones se pone inestable
Y en ocasiones se apaga.
Apenas la compré y me dicen q según en autopista a 60 oh 90 kilómetros pierde potencia q será ??
Oil is in the air intake flex tube Because the PVC valve is clogged.
How long did this fix last please?
😂 nice 👍
I cleaned it up on my daughter’s Acadia because I was working on spark plugs and since I had it off,, why not?
It se the same to me but it was the high pressure fuel pump crankshaft follower
I have a 2007 Acadia. It started to stutter and after two days I took it to Autozone to get a code reader. The code that came on said I have a misfire in my cylinder 6. I was told to change the spark plugs and check the coils. After inspecting the coils they were good but I still had the spark plugs changed. After this, we found that the PCV valve was clogged and the Breather tube broke. after a temp fix of the tube. we turned it on and then I got a code stating P0300. Well, I went ahead and order the breather tube and a new rear PCV valve. My car is still stuttering and my RPMs are still low. What can I do next? please help
Did you ever get that fixed ?? And how did you solve it???
Hey man just a quick question? I have an 2011 acadia, when you put it on drive it doesn't go above 3 mph, would this fix it?
I think that may be something different!!
Crazycamaroz28 I also have a 2011 Acadia slt 2WD It's a headache. I cleaned it like this and changed some camshaft and crankshaft position sensors and it fixed the problem.
Sounds like maybe a catalytic problem?
The map sensor will keep your vehicle running below 5 mph. If u unplug map sensor and it run above 5 mph replace it
I would check throttle position sensor first for that issue without knowing anything else of course.
Ese problema que te pasa el aceite ..para ayi..es la valvula de pcv.. necesitas replazarla para que no buelvas a tener ese problema
I will have to look at mine too.
Where did you buy the purge valve? Is it called something else like a vapor canister purge solenoid or vent solenoid?
John Artzberger it can be found on Amazon.
Emission Vapor Canister Purge Solenoid Valve 12690512 55593172 Fit for Buick Enclave Lacrosse Cadillac ATS CTS SRX XTS Chevrolet Chevy Camaro Equinox Impala GMC Acadia Terrain Saturn Outlook 3.0L 3.6L www.amazon.com/dp/B082V3MDWP/ref=cm_sw_r_sms_apa_i_0ed-EbW4B85P8
Amazon. They sell it the cheapest.
I have a GMC that does not want to go over 30 mph. When it's time to hit second gear, the RPMs go way up but no second gear! Culprit? The TPS.
Did this work???
i have 2010 acadia. its having hard time accelerating and sometimes have a humming noise while driving
I have the same car same problem
it is having more problems right now. when im stepping on break it feels like it is locking.
I found the problem I had a loose oil filter
realy? i hope it would be that easy on my acadia
Change the filter, clean the throttle body, change spark plugs with iridium only, and change the metal pcv valve that's hidden by a plastic hose in the back of the engine by the rear ignition coil. It's a challenge taking it off, so use vice grips to take it off. Before putting the new pcv valve on highly advise lubricate the lower part of the pcv valve so it can fit in a lot easier. Trust me, been there, done that on my 08 Outlook.
Se solucionó el problema ???... o luego te volvió aparecer...????
El problema que yo tengo es que se me apaga y aveses no quiere prender la empujo un poco y vuelve a prender , que puede ser . Parada no se apaga
Purge valve, check that
Alguien sabe por q mi GMC Acadia 2008 tiembla la luz de cheke engine se prende y se apaga y después q se calienta como en 5 minutos ya funciona bien
Amigou creo que uno de los coil que van con las bujias te está fallando
Why you break the engine cover like that?
Ikr.
Easier access to the throttle body to clean it
@@williamedwards7315that doesn’t answer the question
Freeeeeee tacoooosss amigos!
pcv recall oil in air intake
😊
Oil in intake is caused by clogged pcv easy and cheap fix
but which pvc??
Follow the black air hose on top of engine there 2 one for purge valve one that goes to back that’s your crankcase vent valve remove hose carefully turn small piece to side the pull that silver piece is your vent valve plier it out you will see 2 small hose clogged with oil
The purchase new one and drill the small holes a bit bigger before installing garrantee to work
Best of luck
If you don’t change the clogged pcv in rear you will continue the same problem
which one?
@@kenwall4526 There's one in the front and one in the back. They are both on the right side of the engine by the throttle body. Change both and do the cleaning like in this video and you are good to go.
En español x fabor
More video about that shit called gmc acadia i will spend my life learning how to fix it. because it is cost me a lot
It Look like he also change your pigtail too probably the connector as well check your map sensor that could be something that does reduce your engine power and your mass airflow sensor before you put in some serious money
muy rapido la traduccion en español
Tengo el mismo problema, mi pregunta es si despues de que lo limpiaste, te volvio a hacer lo mismo de power reduction?
Hola !! Si despues de un tiempo Volvo a hacer lo Mismo ! Lo que hice después le calmbie el purge valve th-cam.com/video/48Aa_49gYjw/w-d-xo.html
Me costó solo 40$ muy fácil de poner te dejo el video !😀👌
después de hezo ya no tuve ese problema! Saludos
@@handsonjobf9200 Hoy limpie el trottle body y por suerte salio bien, lo del purge valve lo cambie hace 6 meses porque cada vez que cargaba gasolina tenia problemas para arrancar, asi que no creo q en mi caso sea eso, si me vuelve a fallar lo del trottle voy a tener que llevarlo al mecanico a que lo cambie y lo programe, gracias x tu respuesta.
Un gusto !! 😊
@@argentino901 le fallo despues de la limpiada? A mi me paso lo mismo hoy me dijeron que era una fuga de air
@@juancastillo4563 Juan, yo termine cambiando el trottle body porque me seguia el problema, hay videos que te dicen como relearn la computadora, porque cuando cambias esa parte las revoluciones van a ser altas (en mi caso no tuve problemas y las RPM eran normales) despues que cambie eso,no tuve mas problemas con el reduce engine power. lo unico que yo hice fue desconectar la bateria para cambiar el trottle body.
Buy one of those cheap check engine scanners and whenever it acts up just clear the codes and the truck will run fine
En españoñ
Theres another parts that it has to do with the same problem
stop clean the-- map scener --------- now
MAF
Every freaking two weeks there’s something wrong with this piece of crap! I can go back and unbuy this crap. I’m so mad.
I hear you. I still have another year and a half of being stuck under my Acadia.
My bf did this and the message is still coming up for some reason
Replace the throttle body position sensor, that will fix your problem
He didn’t do it right then.
I see the problem and why your cleaning every other week is because your missing the insulting foam tube that goes on the breather tube, fixs that and you won't have that issue anymore..
Foam tube?
warranty after one year lol
That’s doesn’t proves anything yo need to drive it over miles b4 you talk so quickly
GMC Acadia is the worst car ever.
En español x faboŕ