I'm subscribing just for the battery jump start tip. I have a drill that has a non registering battery and was trying to figure out what to do. Now I know. Thanks man
I have 3 press tools a Milwaukee, a Ridgid, and the big Vevor press the reason I bought the vevor is I had the Ridgid snap cutter for cutting cast iron and it is so fast I snap cut a whole house with 3 bathrooms in 27 minutes it took us a hour and a half to get it out from underneath the house, so far the Vevor press has been well used and works great so far I’ve had it about four years now with no problems.
What is your opinion on this smaller battery unit handling 1" jaw set being used for manifold piping on combi boiler installs , where your crimping a larger quantity of joints.
Unfortunately this unit will only do up to 3/4 however I’ve had to knock down about 30 crimps in a row before working on frozen water lines and it definitely does its job without complaining!
I'm subscribing just for the battery jump start tip. I have a drill that has a non registering battery and was trying to figure out what to do. Now I know. Thanks man
You’re welcome! Yeah that is a life saver I’ve had to do that a few times!
Great video. I have been looking around at Ridgid for this but never found this one. All the others I found was almost double the price. Thanks!!!
Yeah this little guy is excellent! It only will do 1/2 and 3/4 but for me it’s just right and I’ll break out the torch for 1 inch and above!
when you get done pressing take your marker and put X on every press joint
And why would you do that? Just to make sure you don’t miss one?
I have 3 press tools a Milwaukee, a Ridgid, and the big Vevor press the reason I bought the vevor is I had the Ridgid snap cutter for cutting cast iron and it is so fast I snap cut a whole house with 3 bathrooms in 27 minutes it took us a hour and a half to get it out from underneath the house, so far the Vevor press has been well used and works great so far I’ve had it about four years now with no problems.
That’s great to hear! What is the max size it will do? Part of me wants to get one.
@ I’m thinking mine has copper press jaws up to two inches
4:42 cut video ❤
Does this do refrigerant piping?
I don’t believe so, although I don’t know what size it comes in that’s kinda out of my wheel house.
What is your opinion on this smaller battery unit handling 1" jaw set being used for manifold piping on combi boiler installs , where your crimping a larger quantity of joints.
Unfortunately this unit will only do up to 3/4 however I’ve had to knock down about 30 crimps in a row before working on frozen water lines and it definitely does its job without complaining!
@TheHandyJeff I see they have a kit that covers up to 1" with the smaller battery. That was why I sought opinion on that.
Rip it all out and put in PEX 😎
Oh you can just sweat the copper! ❤
😂 I knew someone would say it.
Still has lead in the solder pro press doesn’t have lead and is safe for human consumption 😊😊😊😊just say no to solder