The stock tyres are 5,75 inch in diameter(almost 14,5 cm), whilst these are 4,29 inch(almost 11 cm). So they are smaller, and with the same rpm this leads to a decrease in potential distance travelled by the wheels(this follows from the maths formula for circumference of a round object: 2*pi*r) in the same amount of time, and therefore, with these new tyres, it's slower.
I recorded the audio from 2:11 to 2:13, cleaned it up, and ran it through my Doppler program. It yielded 113kph or 70mph. That is really Moving! Great job!
Thats pretty nice. When I drive my revo on 6s it is also very hard to control, but the small tires make it even harder... ^^ One thing you could do against the wheelys is to build a custom spoiler for the front of the car. It would help to get more traction on the street... Maybe I'll build one in the next few months... ^^
Does putting a front splitter on an rc car help it aerodynamic wise? I threw this motor on my rustler, geared it up and now when it hits around 80-90mph it's wheelies up and I have to let off. Thanks.
dtmpowerboss I was gonna say, that beast is hitting 60 with no problem, and STILL pulling wheelies, lol. I want one, gonna have to wait a bit, but I'll have one eventually, for now I'll keep fixing my ECX Torment 4wd, lol.
I think that aerodynamics has a problem. It is necessary to get the downforce of the front desk with a front spoiler. And the angle of the rear wing is bad. I make a flat a little more, and only the minimum downforce is enough, and is there not it?
Dude nice truck, mad power. have you thought of putting a front wing or spoiler to the front to help keep that beast down because that rear wing is just pushing the back down bringing up the front? just a thought dude.
hi mate what motor is that traxxas e-revo using i mit put on on my vrx-e1 1/8 scale what is the motor called and these the motor and the esc come in a combo
well if you have stock erevo you need rpm truth track a arms for the rear and rpm for the front also you will need cvd shaft and tires are from xo1 but if you wont run hi hi speeds i would get proline onroad tires
I reakon with the wing adjusted down abit.. It would run better, gets up to speed and it's too much rear down force with nothing keeping the front down. And drop the suspension heaps too. Maximum low.
Having been in the position with my car waiting to be a airplane. I used a Heavy Duty measuring tape and clipped it on the front bumper. - Fixed my airborne problems
Great Revo!! To run that kind of power did you have to up grade the drive system/diffs? I'm thinking of going Mamba monster for my summit. Just would like to know how the system is if it tears gears like a fat kid at mcdonalds
cool video I got mine similar but I'm running the tekin rx8 gen 2 and the 2250kv sensored motor using pro line road rage tires [ STRAPPED ] and rear wheely bar but too the 1oz stick on wheels weights for semi tires got 3oz ea side in front places evenly next to servos and stiff sway bars purple Springs front and rear 80wt oil still tries to wheely but it's fast as heck and handles so much better now at high speeds lol try it
i know but like i said stock tires can only go 60 with this tires i had over 70mph so its faster well with some gearing i did thats why i mean tires can hold speed stock can only blow up
the best is probably hpi savage Flux since u will have to dump a lot of money in erevo since all drive shafts is plastic and weak arms and difs Flux is like vorza unbrakeble it only needs few upgrades but makes best basher
actually i am getting sick from xo-1 wheels, once i though slick tires have lots of grip but those tires looks like drift tires that can hold 100mph+ even when running my xo-1 i can't reach more than 60mph without loosing control on the track
Impressionnant une telle rapidité ! Seb
nice! I'm runnin a Castle Creations 750kv motor, custom 45 tooth pinion, 54 tooth spur, 8s lipo on my Emaxx. The XO-1 tires are the way to go!
Just as always e-revo stands up in the rc world to take the top place
The stock tyres are 5,75 inch in diameter(almost 14,5 cm), whilst these are 4,29 inch(almost 11 cm). So they are smaller, and with the same rpm this leads to a decrease in potential distance travelled by the wheels(this follows from the maths formula for circumference of a round object: 2*pi*r) in the same amount of time, and therefore, with these new tyres, it's slower.
I recorded the audio from 2:11 to 2:13, cleaned it up, and ran it through my Doppler program. It yielded 113kph or 70mph. That is really Moving! Great job!
o wow nice nice
how about my buggy video it was much faster
What's the title of the video?
RonALampman 6s 25 volts losi 8ight 2.0 70mph brushless blown rotor/motor
wow..your car fly away man..!! to much power..on light body..so fast..
your pinion gear isn't meshed with your spur gear, and what is with the loose screw on the brace? just in case you didn't notice.
Thats pretty nice. When I drive my revo on 6s it is also very hard to control, but the small tires make it even harder... ^^ One thing you could do against the wheelys is to build a custom spoiler for the front of the car. It would help to get more traction on the street... Maybe I'll build one in the next few months... ^^
@dtmpowerboss did you have issues with heat running them gears? After watching again I noticed the pinion gear isn't even set! Can you explain
put a wing on the front of it to give it down force haha
David T good idea
remove the rear wing...
Nathan T. No it flips over hard
thats crazy!!!cool video bud!!
motox766 thanks
sounds like music you hear at a funeral. frigging depressing!!!! oh love the car!!!!
ha maybe but it's not bad music like rock or rap
+dtmpowerboss to each his own bro.
damn that thing is flying.
amazing set up, looks great bro.
What are the wheels and tires you are using? I keep blowing out my stock wheels and tires at sustained runs above 45 MPH.
Look like you need a custom long wheelie bar to get the most of the car. Great speed runs BTW.
Wow. That's awesome man.
Great car! What do I need to leave my e-revo so? What parts should I change? Thanks for answering
Beautiful car and beautiful place :)
wow that is pretty fast 66mph is nice!
Yep
Does putting a front splitter on an rc car help it aerodynamic wise? I threw this motor on my rustler, geared it up and now when it hits around 80-90mph it's wheelies up and I have to let off. Thanks.
Yep
So should I get an Erevo or Summit? I love to go fast but I love ofroad (I live in an orchard nd im surrounded by canyons and offroad hills.
Awesome, wish my hand/eye coordination was better. I miss rc racing.
Where have you find the pinion and spurgear in metal?
What is the name of batteries used
and how much the highest speed reached by the car
I hope the answer :)
Name dont remember
Speed around or above 70mph
Name dont remember
Speed around or above 70mph
dtmpowerboss I was gonna say, that beast is hitting 60 with no problem, and STILL pulling wheelies, lol. I want one, gonna have to wait a bit, but I'll have one eventually, for now I'll keep fixing my ECX Torment 4wd, lol.
hi
is the same engine as the x01?
then wanted to know if it is able to reach the 100mph ?
thanks
have you tried a body without a spoiler so you dont get so much down force on the backend?
Did u have to do any mods to get the wheels to fit. And what's the handling like.
0:27 what are those turnbuckle things mounted above the shocks for?
those are sway bars for handling
thats incredible. are there any problems with heat running on 6s?
Dude, what motor mount will u use with XO1s Pinion?
Thanks.
I think that aerodynamics has a problem.
It is necessary to get the downforce of the front desk with a front spoiler.
And the angle of the rear wing is bad.
I make a flat a little more, and only the minimum downforce is enough, and is there not it?
I agree. Maybe canards set into the front and even a wing.
that was pretty cool
you need some lead weights on the bumpers my friend! That car is a beast.
Nice run bro!!
That cars doing a good 70mph man.
Nice speed... did you change dif. Gear.. oil?
Would you prefer this or the Savage HP?
What spur is 35 that works on e revo only one in book ive seen is 53 tooth please tell ?
Just wasn't sure what you meant. The only reason I as I'm thinking about trying this lol. Could I run this gearing with the hpi phatlines?
Dude nice truck, mad power. have you thought of putting a front wing or spoiler to the front to help keep that beast down because that rear wing is just pushing the back down bringing up the front? just a thought dude.
E Revo ist the best Rc car for me,its very Durable i want it too.
I have a revo 1/16 stock brushless wanting to upgrade it but I don't no What to upgrade it needs to be fast and really strong
Love the epic music.
where did you find that 35 tooth spur gear and is it .08 and 32p?
is that the vxl one are the regular one 8th scale
could I upgrade the summit? Not looking for 65+ or crazy speed.
Sick vid
How did you get that gearing to fit? did you mod the transmission or did you buy it straight and they fit?
No it fits perfect
Where do you get them?
***** revo spur and xo1 pinion
Thank you
hi mate what motor is that traxxas e-revo using i mit put on on my vrx-e1 1/8 scale what is the motor called and these the motor and the esc come in a combo
The XO-1 motor is the Castle Creations 1717 Big-Block motor.
well if you have stock erevo you need rpm truth track a arms for the rear and rpm for the front also you will need cvd shaft and tires are from xo1 but if you wont run hi hi speeds i would get proline onroad tires
Lead tape under the front of the chassis....makes you crash harder , but handling improves 10x
Hey exactly what spur gear did you use for this, I want ot do this to my mini e revo and Im ordering the parts for it
OK. Thank You!!!
you should get a front wing or splitter to help with the front lifting. It'll slow it down yes but the downforce will give you alot of control
complimenti
Any opinions on a good motor/esc combo for my stampede 4x4 vxl. Looking for at least 1/8th scale and can handle 6s.
Castle mmp with 2400kv 4s rated don't do 6s to heavy and not fun
Maybe some aero work is in order? I'm thinking maybe Indy or F1 style aero on the front? Maybe top fuel dragster style? I'm just spit-balling.
Good idea
Nice...what are your temps like??
Are those tyers good for grip?
Not really they lose traction fast when to much power
You basically made it slower by adding those wheels and tyres. Did the stockers break or something?
that is super fast
sounds goood
yeah more like a 80 mph car! bad ass!
Cool video
RC Hampton yep
Is this tuned up ? Or just tyers & 6s.. Wot battery u using full description please
phatboi1988ful well also big pinion gear and small spur and other tune staff
dtmpowerboss so it's not this fast with just the 6s lipo n tryers in too minds to get this or baja.. wot 6s lipo u using ?
phatboi1988ful it's fast with 6s but stock gearing is slow I mean only to 55mph to make it go this fast it has to be like 25t pinion and like 40 spur
die MMM2 combo hab ich auch in mein Emaxx ;)
I reakon with the wing adjusted down abit.. It would run better, gets up to speed and it's too much rear down force with nothing keeping the front down. And drop the suspension heaps too. Maximum low.
he might change to smaller wheels/tires but he geared it to the moon with Mod1 gear hahaha...
50 feet long wheelie bar is what you need!
i know this sounds weird but if you put a wing on the front of the body it will solve your wheelie problems at high speed
Having been in the position with my car waiting to be a airplane. I used a Heavy Duty measuring tape and clipped it on the front bumper. - Fixed my airborne problems
Does more air get under the body now?
When wheeling
do those tires grip good?
you should make a front spoiler 4 control
+Yannick Maes (weeweeweedee) good idea
+dtmpowerboss google need for speed time attack and you will see what i mean
+YKMS I concur.
where is the GPS readout?
Do you have a wheelie bar for that Erevo?
I don't remember if I had one that time but with wheelie bar it will flip over
the rear wing will also cause front to lift
Cool car😎
if it goes that fast with small wheels then how fast does it go with big wheels?????
Big wheels will cause ballooning and they will have to regear to accommodate the decrease in torque.
Great Revo!! To run that kind of power did you have to up grade the drive system/diffs? I'm thinking of going Mamba monster for my summit. Just would like to know how the system is if it tears gears like a fat kid at mcdonalds
Rdy to take off!.....o.O no wings >.
dayum!
is this a mamba monster 2650kv motor from castle creation?
2200kv
whats better 2650kv or 2000kv?
2200 in my opinion, more torque, it can handle 6s, but there both badass
i thin both have 60000rpm or?
think
Crazy
cool video I got mine similar but I'm running the tekin rx8 gen 2 and the 2250kv sensored motor using pro line road rage tires [ STRAPPED ] and rear wheely bar but too the 1oz stick on wheels weights for semi tires got 3oz ea side in front places evenly next to servos and stiff sway bars purple Springs front and rear 80wt oil still tries to wheely but it's fast as heck and handles so much better now at high speeds lol try it
tekin is like same thing
+dtmpowerboss very true but with the sensored tekin I can change tires and gearing and crawl with it too try that with a mamba
+gmyer71 true
Good~~
thanks man
Do the Torres get grip
would u have this over the hpi vorza
depends what u doing if bashing and playing around erevo much better but vorza much stronger
I have both. the Vorza is a little more fun.
treeroofgrass all depends where dunes erevo track and on road vorza
how would you make it slower?
50wt oil springs and stiff pre-lode take the wing off and put lead in the front
Need a front diffuser, a big one..
you should put wheelie bar on that so it doesn't tear the thing up
How can i speed up my
e revo 1/16 veleon motor.
i know but like i said stock tires can only go 60 with this tires i had over 70mph so its faster well with some gearing i did thats why i mean tires can hold speed stock can only blow up
e-revo's are not currently to use for wheeling
maybe buy they wheelie good
+dtmpowerboss yes
+James Eslick yea
I am gonna be bashing and going through water and hitting high speeds and going on stones and dirt ?
the best is probably hpi savage Flux since u will have to dump a lot of money in erevo since all drive shafts is plastic and weak arms and difs
Flux is like vorza unbrakeble it only needs few upgrades but makes best basher
Nice
actually i am getting sick from xo-1 wheels, once i though slick tires have lots of grip but those tires looks like drift tires that can hold 100mph+ even when running my xo-1 i can't reach more than 60mph without loosing control on the track