Using GPS with PPS to synchronize clocks over the network
ฝัง
- เผยแพร่เมื่อ 28 ต.ค. 2022
- Hi everyone,
In this video I'show you how to use a raspberry pi 3 and a serial GPS module with PPS signal to get very accurate time and synchronize clocks over your network.
I'll use Raspbian OS for the server and Ubuntu 22.04 LTS for the client using NTP over the network.
You can find the GPS module and the GPS antenna on links below:
#GPS MODULE uBlox NEO 8M
www.aliexpress.com/item/32955...
#GPS Ceramic Patch Active antenna with 3m cable and SMA plug
www.aliexpress.com/item/40010...
I hope you enjoy the video. Please comment below for any questions, ideas, etc. I truly appreciate it!
Thanks.
Best regards,
RSM - วิทยาศาสตร์และเทคโนโลยี
Followed this tutorial to use as a Stratum 1 PPS Time Server for OPNsense. Worked flawlessly with your precise guidance, thank you.
Hi,
Thanks a lot for your feedback.
Regards.
Thank you very much for the tutorial.
But if I understand correctly the output on 14:11, this server still uses NTP to set the "rough" time and then uses PPS to make it more precise. I think it would be even better to use GPS time (NMEA) as the source of the "rough" time which will make it completely autonomous and independent from the internet.
Excellent video!
Would love to see this shown not jsut with an NTP server but also PTP as the pi also supports that with the brodcom nic it has.
Thanks Sir
Hi, You are connecting ping 1 of Raspberry Pi for GPS 8M Module. but in video you told us to connect pin no 2. Can you please clarify.
The time delay was more than 500 nanoseconds. Right ?