I own a 2019 TMracing EN 144 and a 2021 TMracing EN 300, both 2 T's with carbs, large fuel cells and GPR stabilizers. Your comment about the "spot weld issue" on the swing arm is misguided. With the rear tire/wheel off remove the rear brake caliper from the swing arm and you will notice the rear caliper support is not only welded to the inside of the swing arm it runs all the way through the swing arm and is welded/secured on the outside too. I can assure you there are no random welds on these machines. I got my first taste of TMracing motorcycles in action during the ISDE at the John Zink Ranch in 1994. They were adorned in their pink and white plastic and created the sweetest most crisp 2 stroke symphony I have ever heard. I swore that day I would own one and in 2019 I finally did it. I ride my bikes and outside normal and responsible maintenance have not had a single failure. They were made to be ridden and raced.
TM's are the most underrated bikes ever outside Italy, unfortunately. TM factory takes the best of every parts made for enduro motorcycles and combine them on the same bike. Parts are a little difficult and expensive to get even in europe, but are awesome, and the attention to details is amazing. They think about every inch of the motorcycle. They sell motorcycles because they love them. They dont sell motorcycles just to profit, like other orange brands. From Portugal 😎😎😎
They use to be loaded with all the best ohlins suspension along with lots more but the performance was average amongst other 2 strokes .. getting parts was always difficult .. I’d stick with a KTM
Do we need to call the whaaaabulance since you’re obviously butt hurt about orange bikes for some reason? 😂 Haven’t watched much if you haven’t seen green, blue, and red bikes.
Kyle is a great reviewer on all brands! He is honest and tells you the good the bad and the ugly on any brand that he tests! Not to mention he gives the bikes away after the review!
I'm Italian, here TM is one of the best Sellers in 125cc enduro class, unfortunately the 300 are a bit too nervous for technical riding, but man they are perfect for cross country stuff! Simply stunning bikes! Made for pros
TM’s are incredibly built and underrated motorcycles. Everything on the bike is made by TM, or parts sourced from Italy only! Incredible attention to details and beautiful bikes.
The reason why it has tons of street accesories is because over here cops won't let you just ride an offroad bike without a plate unless it's a private area, especially if you ride your bike from home to the trails, cheers from italy!
Please do as much content as possible with this bike! 👌👌👌👌 I’ve been waiting for someone with your quality of content creation to get a TM and go in-depth! Thank you legend! No where near enough in-depth content out there on TM so please do as many narrated rides , back to back test and reviews as possible! Im actually trying to decide between Beta, Sherco and Tm as the moment and it’s so hard to choose!
In depth? He hasn't gone in depth on a bike review in years. Think about it, he has 3-5 bikes at a time, keeps them for a few months and raffles them off. He says himself he only rides 1-2 times a month so how many hours can he realistically get on each bike? Try looking up guys who put hours on these bikes DTR - Down To Ride has a few videos on the TM check him out.
Bought one in October, absolutely love it, coming from a 15husky te and an 01exc ktm prior. Stock tyres are rubbish, only got 15hrs on mine and going in the bin! The irc ve-33/ve-35 are great, trying motoz extreme hybrid's thus time as are dot rated and my tm is regoed. The powervalve does play up from time to time but that's negligible. Gearbox overheats during breakin change oil after ever ride till its run in. Side stand it fixable by running a low profile bolt so that the spring bracket doesn't catch on it. Power isn't quite as smooth as or tractable as my husky. Can't fit a 14 tooth front sprocket. Very limited rear sprocket options. Stock gearing is too low for rd, too high for tight single tracks offroad. Stickers won't last. Need to unbolt seat to add oil. Long range tank (factory option and a must have) makes tank shouds not line up properly. Suspension is really good (not WP rubbish, I remember when WP used to be good 😔) Seat us comfy. Clutch is like a brass button drag clutch an you can't really slip it (there's a mod to fix it) Feel free to ask me anything and ill do my best to help 👍
@@tassiejeeper01 nice articulation of your experience! I have a 2021 TM 250 and concur with most of your citations. Mine has oil injection tank in the frame, so not necessary to remove seat for oil, and I’ve had no issues with the clutch engagement. Mine is very linear. Not very light, but works well. It’s also very fast, not near as mellow as the Austrian machines. I liked mine enough to order a ‘23 limited edition.
A lot of ppl think they sound bad at idle lol but they don’t know is their porting is fantastic! That’s how all the factory 2 strokes sounded back in the day lol
The kickstand is required to do that on street legal bikes at least in some European countries. It’s either that or a sensor that knows when the kickstand is down. It will turn the engine off if you put the bike into gear while the kickstand is down. Both accomplish the same thing, preventing you from riding with the kickstand down. The solution with the spring is cheaper and lighter so its seen in alot if not all the enduro bike sold here Greetings from Switzerland
TM Racing also make engines for karts, I think this at least increases their production numbers for the engines. I too wonder how they do it, as they are reasonably priced. It's great that a small company can also run alongside the big boys.
The most awesome bike on the Planet!!! Yes it is, we have 2 of them 2010 TM Enduro 250 & 2012 TM 300 MX I used to also have a 2007 TM 250F awesome bike, and my son had a 2007 TM 85MX, cannot say enough good things about them! I used to work for the TM Racing Importer out of Marietta Georgia, my job was to set up dealerships, and I set up 22 across the US, it was unfortunate that the importer didn't do a good job.....The main issue that people have with TM is the fact that just about every importer has great intentions, but somewhere along the way, things happen either in their lives personally or financially, not to mention importers have to deal with the Exchange rate of the Euro, and that has been the only downfall to TM here in the USA, is the Importers, not being able to stay consistent! It seems like Ralph Schmidt and Dave from Get Dirty out of California are doing a fantastic job bringing these bikes into the country. Also just to note every bike has its quirks, nothing is perfect to each rider, but TM Racing is about as close as you can get to that perfection! Cannot wait to hear more about this amazing machine.
I have a 300 ENT TM Enduro 3:00 on it then raced trail riding still runs to this day has a license plate on it one of the best bikes I ever had get down it's the s***finally you have a real bike in there
I remember the very first TM that I ever saw. A 200cc brought in to a dealer in Burlington, Washington, from Canada back in the late 1990s. It was probably the prettiest dirt bike I ever saw to this day.
Yes! I'm so stoked for your reaction on the TM bikes. I personally own 2 (1999 250 & 2013 300 2T). I hope you fall in love with the build quality and the charm these bikes have like I did. Cant wait for the next video!
Rear mudguard wears the swingarm--> needs protection, shock has 50mm showa piston with 18mm shaft and the seal head is tm own. Make sure to change the fork oil after some break in rides. Some people use bigger and better batteries than stock.
A friend of mine has a carbureted TM racing 300... The only problem he has had is helping me clean all the roost off my goggles and front of my Gas Gas 350
That's so sweet u got one I didn't see this happening. I always liked TM racing bikes. I love the look of those TMs. Need to see more of them in the gps
My buddy happens to own this same bike. It absolutely shreds and you’re likely to never see one with you at the track. We turned his into a supermoto in the fall. It’s a wheelie monster. 🚀
@@MichaelLee-vk9fy a dead spot when accelerating and can some die out completely. No certain temperature in relation. Had new top end, tps and map sensor replaced along with a reflash of ecu. Definitely no the most reliable. Only starts if the stars align just right.
@@2stroke-nut we’ve already had some issues lol. actually left me stranded one night when I borrowed it for a week. I just look at it like a Ferrari, part of the fun is the maintenance 😂
I like the idea of buying a frame/engine block and having it customized - similar to the way many boutique mountain bike manufacturers offer their products.
Finally a TM! I have the same bike and I have only ever heard it called a TM (brand obviously) EN300 (model). I understand what those other letters are but never heard anyone use them. I love mine and since you have ridden everything I'm eager to see what you think of it. Before buying mine I did a bunch of research and never heard anyone say anything bad about them. Let's see how this goes.
On the kickstand. Take a close look at the bracket where the spring attaches. There may be another mount point for the spring that will serve to keep the stand down as per normal. Some trials brands have implemented this flip flop design to allow for user preference.
Absolutely gorgeous! Just bought a new 2023 Beta 300RR. Thought that was somewhat exclusive. But no! Looking forward to a ride review! Dude! Nice looking custom bike stand. You make that?
It's kind of a hybrid of fine Italian craftsmanship and a joke at the same time where the base gasket used to be.,. You have orange RTV sealant. Fancy! Custom and handmade 😉
Nice bike, I have the 125, for the kick stand You Just pull up the clip( the clip attached to the return spring) on the nut that holds the kickstand and It Will remain still
I have the same bike and I absolutely love it, do yourself a favour and disconnect the red wire with the bullet terminal within the wiring harness that follows down the headstock, After the time you have spent on KTM's I'd be interested on your opinions after spending a few rides on the en300, me? I found it far superior in almost every way, a few small glitches encountered but less issue than I have had with literally every other brand, wouldn't trade my 22 en300fi for the world
Kickstand like that is actually required here in Europe. The alterative would be a off switch that kills the engine if the stand is down but that is another failure point so many bikes don't have that!
I saw one at a dealer last year and loved it. The bike exhibited quality just sitting there. Almost replaced the KTM I was getting new at the time. Like the looks of the headlight. Has VForce reeds and KYB 👍 No stupid TPI but has TBI. I would leave the horn on to get your riding budy's attention when you need to.
I had a 1999 TM 300 enduro 24 years ago already, It was a great bike and I road the stuffing out of it. Had a bit of bar vibration so arm and hand fatigue was an issue but it was a great handling bike on Idaho single track. It was a handmade work of machining art. Getting parts then...
@Kyle - Thank you for the review and very much looking forward to your impressions going forward. Just a couple of comments for your general information - The welding dot is not a fluke, it is intentional and is something they do to all of their bikes, maybe to mark their uniqueness? The exhaust and pipe are are made by Netherland based HGS. Again, thank you for all of the quality content.
Looks good. Being over 50 I’ve been looking for a 300 2t for a while. Would mind trying this bike. Too bad there are not many dealers up here in Canada that carry this bike.
Hi, im an Italian "Endurista" (means enduro rider), and i'll explaing all the lecters EN=ENDURO, Fi=FUEL INJECTION, 2T(2 Tempi in Italian)=2 Stroke , anyway i follow you since a lot hoping to receive a very detailed review after you're going to use it really hard to test it properly. See you💙
KTM and Husq still do that with kickstands. They are like that on the showroom floor and then the bikes come with a replacement bolt that allows detent to stay down
Bump for this! I remember being a young kid at a dealership that carried KTM and about had a heart attack when I went to stand the bike up straight to get a feel for the weight of it and the kickstand flew up lol.
I have not seen or ridden a tm before and I can't wait to see you put it through it's paces, but I think I would like to ride it in road and in the dirt.
Good luck with the fuel injection. It's been quite problematic for some riders in various ways. Similar to TPI in KTM models, quite a few riders wish they'd bought the carb model instead which has better low down power (and less problems).
Only problem they have had is power valve rest more common on the fi. They are tbi(before ktm was also tpi before ktm). Have seen next to 0 issues with the injection system it self vs beta oil injection issues and ktm tpi issues.
Parts are not a problem. Get Dirty Dirt Bikes, affiliated with the importer. All TMs go through his shop. He has everything you need for the bike. I didn’t like the AXP skid plate and had SXS make one for me instead. Support is out there, and it’s a solid machine that doesn’t need much.
Franks Motorbikes in Bellevue WA has 5 of them as well as Riemann 300’s. They are the biggest Beta, TM and Rieju dealer. Frank is great and will ship. Check him out he is the Beta and TM guy
Looks like a wheel sensor at rear caliper- por que? Different kickstand bolt to defeat auto retract and you're all set. Another comment noted disconnect of a wire in loom, wonder what that buys you. Looking fwd to ride review!
I own a 2019 TMracing EN 144 and a 2021 TMracing EN 300, both 2 T's with carbs, large fuel cells and GPR stabilizers. Your comment about the "spot weld issue" on the swing arm is misguided. With the rear tire/wheel off remove the rear brake caliper from the swing arm and you will notice the rear caliper support is not only welded to the inside of the swing arm it runs all the way through the swing arm and is welded/secured on the outside too. I can assure you there are no random welds on these machines. I got my first taste of TMracing motorcycles in action during the ISDE at the John Zink Ranch in 1994. They were adorned in their pink and white plastic and created the sweetest most crisp 2 stroke symphony I have ever heard. I swore that day I would own one and in 2019 I finally did it. I ride my bikes and outside normal and responsible maintenance have not had a single failure. They were made to be ridden and raced.
TM's are the most underrated bikes ever outside Italy, unfortunately.
TM factory takes the best of every parts made for enduro motorcycles and combine them on the same bike.
Parts are a little difficult and expensive to get even in europe, but are awesome, and the attention to details is amazing. They think about every inch of the motorcycle.
They sell motorcycles because they love them.
They dont sell motorcycles just to profit, like other orange brands.
From Portugal 😎😎😎
Know what Iam quite sure those at TM wants dinner just as much as those at KTM.
Think they both go to work to be able to earn some money :-)
@@sund5 Still a difference between a greedy capital fund and a real company
They use to be loaded with all the best ohlins suspension along with lots more but the performance was average amongst other 2 strokes .. getting parts was always difficult
.. I’d stick with a KTM
Great until you require any parts from Italy.. we all had Tm as mate was riding for Tm uk. Resale value is far less than KTM brands
They need to start thinking about the powervalve reset issue that's been ongoing for YEARS now. Love the bike but that's pretty sad...
Finally a bike that's not orange 🙌
You missed the YZ450FX video from last week :)
Bro if you watched the top 10 bikes there were only 3 ktms if i remember correctly
Tu comprends pas grand choses toi lol
Do we need to call the whaaaabulance since you’re obviously butt hurt about orange bikes for some reason? 😂 Haven’t watched much if you haven’t seen green, blue, and red bikes.
Kyle is a great reviewer on all brands! He is honest and tells you the good the bad and the ugly on any brand that he tests! Not to mention he gives the bikes away after the review!
I'm Italian, here TM is one of the best Sellers in 125cc enduro class, unfortunately the 300 are a bit too nervous for technical riding, but man they are perfect for cross country stuff! Simply stunning bikes! Made for pros
wdym nervous
I have a 19' TM 300 that handles technical riding/deep & heavy mountain terrain/slow or fast af...with zero issues. It's a beast of a bike!
@@kevvy532 That the TM is nervous to ride, Duh..
TM’s are incredibly built and underrated motorcycles. Everything on the bike is made by TM, or parts sourced from Italy only! Incredible attention to details and beautiful bikes.
I've never heard of them being underrated.
Yep, that Nissin brake is surely Italian.
All the other brands do everything better .. including price
Buying these things is one thing, selling them used is a whole nuther thing.
Unicorn is one way to look at it.
HAHA! luckily I won't have to sell it. Just giving it away to you guys!
Those welds on the frame are utterly pristine from what I can see on the video
Hand welded as I'm told, mine looks perfect too. That one spot on the swingarm though, not sure what that is.
Ok they have the best welds and all the others don’t but all the others are cheaper to purchase and have proper parts backup everywhere you go
The reason why it has tons of street accesories is because over here cops won't let you just ride an offroad bike without a plate unless it's a private area, especially if you ride your bike from home to the trails, cheers from italy!
The sopt weld on the swingarm is actually for a structural bar the runs true the leg
Kick start + Electric is great. The pipe looks dope too.
Please do as much content as possible with this bike! 👌👌👌👌 I’ve been waiting for someone with your quality of content creation to get a TM and go in-depth! Thank you legend!
No where near enough in-depth content out there on TM so please do as many narrated rides , back to back test and reviews as possible!
Im actually trying to decide between Beta, Sherco and Tm as the moment and it’s so hard to choose!
In depth? He hasn't gone in depth on a bike review in years. Think about it, he has 3-5 bikes at a time, keeps them for a few months and raffles them off. He says himself he only rides 1-2 times a month so how many hours can he realistically get on each bike? Try looking up guys who put hours on these bikes DTR - Down To Ride has a few videos on the TM check him out.
Bought one in October, absolutely love it, coming from a 15husky te and an 01exc ktm prior.
Stock tyres are rubbish, only got 15hrs on mine and going in the bin!
The irc ve-33/ve-35 are great, trying motoz extreme hybrid's thus time as are dot rated and my tm is regoed.
The powervalve does play up from time to time but that's negligible.
Gearbox overheats during breakin change oil after ever ride till its run in.
Side stand it fixable by running a low profile bolt so that the spring bracket doesn't catch on it.
Power isn't quite as smooth as or tractable as my husky.
Can't fit a 14 tooth front sprocket.
Very limited rear sprocket options.
Stock gearing is too low for rd, too high for tight single tracks offroad.
Stickers won't last.
Need to unbolt seat to add oil.
Long range tank (factory option and a must have) makes tank shouds not line up properly.
Suspension is really good (not WP rubbish, I remember when WP used to be good 😔)
Seat us comfy.
Clutch is like a brass button drag clutch an you can't really slip it (there's a mod to fix it)
Feel free to ask me anything and ill do my best to help 👍
@@tassiejeeper01 nice articulation of your experience! I have a 2021 TM 250 and concur with most of your citations. Mine has oil injection tank in the frame, so not necessary to remove seat for oil, and I’ve had no issues with the clutch engagement. Mine is very linear. Not very light, but works well. It’s also very fast, not near as mellow as the Austrian machines.
I liked mine enough to order a ‘23 limited edition.
they are terrible, i would avoid
@@allstrokesmatter136 you’ve obviously never owned one. Or are jaded by some situation.
A lot of ppl think they sound bad at idle lol but they don’t know is their porting is fantastic! That’s how all the factory 2 strokes sounded back in the day lol
Proud to have one! 💙✊🏼🇮🇹
nice
The kickstand is required to do that on street legal bikes at least in some European countries. It’s either that or a sensor that knows when the kickstand is down. It will turn the engine off if you put the bike into gear while the kickstand is down.
Both accomplish the same thing, preventing you from riding with the kickstand down.
The solution with the spring is cheaper and lighter so its seen in alot if not all the enduro bike sold here
Greetings from Switzerland
TM Racing also make engines for karts, I think this at least increases their production numbers for the engines.
I too wonder how they do it, as they are reasonably priced. It's great that a small company can also run alongside the big boys.
yeah, cool stuff
It's so beautiful it's like looking into the sun. It hurts but I can't look away!
The most awesome bike on the Planet!!! Yes it is, we have 2 of them 2010 TM Enduro 250 & 2012 TM 300 MX I used to also have a 2007 TM 250F awesome bike, and my son had a 2007 TM 85MX, cannot say enough good things about them! I used to work for the TM Racing Importer out of Marietta Georgia, my job was to set up dealerships, and I set up 22 across the US, it was unfortunate that the importer didn't do a good job.....The main issue that people have with TM is the fact that just about every importer has great intentions, but somewhere along the way, things happen either in their lives personally or financially, not to mention importers have to deal with the Exchange rate of the Euro, and that has been the only downfall to TM here in the USA, is the Importers, not being able to stay consistent! It seems like Ralph Schmidt and Dave from Get Dirty out of California are doing a fantastic job bringing these bikes into the country. Also just to note every bike has its quirks, nothing is perfect to each rider, but TM Racing is about as close as you can get to that perfection! Cannot wait to hear more about this amazing machine.
Agreed. Ralf is doing a good job. Dave is probably the best guy anyone could have in their court.
That weld spot on the swing arm is on my bike as well. It was not a mistake . It was for balance. Each part is weighed and balanced
I have a 300 ENT TM Enduro 3:00 on it then raced trail riding still runs to this day has a license plate on it one of the best bikes I ever had get down it's the s***finally you have a real bike in there
I remember the very first TM that I ever saw. A 200cc brought in to a dealer in Burlington, Washington, from Canada back in the late 1990s.
It was probably the prettiest dirt bike I ever saw to this day.
Super excited for this TM!
YES
Kyle hopefully Tyler’s GasGas 300 and the TM gets you lots of views n subs for your channel. I tell everyone I know that rides dirt bikes 👍
Yes! I'm so stoked for your reaction on the TM bikes. I personally own 2 (1999 250 & 2013 300 2T).
I hope you fall in love with the build quality and the charm these bikes have like I did.
Cant wait for the next video!
Rear mudguard wears the swingarm--> needs protection, shock has 50mm showa piston with 18mm shaft and the seal head is tm own. Make sure to change the fork oil after some break in rides. Some people use bigger and better batteries than stock.
Where hear change fork oil right away?
@@cowpker4life333 Not right away, would before 30h, like 10h to 15h
I haven’t been watching you for a while. I am really into TM, will be my next bike. Back for the TM content.
I worked on tm at a dealer in New Jersey 20 years ago. They were very trick back then too.
OMG! Frickin masterpiece incredible craftmanship like to get the 300 mx version
It's about time we have a real bike on this channel. I've got the 2022 model.
It's a much better bike then the ktm
WOOT FINALLY A TM! Turn that thing into a Pegasus! I want to see it fly!
Love my 22 tm300en es
A friend of mine has a carbureted TM racing 300... The only problem he has had is helping me clean all the roost off my goggles and front of my Gas Gas 350
Haha right!!I have a TM and I have the same problem lmao!!
That's so sweet u got one I didn't see this happening. I always liked TM racing bikes. I love the look of those TMs. Need to see more of them in the gps
My buddy happens to own this same bike. It absolutely shreds and you’re likely to never see one with you at the track. We turned his into a supermoto in the fall. It’s a wheelie monster. 🚀
awesome!
I own a 21 and it has good and bad. Hang on for the ride. Good luck with parts.
@@2stroke-nut I’m curious what your issue with parts is? I have a 21 tm too and anything I’ve ever needed is shipped to my house within a few days
@@MichaelLee-vk9fy a dead spot when accelerating and can some die out completely. No certain temperature in relation. Had new top end, tps and map sensor replaced along with a reflash of ecu. Definitely no the most reliable. Only starts if the stars align just right.
@@2stroke-nut we’ve already had some issues lol. actually left me stranded one night when I borrowed it for a week. I just look at it like a Ferrari, part of the fun is the maintenance 😂
I like the idea of buying a frame/engine block and having it customized - similar to the way many boutique mountain bike manufacturers offer their products.
Finally a TM! I have the same bike and I have only ever heard it called a TM (brand obviously) EN300 (model). I understand what those other letters are but never heard anyone use them. I love mine and since you have ridden everything I'm eager to see what you think of it. Before buying mine I did a bunch of research and never heard anyone say anything bad about them. Let's see how this goes.
Waiting to see Tyler's GasGas 300 Ironhorse build video !
I still need to pick it up from him. Single dad life makes things hard sometimes.... should have it next week
Tyler’s really cool. I chat with him on Instagram 👍
@@DirtBikeChannel Single dad life? I don't like the way that sounds...
Art work. I would keep it in the living room tell my wife makes me take it out lol
I notice little things, and before you ride it, the shifter needs to be raised 1 notch on the spline ! 🤔🤣
That headlight looks kinda sick
I have a 2022 en carb and after 5 ktm I fiend the best bike ever on it
Buddy of mine here in Michigan has a tm 144. Pretty sweet bike and fun to ride.
I was introduced to the TM bike way back in Alaska. A friends son was racing one... Supposed to be a really good bike for sure...
On the kickstand. Take a close look at the bracket where the spring attaches. There may be another mount point for the spring that will serve to keep the stand down as per normal. Some trials brands have implemented this flip flop design to allow for user preference.
Just grind the nub off where the cantilever link catches and it’ll stay down
You can remove part of the kick stand mechanism so it will stay down.
I like it that it flicks up..
Absolutely gorgeous! Just bought a new 2023 Beta 300RR. Thought that was somewhat exclusive. But no! Looking forward to a ride review!
Dude! Nice looking custom bike stand. You make that?
Have fun denting the radaitors in for turning.
It's kind of a hybrid of fine Italian craftsmanship and a joke at the same time where the base gasket used to be.,. You have orange RTV sealant. Fancy! Custom and handmade 😉
Nice to see you brought some pasta to the table.🤙
Swingarm weld is by design it's for the brake caliper lug.
Exactly !!I can’t believe a bike reviewer didn’t know this
@@tractiontv1181 I like kyle but yes lol.
Finally a DIRTBIKE!! 😃
(and I never had a TM..) 😁
Can't wait to pick THIS BIKE up in July after I win it
YES!!!
Nice bike, I have the 125, for the kick stand You Just pull up the clip( the clip attached to the return spring) on the nut that holds the kickstand and It Will remain still
I have the same bike and I absolutely love it, do yourself a favour and disconnect the red wire with the bullet terminal within the wiring harness that follows down the headstock,
After the time you have spent on KTM's I'd be interested on your opinions after spending a few rides on the en300, me? I found it far superior in almost every way, a few small glitches encountered but less issue than I have had with literally every other brand, wouldn't trade my 22 en300fi for the world
Love my 300 MX version.
Kickstand like that is actually required here in Europe. The alterative would be a off switch that kills the engine if the stand is down but that is another failure point so many bikes don't have that!
WHAT A BIKE!!!
There is a five part TM factory tour series on youtube. Very very cool.
Looks pretty nice! Can’t wait for the ride reviews!!
I had asked you to review this bike about a year ago . Back in October of 2022 I purchased a 2023 TM En 300 ES 2T carb model. Excellent bikes
YEEEESSSSSSS I have one every time I ride it I love it more and more, like Jeremy Clarkson says wuuhhaaaaattttt aaaa machiiinnneeeee
About time got a good bike.
Been wondering if you were ever going to try a TM. I have 2022 300fi as well. Amazing bike.
SIMPLY THE BEST
The problem is getting parts (OEM/ Aftermarket) for the bike. I'm sure its fine.
Parts haven’t been a problem for me.
I saw one at a dealer last year and loved it.
The bike exhibited quality just sitting there.
Almost replaced the KTM I was getting new at the time.
Like the looks of the headlight.
Has VForce reeds and KYB 👍
No stupid TPI but has TBI.
I would leave the horn on to get your riding budy's attention when you need to.
The light is very bright too. I did a 24 hour race a few months ago, and the bike headlight overpowered the two helmet lights I was using.
I had a 1999 TM 300 enduro 24 years ago already, It was a great bike and I road the stuffing out of it. Had a bit of bar vibration so arm and hand fatigue was an issue but it was a great handling bike on Idaho single track. It was a handmade work of machining art. Getting parts then...
Still riding a 2012 300te that I've owned for 10 yrs. Tried some new 300s, they feel the same
When the sweepstakes giveaway happens, I'm going to buy a lot of your swag.....
@Kyle - Thank you for the review and very much looking forward to your impressions going forward. Just a couple of comments for your general information - The welding dot is not a fluke, it is intentional and is something they do to all of their bikes, maybe to mark their uniqueness? The exhaust and pipe are are made by Netherland based HGS. Again, thank you for all of the quality content.
Yes please!
Looks good. Being over 50 I’ve been looking for a 300 2t for a while. Would mind trying this bike. Too bad there are not many dealers up here in Canada that carry this bike.
The new beta 300rr 💪 have the 2022 and love it
I believe weld on swing arm has something to do with brake, as i see on many others
Believe for brake bracket mount.
That is one Italian beauty! Looking forward to your first impression!
Make sure get the moikin mods maps if havnt. Map1 more power and map2 lot tammer vs the stock maps.
Yes please. More. TM TBI vs KTM TBI
YES!! The name is definitely a mouthful lol
NO DOUBT
In Europe the Kickstand has to come up automatically to be street legal.
I’m excited to hear your first impressions on riding it!!
Hi, im an Italian "Endurista" (means enduro rider), and i'll explaing all the lecters EN=ENDURO, Fi=FUEL INJECTION, 2T(2 Tempi in Italian)=2 Stroke , anyway i follow you since a lot hoping to receive a very detailed review after you're going to use it really hard to test it properly. See you💙
Them TM are some fun bikes to ride I got to try the 144 and 250 and they are awesome bikes for sure 😄🙂
I know this isn't the first time you've seen the kickstand fly up like that. KTM did it for quite a while, so did Husky.
KTM and Husq still do that with kickstands. They are like that on the showroom floor and then the bikes come with a replacement bolt that allows detent to stay down
Bump for this! I remember being a young kid at a dealership that carried KTM and about had a heart attack when I went to stand the bike up straight to get a feel for the weight of it and the kickstand flew up lol.
Very cool can't wait to see more videos on this!
Those side stands are adjustable to stay down, you just move the spring pivot point
My brother used to have a 2002 tm en 250
Let’s hear it!
I have not seen or ridden a tm before and I can't wait to see you put it through it's paces, but I think I would like to ride it in road and in the dirt.
I’ve got the same.. in Pink.. it’s a rocket 🚀
To me I perfer the Nissin rear brake. It is much easier to modulate than the Brembo imo. The Brembo is like a light switch.
The squeaking Brembo's drive me nuts too.
pros and cons for sure. I prefer the Brembo front, but don't really notice on the rear
That is why they put it on! Everything was purposeful
on KTM yes but brembo rear on Sherco works perfect
@@DirtBikeChannel Yes I Love the Brembo on the Front as well
It would be good to see you review a Rieju, especially the 200, as far as I know it's the only current alternative to the Beta 200.
baby steps!
I think Rado @ Dirt n Iron has one now. I saw it on his Instagram this morning 👍
@@DirtBikeChannel definitely do the Reiju. The 300 is a nice throwback. Simple and carbureted with an external estart
Blows my mind that a man at your level doesnt know that you need to move the spring location to either make the stand auto stay, or auto retract ❤
ive seen google photos but i never seen anyone truly own one
Super excited for your videos on this bike. It will be interesting to see your take on the TM bike vs the other main stream brands.
tm falls way short!
Good luck with the fuel injection. It's been quite problematic for some riders in various ways. Similar to TPI in KTM models, quite a few riders wish they'd bought the carb model instead which has better low down power (and less problems).
I've ridden both, defintiely go the TM carb if you want the low down grunt
i know a guy who couldn't get his TPI Fi fixed, dealer couldn't either. eventually TM bought the bike back from him to avoid negative publicity.
is the 2023 carb version also oil injected?
Only problem they have had is power valve rest more common on the fi. They are tbi(before ktm was also tpi before ktm). Have seen next to 0 issues with the injection system it self vs beta oil injection issues and ktm tpi issues.
There isn't various problems with TMs TBI system.
AWESOME!!!...exotic and beautiful...cannot wait for the testing and reviews!!!!
Hey you don’t have to say the exact name every time TM300 works after the 24 times you said it in 3 minutes we get it I promise
Awesome bike. Thx Kyle
Trying to get a Fantic 300 !! 👍
Can't wait to see how it goes. Honestly though, until I can source parts for it quickly it could be the best unicorn on the planet but I'm out.
Parts are not a problem. Get Dirty Dirt Bikes, affiliated with the importer. All TMs go through his shop. He has everything you need for the bike. I didn’t like the AXP skid plate and had SXS make one for me instead. Support is out there, and it’s a solid machine that doesn’t need much.
E start with the kick back up, they know what they are doing.
Franks Motorbikes in Bellevue WA has 5 of them as well as Riemann 300’s. They are the biggest Beta, TM and Rieju dealer. Frank is great and will ship. Check him out he is the Beta and TM guy
Looks like a wheel sensor at rear caliper- por que?
Different kickstand bolt to defeat auto retract and you're all set.
Another comment noted disconnect of a wire in loom, wonder what that buys you.
Looking fwd to ride review!
I'd love to see a side by side trail comparison of the 300TM and the 300XC.
TM's is the best f..k the rest🤟🏽🤟🏽🤟🏽 thanks for showing it👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼