Ammo Can BlueTooth Speaker Build
ฝัง
- เผยแพร่เมื่อ 15 ก.ย. 2024
- In this video I will show you how to build your very on BlueTooth speaker using a military ammo can. You can use this speaker with a phone, Android or Apple, iPad or any other tablet or play music right from your computer.
I realized after posting the video that I left out a short segment on connecting the amp. It's very simple. At 28:13 I am showing a wiring harness and it ends with a positive and negative wire with a female connector on each. The power cord to the Bluetooth/amp module plugs in there.
Be sure to Like and Subscribe
Links to the parts you will need;
Speakers smile.amazon.c...
Ammo can smile.amazon.c...
Grills smile.amazon.c...
Amp/Bluetooth module smile.amazon.c...
Battery Charger smile.amazon.c...
Switches/Volt Meter smile.amazon.c...
By far the best and simplest build video I have come across so far. Great build! I love it!
Thank you
I like your build, very inspirational.
You must have family in South Africa with your clothing choice. Very nice.
I built one using the instructions you gave along with the parts list and I have to say it sounds very good thank you for sharing
I'm glad it worked well for you. Thanks and enjoy.
That is a very good video. I love the look of that box. Looks very tough. Damn good build.
Thank you sir
Anyone else think he looks like Jeb Bush? Great DIY I want to build one!
knowuseforaname I don’t see it, but I’ve been told that a few times.
nice job.. i have been debating adding a port to my ammo boomboxes... i like how you have the 12v socket as the charger, mine has a separate plug to charge.. didn't realize the cigarette lighter port could be used for outgoing power and also incoming to charge...
Thank you for the great video and parts list !
This will be a great build…need more info on the battery…what, where, how….
The thing cranks!
Nice, clean build. I'm going to do a couple of videos on mine. It's not as clean inside as yours, though. I used larger speakers in a larger can for more frequency response out of the woofers. Call me a bass-head. :)
Thanks for the kind words.
Kojak Durham rocking good news! That is the way i am going as i am rescuing the bass, treble and crossover from a pair of bookshelf speakers with damaged cabinets. I think this ammo box idea is totally mint as it is a far more rugged and practical design for field use and actually gains character with a few knocks and scratches. Really looking forward to gigging this at one of our hobo changba parties next summer! 😂😂😂
This definitely looks a good practical build that will be rugged in the field unlike the poncey commercial off the shelf ones. Just a few things though when clamping the ammo box in the workmate try putting some offcut wood noggins inside the box that fit closely and you can clamp it more tightly without fear of crushing it. Also i did not like the way you did the cut outs on the stencil print side of the box as it looks messy on the finished item. Surely the plain side would have been better?
Actually I wanted the stencil side to be showing on the front. I've done a a few using new cans that had no stenciling on them.
Hello, love your build, I'm ordering the parts now, but what size battery do you have Amp Hours?
Here is a link to the battery I used. smile.amazon.com/dp/B007ROUG42/?coliid=I3EYS9YD1T8SFI&colid=1LFKUAVHIC2E8&psc=1&ref_=lv_ov_lig_dp_it
Very cool.
What would be a good plastic size ammo box to get for that amp you have in the build and plye 6.5. 1/2 150watt marine speaker?
2 questions. First question. How do you do the power cord from the outlet to the cigarette lighter adapter. (What do you use?) Second as everyone else has asked about connecting the amp for power. I saw the video and it shows the wires to connect the amp but not what wire you used from the amp to connect to it. Very confusing both of these questions. Otherwise very informative and I'm looking to build it this weekend but need these answered
The amp instructions are in the video description above. I guess it was left out because it is so simple. I'm not sure what you mean by "The outlet to the cigarette lighter adapter". It's just a 12 volt charger with clips for negative and positive. Cut the clips off and wire them into a cigarette plug.
I am doing a 3 part instruction video myself on how to build a Bluetooth cooler
What are you using for your sound deadening mat, Yours seems to adhere really well to the box
How is the amp connected to the power with the excess two connectors? I’m building this right now and am at a standstill. Thanks and the video is extremely helpful!
Sorry, I left a short clip out of the video. At 28:13 I am showing a wiring harness and it ends with a positive and negative wire with a female connector on each. The power cord to the Bluetooth/amp module plugs in there.
Looks really nice how long does the battery last
3 questions.
How long will the battery last?
I noticed the amp you linked was 50 watt but the speakers 180 watt, is that right/does that cause any issues?
To allow the 12v to be used to charge did you have to wore it a different way?
Honestly, I haven't timed it to see how long the battery will last. The speakers being a higher wattage than the amp is not an issue. if it were the other way around then that would be a problem.
Jake Evans The only real problem with using speakers with a higher power rating than the op amp is that they may sound a little understated due to the amp being underpowered in relation to them. They will not neccesarily draw more current than the op amp can provide but will definitely lack gain when you crank it up to 11.
180W peak. Those are no more than 50w rms. You pair speakers to amps using rms wattage not peak
Good build. I'm planning on making one using your method of setup. How did you connect the amp to the wiring harness?
Thanks. I just realized that I left out a short clip of video. At 28:13 I am showing a wiring harness and it ends with a positive and negative wire with a female connector on each. The power cord to the Bluetooth/amp module plugs in there.
The wire itself, or did you add connectors to the ends of them?
Around the 3:30 mark I talk about the Bluetooth/amp and that you can get it with a power supply. I cut the DC cord of the power supply and connected it to my wiring harness. You can also buy a package of the male connectors and make your own connector to connect to your wiring harness.
Great video! What were the speakers you used in this one?
Pioneer, smile.amazon.com/dp/B000230LBI/?coliid=I80EMMAETT394&colid=10MXFNK3C7ZIV&psc=0&ref_=lv_ov_lig_dp_it
Can you go into more detail on powering the amp? Did you splice in before or after the transformer?
There is no transformer. You have the battery that goes to the switch, and from the switch you have a wire that is connected to the amp.
@@brentspepper2087 I was talking about the amp itself. The amp has a wall plug in that goes to a small transformer with a smaller wire the plugs into the amp. In this case, I would assume that you splice the wiring from the t12 VDC battery into the wire past the transformer, correct?
@@600gmc I understand. This has been asked before. Some how that portion of the video wasn't included. I simply added a male adapter plug to a wire coming from the switch and going to the amp. The transformer than came with the amp is not used.
At 28:13 I am showing a wiring harness and it ends with a positive and negative wire with a female connector on each. The power cord to the Bluetooth/amp module plugs in there.
Can you snap a picture of the wiring harness going to your AMP? I have read through the comments, but am a visual guy. I don’t want to mess this thing up, and have to wait for another AMP to come in the mail. Stationed overseas and mail can sometimes lag… Thanks much in advance!!
I don't think I can reply with a photo in the comments section.
Brent, I followed your plan and love the sound from this. I have begun getting a popping noise from the speakers after 45 to 75 minutes of continuous playing. I'm at a loss as to what can be causing this. Any ideas or suggestions? Thanks in advance.
John Lewis check all you wiring connections. Could be temperature related since it starts after it has played a while.
What would be a good black plastic ammo box that this speaker PLMR60W dimensions is 7.4 x 7.6 x 7.1 inches so what should the product dimensions on the ammo be that fit the speakers on the same side ?
Unless it is really thick plastic, I wouldn't go with plastic. You could try one of the plastic cases that Harbor Freight has. They aren't ammo boxes, but more like a Pelican case.
@@brentspepper2087 what would good thick plastic to look for on plastic ammo box
Where did you find the charger itself with the male connection on it, that seems to be the only parts I can't find. Thanks!
I made it. I bought a small 12v charger and cut the alligator clips off and connected the cigarette lighter plug onto it.
You didn’t show how to wire up the amplifier?
At 28:13 I am showing a wiring harness and it ends with a positive and negative wire with a female connector on each. The power cord to the Bluetooth/amp module plugs in there.
Does a mid range speaker even need a port? I thought ports were for sub woofers.
I'm not sure if you could get by without a port or not. Because of the confined space and the amount that these speakers move, I opted to put a port in it.
@@brentspepper2087 Ok so next question, Do you need to measure the cubic inches to figure the correct port size? There are several sites that help you figure port size for sub cabinets
I didn't go so far as to calculate the port size. If I were building a larger, more custom speaker system I would. For this rugged, outdoor type speaker I didn't bother.
@@brentspepper2087 where did you purchase the port from? i did not see it linked
@@chrisdilley266 the port is a tube that goes in a golf bag. I just cut it down to length. I get them at Academy or Dick's Sporting Goods.
What speakers were used in this video on the can you assembled? The link to parts says Pyle but those were in the can you had previously built. Do the Pyles sound as good?
I've put the Pyles in 3 boxes and for the money, they sound great.
Brents Pepper The sound coming from the box you built in this video sounded great.
@@jdreichenbach thank you sir.
Would you need a diode in order to use this while charging?
No you wouldn't. I've used it while charging many times.
About how much was the supplies needed for this project?
I think around $125
How did you wire the amp? You skipped that
It is in the video description.
I must have gotten the wrong amp cause mine has a wall plug with a box connected to the cord. I used the link provided. Do I just cut the plug off and add connectors? And do I leave the box connected to the cord?
Maybe you can send a pic of the amp wiring?
That would involve me removing the amp. Seriously it is very simple.
What gauge wire did you use for your wiring harness?
I think it was either 12 or 14 gauge.
How did you wire the power adapter for the amp please
This has been asked before. Some how that portion of the video wasn't included. I simply added a male adapter plug to a wire coming from the switch and going to the amp. The transformer than came with the amp is not used.
At 28:13 I am showing a wiring harness and it ends with a positive and negative wire with a female connector on each. The power cord to the Bluetooth/amp module plugs in there.
Did you install any inline fuses?
Nathan Hoffman no I didn’t.
I missed how did you hook the amp to be powered on with the power switch?
I really like your build and the simplicity thanks for the detailed video!
Sorry, I left a short clip out of the video. At 28:13 I am showing a wiring harness and it ends with a positive and negative wire with a female connector on each. The power cord to the Bluetooth/amp module plugs in there.
How does using a metal case affect the range of the bluetooth?
Kirk Armstrong it does seem to limit the range. I have not done an exact measurement of the range though.
@@brentspepper2087 I figured it would. Thank you.
Is that a 12v or 6v rechargeable battery
12 volt
What voltage battery you using
12 volt
How long does this battery last?
I'm not sure. I haven't done an endurance test on it.
Before you ask about wiring up the amp, it is in the description above. It's really very simple.
Im trying to find an amp without a oriental for my build, not having any luck.
What do you mean by "oriental"?
Chinese person saying bluetooth mode
hey my man , it's not Chinese person speaking when the Bluetooth powers up it's a Japanese lady . But anyway try the TDA7492p 50w 50w
You keep saying the amp wiring issue is so simple, but you are leaving something out.
Are cutting and modifying the power cord that came with the amplifier? How are you transitioning to the actual connection on the amp unit? This is a great video except for this one very important detail that ultimately make the entire video useless. We are amateurs not electricians.
Yes, I accidentally left a portion out of the video. It's in the description above.
What kind of battery life are you getting with the battery?
I've never ran it from full charge to dead to get a battery endurance. I'll say this, at pool parties and such where it was used for 4-5 hours, it has never gone dead.
Great, thanks for the timely response.