Dealing with a Leak During an Epoxy Pour

แชร์
ฝัง
  • เผยแพร่เมื่อ 5 ธ.ค. 2024
  • In this video I discuss one way to deal with an Epoxy leak if it is experienced after pouring their epoxy river. I learned this information by subscribing to BlackTail Studio TH-cam Channel who shares many useful tips and tricks when dealing with epoxy.
    Below is a link to Flexpaste on Amazon. It is an affiliate link so I receive a small commission if you use the link. The cost to you is the same either way. You can also buy Flex paste at most local hardware stores - Home Depot, Loews, etc.
    Flex Paste on Amazon: amzn.to/3SnJzhl

ความคิดเห็น • 10

  • @kevinrich4637
    @kevinrich4637 10 หลายเดือนก่อน +2

    I was beginning to worry that you were okay. Great information. Thank you. Good to see you back around.

    • @RobSandstromDesigns
      @RobSandstromDesigns  10 หลายเดือนก่อน

      Thank you for thinking of me. Will try to do better at video releases.

  • @brianwrigglesworth3599
    @brianwrigglesworth3599 10 หลายเดือนก่อน +1

    Where have you been ? Have been waiting for your next video which are brilliant thanks for taking the time to do them

    • @RobSandstromDesigns
      @RobSandstromDesigns  10 หลายเดือนก่อน

      Wow! I appreciate your kind words and that you watch and comment on my videos. I still owe everyone the last video in the playlist I was working on in December. Was feeling guilty about not getting that out.
      My Christmas Commission orders stacked up and kinda overwhelmed me so put off the video making during that time, then I got COVID. Then I bought me a Bambu X1C printer and started heading down the Fusion 360 and 3D printing rabbit hole.
      Doing better now and trying to learn to balance my making things and making videos. Still trying to find that balance. Thank you for your support of my channel.

  • @eitantal726
    @eitantal726 10 หลายเดือนก่อน +1

    my first thought was hot glue. Does hot glue not work?

    • @RobSandstromDesigns
      @RobSandstromDesigns  10 หลายเดือนก่อน

      I have not tried hot glue, but for a small leak like I had in this example it probably would. Hot glue or silicone would be some of the first things I would try if I don't have flex paste. I have seen others use hot glue and silicone for small leaks. It is always a challenge with an active leak to get other products to stick to the forms and stop the leak, at least until I found the flex paste. But, flex paste can be pricey for some people's budgets.

    • @BobBob-eh5sb
      @BobBob-eh5sb 10 หลายเดือนก่อน +1

      If you use hot glue in conjunction with duct tape you might have some luck. I used it cause it was all I had to try. Applying the glue, then sticking the tape over it helped to hold the glue in place till it set up. It took several tries or layers. Looks like the flex paste would be the way to go.

    • @RobSandstromDesigns
      @RobSandstromDesigns  10 หลายเดือนก่อน

      @@BobBob-eh5sb thank you for your insights and what you have used before.

    • @eitantal726
      @eitantal726 10 หลายเดือนก่อน

      @@RobSandstromDesigns Hot glue is a common item, FlexPaste is less common. I already use hot glue regularly when I CNC: Painters-tape-back-to-back method

    • @RobSandstromDesigns
      @RobSandstromDesigns  10 หลายเดือนก่อน

      @@eitantal726 thanks for your insights - with that said CNC and fixing an active epoxy leak are totally different issues. I would never use flex paste on my CNC - wouldn’t even want it close to my bed.