Element enduro sendero, upgrades!

แชร์
ฝัง

ความคิดเห็น • 61

  • @NicholsRCGarage
    @NicholsRCGarage 2 ปีที่แล้ว

    Love your chassis! I have quite a few Club5 accessories myself and find myself tending to keep coming back to get more accessories from them. I love that you kept the original body, I see a lot of folks completely toss the original body and buy something new. I love Element's design style on this truck.

    • @gerrysoldguyreview
      @gerrysoldguyreview  2 ปีที่แล้ว

      Thanks Jon! With all the wranglers in rc it was nice to see a old 80's style truck!! Club5 makes excellent parts! Some are a bit pricey but worth it in my book!😁

  • @hellorc7678
    @hellorc7678 3 ปีที่แล้ว +1

    Great shows again this weekend. We watched them all but haven't had time to comment. Been hard at work at the landing! Like the fender enclosures. Fit really well with the body on. Looking good!

    • @gerrysoldguyreview
      @gerrysoldguyreview  3 ปีที่แล้ว

      Thanks jason!! I see you have been busy!!😁😁😁

    • @hellorc7678
      @hellorc7678 3 ปีที่แล้ว +1

      @@gerrysoldguyreview sure have! Out in the woods digging up broken concrete an rocks right now!!

    • @gerrysoldguyreview
      @gerrysoldguyreview  3 ปีที่แล้ว

      Must be nice!! We had another snowstorm that dumped 10inchs of snow, worst storm this year!! I will be snowblowing my trails out again today!🤔🤔🤔🤔

    • @hellorc7678
      @hellorc7678 3 ปีที่แล้ว +1

      @@gerrysoldguyreview I almost feel bad to say it's 75 and sunny here today 😎

    • @gerrysoldguyreview
      @gerrysoldguyreview  3 ปีที่แล้ว

      It's OK we are just having a weird winter, 40 last weekend 35 this weekend tons of snow now it's 8!!!

  • @theguyinthecomments9543
    @theguyinthecomments9543 3 ปีที่แล้ว +1

    I have the trailwalker and so far I only have the club 5 hexs and metal gears. Now I have to take it to this level. Nice work 👍

    • @gerrysoldguyreview
      @gerrysoldguyreview  3 ปีที่แล้ว +1

      Thanks!! Element makes a nice rig, it was time to give it some love😁😁

    • @theguyinthecomments9543
      @theguyinthecomments9543 3 ปีที่แล้ว +1

      @@gerrysoldguyreview no prob man, appreciate the quality information. I agree. Im Subbed 👍

    • @gerrysoldguyreview
      @gerrysoldguyreview  3 ปีที่แล้ว +1

      Thanks so much flin!!

  • @3dman875
    @3dman875 3 ปีที่แล้ว

    Nice looking

  • @Pezzapoo
    @Pezzapoo 3 ปีที่แล้ว +1

    Can't beat well made upgrades mate, they look really good

    • @gerrysoldguyreview
      @gerrysoldguyreview  3 ปีที่แล้ว

      Thanks bub!! This is the second time I've used them and so far iam liking the parts!!😁😁😁

  • @ronhelman3985
    @ronhelman3985 3 ปีที่แล้ว +1

    Hey Gerry, how ya doing my friend???? Looks great, they have a lot of cool stuff. I really like the finders and the roll bar looks awesome!!!!

    • @gerrysoldguyreview
      @gerrysoldguyreview  3 ปีที่แล้ว +1

      Iam good ron! And you?? Except for 10inchs of fresh snow that is!!🙄🙄 I have found I really like their stuff!!

    • @ronhelman3985
      @ronhelman3985 3 ปีที่แล้ว +1

      @@gerrysoldguyreview sorry buddy, I just opened the window to let fresh air in. It's sunny and 71 degrees!!! This is my kinda weather set under a shade tree a lite breeze. I think that the weight you added to the element will make a big difference in the way it preforms on the course. You should try it again to see how it does!!!

    • @gerrysoldguyreview
      @gerrysoldguyreview  3 ปีที่แล้ว

      Hey ron!! Iam ignoring your weather talk😁😁 I already tried the element on the course!! And it did much better, it's amazing what just a little weight can do!!

  • @WoodsUnknown
    @WoodsUnknown 3 ปีที่แล้ว +1

    Great info Gerry. Would love to see your big twin steer hooked up with trailer and excavators. Keep these awesome videos coming.

    • @gerrysoldguyreview
      @gerrysoldguyreview  3 ปีที่แล้ว

      Thanks woods, in my channels Playlist go check out test drives!😁no plastic excavators but a pretty good load!

    • @gerrysoldguyreview
      @gerrysoldguyreview  3 ปีที่แล้ว

      Bye troll

    • @WoodsUnknown
      @WoodsUnknown 3 ปีที่แล้ว

      @@gerrysoldguyreview ?

    • @gerrysoldguyreview
      @gerrysoldguyreview  3 ปีที่แล้ว

      What's up?

    • @WoodsUnknown
      @WoodsUnknown 3 ปีที่แล้ว +1

      @@gerrysoldguyreview I don't know how that happened I had to go look and for some reason I was unsubscribed.

  • @shadow7796
    @shadow7796 3 ปีที่แล้ว +1

    That's cool,man. You know I'm an Element junkie. Those diffs will slide over stuff easier now. All you need to do now is get some aluminum wheels and slap some Pitbull around it. At this point you might as well anyway. It adds a perfect amount of weight to each corner while keeping rotating mass in check. Use some good foams , especially in the front. That was one of the best things i ever did for mine. Was much more stable and predictable. I still get surprised by what it can do just about every time I run it. I enjoy seeing the noticable difference in performance after I upgrade something and that was one of the better ones. What's funny is that I've got a set of those fender liners with the rock lights already installed, sitting in a box under my desk. Doesn't fit the TW without some trimming.

    • @gerrysoldguyreview
      @gerrysoldguyreview  3 ปีที่แล้ว

      Sorry bud!! I dont do aluminum wheels way to expensive!! I do have a set of proline hyracs on the way I may try, but with the tires vented and the extra weight it did much better on the course!!😁😁
      Why don't you try trimming the fender liners? Not only do they add weight but they look great!!

    • @shadow7796
      @shadow7796 3 ปีที่แล้ว +1

      @@gerrysoldguyreview you can get a new set of the Injorra brand aluminum wheels on eBay for 40$ and from everyone I've seen or talked to that run them, they're really good just lower cost. I almost got a set of some aluminum gunmetal grey wheels myself. If you get a few minutes, look on there. I wouldn't steer you in the wrong direction for anything, there's some nice looking wheels on eBay for great prices. The plastic factory wheels cost 42$. Which compound did you go for with the Pro-line?

    • @shadow7796
      @shadow7796 3 ปีที่แล้ว +1

      I did trim those liners and they do fit now. I wanted to wait till I was sure I was done with the frame and shock towers,ect. I kept having to take 'em off every time I went to change something, so I just left'em off. I'll probably put them back on pretty soon. How come you didn't go ahead and pick up the heavier steering links when you got the high clearance ones?

    • @gerrysoldguyreview
      @gerrysoldguyreview  3 ปีที่แล้ว

      Come on Shannon, I know you would never steer me wrong😆😆
      I don't do eBay but maybe I will look at Amazon, they usually have tons of injora stuff! I got my tires in the g8 compound.
      Thanks buddy😁😁😁

    • @gerrysoldguyreview
      @gerrysoldguyreview  3 ปีที่แล้ว

      That is the only downside to fender liners that I've found is when working on the truck!! Put quite simply I forgot the links for the steering I had them but forgot to click in the cart 🙄🙄🙄 so they are waiting in my cart till I make another order!

  • @3dman875
    @3dman875 3 ปีที่แล้ว +1

    I like the club 5 things they look nice

    • @gerrysoldguyreview
      @gerrysoldguyreview  3 ปีที่แล้ว +1

      They make excellent parts fred!

    • @3dman875
      @3dman875 3 ปีที่แล้ว +1

      I ordered a bunch of my Styrene for my bronco yesterday so I can start to build the interior

    • @gerrysoldguyreview
      @gerrysoldguyreview  3 ปีที่แล้ว +1

      Nice fred! I think an interior is the best way for me to try my hand at styrene building!

  • @josuesepulveda5694
    @josuesepulveda5694 3 ปีที่แล้ว +1

    Hello Gerry nice video!!, by the way where did you bougth those fenders inners? they looks really cool!

    • @gerrysoldguyreview
      @gerrysoldguyreview  3 ปีที่แล้ว

      Hello josue!! I got all the parts from club 5 racing, they make great parts for a nice price!!

  • @celtish63
    @celtish63 3 ปีที่แล้ว +1

    Aren't your high clearance links on backwards? Shouldn't the bend be at the axle end?

    • @gerrysoldguyreview
      @gerrysoldguyreview  3 ปีที่แล้ว +1

      Hello Stan! I thought that to, but club5 shows all their element kits mounted this way, there sxc kits mount the other way. Under compression the work flawlessly 😁😁

  • @zackarylabarr5919
    @zackarylabarr5919 3 ปีที่แล้ว +1

    Hey what did you use for an interior?

    • @gerrysoldguyreview
      @gerrysoldguyreview  3 ปีที่แล้ว

      Hello Zachary 👋, I believe it's out of the axial dingo body, any axial truck body I've retired I cut out the interior of.

  • @tyukikiquinchi7367
    @tyukikiquinchi7367 3 ปีที่แล้ว +1

    Where can i get those inner fenders?

    • @gerrysoldguyreview
      @gerrysoldguyreview  3 ปีที่แล้ว

      Club 5 racing !😁

    • @tyukikiquinchi7367
      @tyukikiquinchi7367 3 ปีที่แล้ว +1

      @@gerrysoldguyreview they don't ship in the Philippines sad.

    • @gerrysoldguyreview
      @gerrysoldguyreview  2 ปีที่แล้ว

      Sorry bud that's bad. I really like their stuff I have it on 2 trucks now!