If you’re ever injured in an accident, you can check out Morgan & Morgan. Their fee is free unless they win. For more information go to www.forthepeople.com/SkateorDie
Bro i spent like 10 MINUTES ON MY COMMENT ON THE LAST VIDEO. TL;DR: 1. Wear a beanie, its soft armour. 2. Gym/training gloves for street skating and suburban bombing helps with rolling on bitumen. 3. Lace you shoes enough that they cant slip off easy so you dont slide outta yo shoe & off the board when you pop 4. Oven is an alternative to microwaving shoes 5. Keep in mind if you shoe goo laces, you cant replace them if they snap where you didn't goo. I shoe goo spots to reinforce some shoes, but keep it away from my laces (i have tonnes of spares) There was a sixth but i cant remember
BRO CONGRATS on that morgan and morgan sponsorship, that shit is so funny and so perfect at the same time. reminds me of the good old days seeing personal injury ads in between my tv cartoons
I managed to let my board shoot out in front of me on a slippery road. I got completely floored, landed on my tailbone. Needles to say, 5 days after that accident, while still in pain, I bought butt pads.
lmao the intro I actually got hit by a jeep omw home from getting a pizza I jumped off the board and didn't get hurt, pizza was fine, board was under their wheel but it was fine so I just laughed and told homie he was fine and went on about my day
Rodney Mullen figured out that putting your wheels in the freezer makes them last longer. It affects the urethane. This might only be for the original formula, though. Rodney Mullen does have a PHD in biochemistry, so he knows a lot about chemistry, and should place this one on "the levels of accountability" as PHD. I think it 72 hrs. or longer in the freezer for it to make a difference.
Another really good hack is rubbing a hot glue stick really fast in the hole or places where a shoe gets worn down bc it’s like shoe goo but wayyy cheaper
Try cleaning your bearings with Brake Cleaner, you can just leave the bearings in the wheels on the board, spray some in until it starts to drip, then spin the wheel with your hand (give it a good whirl), they will be perfect every time and much less effort than with Windex.
@@DannyGruesome That is also the case with Windex (its also a degreaser), I personally run my bearings without grease, but I apply some drops of chain/sewing machine oil!
@@polaria.coronel-gt2762 i guess if theyve made it far enough to need a windex job and still go for a month or two after that its worth it, with or without lube lol
Freezing your wheels is the reason that causes flat spots over time. Every since i dont put my wheels inside the freezer i dont ever get flat spots anymore and i already had a few pairs of new set of wheels to prove that logic point.
Shoe goo CAN fix a hole in the sole of the shoe... got to let it dry for 24-48 hours or the griptape will destroy it immediately. And it doesnt grip the ground very well if at all depending on the surface you're skating.
4:45 Jamie Foy's bearing trick with the Windex rinse? It's a prank! 😆 Jamie Foy rides Tungsten-coated, Bronson RAWS! If you ride un-coated steel bearings without a couple drops of Bones Speed Cream? You WILL prematurely wear out your bearings for no good reason.
ShoeGoo and Super glue definitely work on laces… but, when skate shoes were iconic. Unless you have pair “Eś Koston” which you shouldn’t even skate in at this point, it’s cheaper to just buy new shoes! LoL
_"Cariuma isn't a real skate shoe brand because they do brass eyelets..."_ Not even playing Devil's Advocate for Cariuma but, Vans Authentics since their conception until this day do brass eyelets by default.
"try to avoid those [head injuries] at all costs! [I am not gonna mention wearing a helmet though]" just wear a goddamn helmet, it looks super cool and even better whenever you bonk your head on the concrete and stand right up smiling at your friends who are glad you are wearing it.
This might be funny for y’all but, I skated when I was 3 through 6 Years old, of course no tricks (goofy), then when I was a teenager and I started skating I only could do regular tricks, so idk if I’m a switch pro or what lol
Feels like the windex trick is put here by guys wanting to sell more ball-bearings. Since u dont mention it, let me: This is a great way to dissolve any lubricant in the bearing. And yeah, they will be faster. Until you have used them for 12 hours and then they will be busted. They might spin badly or not at all. So use this trick to bust your bearings real fast. That said, remember to grease those bearings up again, then this tip is fine.
Quite funny with the morgan and morgan ad; cause if one of your bearings seizes at the right moment, I guess the probability you will get hit badly by a car is higher, and that shit is m&m's bread and butter...
Jamie Fiy is the man ! That said please don’t put windex on your bearings. I’m not trying to be a dick, but I’ve skated all my life and I fix airplanes ✈️ for a living. If you are going to use Windex to clean your wheels and bearings, please apply some type of grease or speed cream afterwards because all you were doing is cleaning off the lubrication that was on it and the dirt. Therefore the bearings are metal to metal and that’s why they’re going faster but you’re wearing the shit out of them. That’s fine if you’re sponsored, no disrespect to Jamie but I am not sponsored 😂. You can use Windex but just know bearings last longest and are meant to have a thin layer of grease (speed cream is grease ) plain old high temp wheel grease out of a auto zone will do just as fine as any of the expensive stuff. Ceramics I can’t say , I’d just follow the instructions that come with them. They are there for a reason. 😂 All respect 🫡 to Jamie Foy for being one rad MOFO !
Using washers and spacers is more important to bearing longevity. I have a set of old Russian bearings that are about 30 years old. Been running them dry the whole time. I spray them out with WD-40 every 2 months.
If you’re ever injured in an accident, you can check out Morgan & Morgan. Their fee is free unless they win. For more information go to www.forthepeople.com/SkateorDie
Bro i spent like 10 MINUTES ON MY COMMENT ON THE LAST VIDEO.
TL;DR:
1. Wear a beanie, its soft armour.
2. Gym/training gloves for street skating and suburban bombing helps with rolling on bitumen.
3. Lace you shoes enough that they cant slip off easy so you dont slide outta yo shoe & off the board when you pop
4. Oven is an alternative to microwaving shoes
5. Keep in mind if you shoe goo laces, you cant replace them if they snap where you didn't goo. I shoe goo spots to reinforce some shoes, but keep it away from my laces (i have tonnes of spares)
There was a sixth but i cant remember
BRO CONGRATS on that morgan and morgan sponsorship, that shit is so funny and so perfect at the same time. reminds me of the good old days seeing personal injury ads in between my tv cartoons
Am I tweaking or did he post this already
He re uploaded it
Nope you ain’t tweaking
Tweaking blud
Na u aint
No youre not or i am tweaking too
I managed to let my board shoot out in front of me on a slippery road. I got completely floored, landed on my tailbone. Needles to say, 5 days after that accident, while still in pain, I bought butt pads.
Gotta protect the cake.
No but a car run my skateboard over and the worst part is that they did it on purpose 😭
11:54 fun fact, there were only 3 blades in hons hand. There are 4 cuts on his face.
lmao the intro I actually got hit by a jeep omw home from getting a pizza I jumped off the board and didn't get hurt, pizza was fine, board was under their wheel but it was fine so I just laughed and told homie he was fine and went on about my day
I personally love the stiffness of new shoes, makes my footwork feel "tighter"
Rodney Mullen figured out that putting your wheels in the freezer makes them last longer. It affects the urethane. This might only be for the original formula, though. Rodney Mullen does have a PHD in biochemistry, so he knows a lot about chemistry, and should place this one on "the levels of accountability" as PHD.
I think it 72 hrs. or longer in the freezer for it to make a difference.
Shoot, and I was worried about leaving my spares in the garage over winter 😂
It doesn't make any difference.
We need a best gifts for skaters 2023
Another really good hack is rubbing a hot glue stick really fast in the hole or places where a shoe gets worn down bc it’s like shoe goo but wayyy cheaper
Try cleaning your bearings with Brake Cleaner, you can just leave the bearings in the wheels on the board, spray some in until it starts to drip, then spin the wheel with your hand (give it a good whirl), they will be perfect every time and much less effort than with Windex.
But then they dont have any lubricant in them
@@DannyGruesome That is also the case with Windex (its also a degreaser), I personally run my bearings without grease, but I apply some drops of chain/sewing machine oil!
@@polaria.coronel-gt2762 i guess if theyve made it far enough to need a windex job and still go for a month or two after that its worth it, with or without lube lol
Brake cleaner destroys paint and urethane. Not advisable. WD-40 works best for cleaning/degreasing.
Xqc is a great skater, very out of practice tho, he showed a bunch of old tapes of him skating on stream
I just did my first proper Ollie
Bro microwaving your shoes is wild 😂😂😂😂
Your def a new skater
@@Brody005 don’t know what made you say that but sure okay 👌
@@mopar_keys how do you not know about microwaving shoes before watching this
@@Brody005microwaving the shoes can ruin the adhesive used for the soles
@@hospitalheel at least I won’t be getting bruises on my heels trying to break them in normally
You already know; hypes for a skate or die vid
Freezing your wheels is the reason that causes flat spots over time. Every since i dont put my wheels inside the freezer i dont ever get flat spots anymore and i already had a few pairs of new set of wheels to prove that logic point.
Shoe goo CAN fix a hole in the sole of the shoe... got to let it dry for 24-48 hours or the griptape will destroy it immediately. And it doesnt grip the ground very well if at all depending on the surface you're skating.
i could swear that the wheels in the freezer thing is from rodney mullen.
I found olmost new it was Indy hollow trucks with Indy hardware with spitfire formula 4 comicals with ceramics Berrigns for 20 $
if anyone tryna clean their bearings you can you acetone too it works really well
Dudes featherin' it like herk with their laces.
Fr bro you are the best at info abt skateboarding
4:45 Jamie Foy's bearing trick with the Windex rinse? It's a prank! 😆 Jamie Foy rides Tungsten-coated, Bronson RAWS! If you ride un-coated steel bearings without a couple drops of Bones Speed Cream? You WILL prematurely wear out your bearings for no good reason.
that gerrett ginner roast is gnarly
These are good skate hacks! Thanks for making this video!
they also use beeswax and oil to make it slick for street
i like the ao shout out on silence
Repost ??
The windexthing is cool .. I use degreser spray tho it works better. .. NEVER USE DW D40 on ur bearings!!!
yes
4:28 he started rapping
ShoeGoo and Super glue definitely work on laces… but, when skate shoes were iconic. Unless you have pair “Eś Koston” which you shouldn’t even skate in at this point, it’s cheaper to just buy new shoes! LoL
It is absolutely not cheaper to buy new shoes. A $5 bottle of shoe goo literally lasts longer than a $60 pair of shoes.🤣😭
_"Cariuma isn't a real skate shoe brand because they do brass eyelets..."_
Not even playing Devil's Advocate for Cariuma but, Vans Authentics since their conception until this day do brass eyelets by default.
⚠️WARNING do not microwave half cabs they have metal in them⚠️
"try to avoid those [head injuries] at all costs! [I am not gonna mention wearing a helmet though]"
just wear a goddamn helmet, it looks super cool and even better whenever you bonk your head on the concrete and stand right up smiling at your friends who are glad you are wearing it.
Unless you're skating flatground then take that shit off☠️ @AndyAnderson
I do have a better thing to do for the wax. Me and my mates spend 3 british pounds on a massive candle idk how much I weighs but its big.
Good video, Don't be a groupie! 😎
This might be funny for y’all but, I skated when I was 3 through 6 Years old, of course no tricks (goofy), then when I was a teenager and I started skating I only could do regular tricks, so idk if I’m a switch pro or what lol
When bro got hit by that truck I was dying
It work on the bearings
buy candle wax then melt it a mix it with cooking oil itll make it really slippery
I don't work out I work out by skating 💪
I don't breathe u inhale air through my nostrils and then exhale through my nostrils
Wow been a while since ive seen one of your vids.
I know local Joe!!!
Feels like the windex trick is put here by guys wanting to sell more ball-bearings. Since u dont mention it, let me: This is a great way to dissolve any lubricant in the bearing. And yeah, they will be faster. Until you have used them for 12 hours and then they will be busted. They might spin badly or not at all.
So use this trick to bust your bearings real fast.
That said, remember to grease those bearings up again, then this tip is fine.
Quite funny with the morgan and morgan ad; cause if one of your bearings seizes at the right moment, I guess the probability you will get hit badly by a car is higher, and that shit is m&m's bread and butter...
Dry bearings are fine. Been doing it 30+ years. Just spray them with WD-40 to degrease them.
Saying you getting right to the video and then doing an add is CRAZY
5:20 Will you need to put lube in your bearings if you do this
Idk
Rip City is the best
I always blow out the ball of my right shoe first
Use a torch or heat gun to make duct tape stick better
Jamie Fiy is the man ! That said please don’t put windex on your bearings. I’m not trying to be a dick, but I’ve skated all my life and I fix airplanes ✈️ for a living.
If you are going to use Windex to clean your wheels and bearings, please apply some type of grease or speed cream afterwards because all you were doing is cleaning off the lubrication that was on it and the dirt. Therefore the bearings are metal to metal and that’s why they’re going faster but you’re wearing the shit out of them.
That’s fine if you’re sponsored, no disrespect to Jamie but I am not sponsored 😂.
You can use Windex but just know bearings last longest and are meant to have a thin layer of grease (speed cream is grease ) plain old high temp wheel grease out of a auto zone will do just as fine as any of the expensive stuff.
Ceramics I can’t say , I’d just follow the instructions that come with them. They are there for a reason. 😂
All respect 🫡 to Jamie Foy for being one rad MOFO !
Using washers and spacers is more important to bearing longevity.
I have a set of old Russian bearings that are about 30 years old. Been running them dry the whole time. I spray them out with WD-40 every 2 months.
Also, speed cream is light mineral oil not grease.
Put your bearings in paint thinner. They will scream after.
I used the winded one and it murdered my bearings bro
Apparently using rubbing alcohol is the way to go. Bones even sells a bottle that you can put bearings in, spin it
WD-40 for degreasing/cleaning.
It was RODNEY MULLEN that invented wheel freezing.
dam i wish my parents knew about shoe goo
2:45 在我国內这双切尔西登台是少不了的
Exploding microwave🔥🔥🔥🔥🔥🔥🔥🤙🤙🤙🤙💀
Hi
7:45 me
Udder
😂😭💀
I'm gonna use superglue
im pretty sure the whole wheel thing was found out by mullen
It's not true.
@@vorpalblades ive heard others say it that sheckler learned it from mullen if i remember correctly, either way not a big deal
I should have been more clear. I meant freezing urethane does nothing to change the durability.
@@vorpalblades how are u so sure? i have no idea but something like softness/hardness. i have 0 idea or care but just a thought
Repost
Bros help me out ion have a microwave or a new pair of shoes
Steal
Don't know what to write
😂😂😂 dude trump (get him outta here )
That microwave thing is the most cringiest thing in the world. Just wear the shoes a week prior… it ain’t hard lmao
First
Technically you're third
this mf got sponsored by a law firm?!?!? 😂😂😂
You sound like you’re reading.
Illiterate envy
If you can't break in your shoes without microwaving them you're a lame and I'll focus your board every time i see you
2023 and people still skate? get a life
2023 and people still think their opinion means shit? Get a life
Is this satire
Bros probably a scooter kid
bros prob cant stand on one
Why don't people say this about like fishing? Or sports?🤣 It's the same thing.
ise candle not waks