Thanks. Came across this video again. Went to look at Axminster and they seem to have stopped selling it. Strange after such a short period of time. Hope it is still providing doing well.
Thanks for the video. I'm thinking about buying one myself, but as I am in a very small shop, I would only be using this for larger cuts and would be taking it off and on. Please consider making a short video on how easy it it to use the table saw with out it, then install the unit so you can use the slide. Thanks
You do have to spend some time setting the saw up... blade, fence, etc. But once done, the saw is great. Fairly compact which is Nice th-cam.com/users/postUgkxXh-4_3-ZT1fFWP91ZV7iVqzElr0lEb-a I did get an Incra Miter Gauge which takes some setup as well. The stock miter gauge can be adjusted in the miter slot with a little painter's tape... this tightens up the side to side play a lot.
I just bought the Harvey version of this to go on my saw. I have the one with that TIn top. Have not set it up yet. I bought it without fence and rails and am installing the Incra LS complete system also with router lift. My plan is to build my own extension table with becomes the work bench so it will become way longer. I'm aiming at something similar to what Dennis did on his Hooked on Wood channel. He's done some excellent work in this area. I'm using this set up for finer intricate work and will use my Felder Sliding table Saw for breaking boards down etc. Harvey Woodworking I have to say have been great to work with. Also worth getting their dust collecting blade guard. It cost less than half the cost of the Felder and is absolutely equal to it. Good video and good luck with your channel.
I’ve seen that saw with the gold top! It looks awesome, bet you’ll enjoy using that! Good luck with the extension table workbench, that’s a great idea. Thanks for watching 👍
I have had the harvey extension table for a few months now, and I got the 90° very accurate when I first set it up. I went to make some angled cuts on it, and the stop to put it back to 90° has some play in it, so I have to spend some more time to get it back to 90°. Hight quality overall still some play in the stops.
Why does everyone make the shorter accessory extension flush with the main slider? If you don’t do reverse miters, it seems like wasted support behind the fence IMHO. I have mine 4” forward.
Harvey is amazing I have the table saw and the sliding table. I also have the larger dust collection which is a big improvement. The problem I have with the fence miter gauge is when you slide the stop into the end of the extension it doesn’t lineup and it’s really hard to get the stop in to the very end of the extension piece. I had to file it and manipulate it to get it to fit Harvey said they were going to address it six months ago. You just reminded me to give them a call and see if they fix that flaw. I’m curious ,slide that stop in and out of the extended arm on the miter gauge and let me know if you have trouble lining it up thanks for the video and I still love Harvey even though there was a slight flaw
You mentioned that all the parts are metal,is the metal gold? I just checked the price:£1500.00!Woodworking is an expensive hobby. I hope Axminster provided you with a good deal on this item. They know you’ll showcase this product to its full potential and many of us tool freaks will drool over it. Clever buggers.
Yes it definitely does. You're exactly right, when using the sliding table you stand to the left, it helps you see the blade and if there is kickback, it won't kit you.
![MV วิถีชีวิตใต้ - ผา อัยย๊ะ [Official MV HD]](http://i.ytimg.com/vi/nODlkOUu9B0/mqdefault.jpg)
Thanks. Came across this video again. Went to look at Axminster and they seem to have stopped selling it. Strange after such a short period of time. Hope it is still providing doing well.
Thanks for the video. I'm thinking about buying one myself, but as I am in a very small shop, I would only be using this for larger cuts and would be taking it off and on. Please consider making a short video on how easy it it to use the table saw with out it, then install the unit so you can use the slide. Thanks
You do have to spend some time setting the saw up... blade, fence, etc. But once done, the saw is great. Fairly compact which is Nice th-cam.com/users/postUgkxXh-4_3-ZT1fFWP91ZV7iVqzElr0lEb-a I did get an Incra Miter Gauge which takes some setup as well. The stock miter gauge can be adjusted in the miter slot with a little painter's tape... this tightens up the side to side play a lot.
Axminster and Harvey! My Lord. I wish Axminster was more accessible here in the states
Hey mate, I think Axminster ships internationally. Probably shipping costs a lot more, but I don't know.
@@SeanEvelegh I am looking into it now
Super informative as always! Thanks Sean!
Thanks a lot Jack!
I just bought the Harvey version of this to go on my saw. I have the one with that TIn top. Have not set it up yet. I bought it without fence and rails and am installing the Incra LS complete system also with router lift. My plan is to build my own extension table with becomes the work bench so it will become way longer. I'm aiming at something similar to what Dennis did on his Hooked on Wood channel. He's done some excellent work in this area. I'm using this set up for finer intricate work and will use my Felder Sliding table Saw for breaking boards down etc. Harvey Woodworking I have to say have been great to work with. Also worth getting their dust collecting blade guard. It cost less than half the cost of the Felder and is absolutely equal to it. Good video and good luck with your channel.
I’ve seen that saw with the gold top! It looks awesome, bet you’ll enjoy using that! Good luck with the extension table workbench, that’s a great idea. Thanks for watching 👍
I have had the harvey extension table for a few months now, and I got the 90° very accurate when I first set it up. I went to make some angled cuts on it, and the stop to put it back to 90° has some play in it, so I have to spend some more time to get it back to 90°. Hight quality overall still some play in the stops.
Hey Chris, I know what you mean. I ways keep a square next to the saw, so I can quickly check/ adjust when I need to
Where can I buy the black sliding table? Is there a link?
Looks good!
Does the fence come on and off quickley , and sliding table lock solid for ripping with the table saw ?
Why does everyone make the shorter accessory extension flush with the main slider? If you don’t do reverse miters, it seems like wasted support behind the fence IMHO. I have mine 4” forward.
Harvey is amazing I have the table saw and the sliding table. I also have the larger dust collection which is a big improvement. The problem I have with the fence miter gauge is when you slide the stop into the end of the extension it doesn’t lineup and it’s really hard to get the stop in to the very end of the extension piece. I had to file it and manipulate it to get it to fit Harvey said they were going to address it six months ago. You just reminded me to give them a call and see if they fix that flaw. I’m curious ,slide that stop in and out of the extended arm on the miter gauge and let me know if you have trouble lining it up thanks for the video and I still love Harvey even though there was a slight flaw
Hi Ray, yes this happens to mine. Good idea to file that section! I’m jealous of the dust collection you have, it looks great!
You mentioned that all the parts are metal,is the metal gold? I just checked the price:£1500.00!Woodworking is an expensive hobby. I hope Axminster provided you with a good deal on this item. They know you’ll showcase this product to its full potential and many of us tool freaks will drool over it. Clever buggers.
Ahaha lie Nielsen needs to start making gold tools, wonder how well they do 😂. Axminster are great to work with 👌
Hey great vid! How rigid are the stops? Do they deflect or are they solid?
Yeah are very solid. Far better than the first sliding table I got.
So no deflection flex at all? @@SeanEvelegh
@@huddleshuddles7360 yes no deflection
@@SeanEvelegh Thank you
Sexy bit of kit. Wish I had the space and money for such a high end product.
Thank you John!
Will it work on a Laguna Fusion III table saw?
How can I get this tools, please let me know link
Has anyone come up with a good way of storing the miter gauge when you take it off?
i need this. from where?
Does this make it safer to use? I notice you're no longer in direct line of a kickback if you're further off to the left as you cut!
Yes it definitely does. You're exactly right, when using the sliding table you stand to the left, it helps you see the blade and if there is kickback, it won't kit you.
What method did you use to set it to 90 degrees?
I use the indexing stop. But I always keep a square next to the saw, so I can check/adjust the fence when I need
That’s pretty awesome! But it cost the same as my Dewalt 10” table saw + Dewalt 13” planer + triton router. Lol
Yes it's true, this his for next level of table saws, not portable but stationary and solid table saws, more precision and quality cuts.
Just gone to take a look at this on the website and its no longer available. gutted
For the price of this extension you could have a proper panel saw with an extension included. It does not make any sense to buy it separately.