ฝัง
- เผยแพร่เมื่อ 8 ก.ย. 2024
- MegaPot 1.2™ is a stainless steel masterpiece available in 8,10, 15, 20 and 30 gallon capacities. Every detail has been thought through to enhance the homebrewing experience. The heart of the kettle is a 4mm thick Tri-Clad bottom- made specifically for even heat distribution. The 1.2 proportion of MegaPot has been scientifically designed to promote a vigorous boil and reduce off-flavors.
Learn more at Northern Brewer:
www.northernbr...
This video explains nothing about what makes this pot the "most" advanced. Seems no different than other major brand names that have a valve and thermometer port.
Well, it DOES have that big "M" on the front of it...
i love that the valve of your HLT so hi that if for some reason your hose fails, it will horribly burn your face. i think i prefer a pump system
What size are these kettles you are using?
I have one of these and its fantastic. Just had my first brew day with it last week and everything with the kettle went very well. I'm a bit rusty after having being on a break from brewing for a while but I get a few under my belt and it will be all good. My only regret was not getting the version with the thermometer.
I think you've had lots of regrets when the WELDLESS fittings begin to leak in the middle of a brew day. Not to mention how the weldless fittings are so flimsy when you try to attach quick disconnects and other accesories. Get a pot with welded fittings and you'll be much happier.
How do you maintain the proper mash temperature while using a gas burner?
Hola me podría decir que altura esta el grifo del fondo de la olla y también a cuanta distancia está el termómetro del grifo y también de que diámetro son ambos agujeros en cm muchas gracias
Hello, could you tell me how high the faucet is from the bottom of the pot and also how far the thermometer is from the faucet and also what diameter are both holes in cm, thank you very much
Does this come with a plug for the thermometer hole if it wasn’t needed …say when doing a brew in bag. I’ve heard the thermometer sensor can snag on the bag when removing it.
I'll be ordering a few very soon!
So, the worlds most advanced brew kettle, is just turkey Booker with a tap.
I think they need to check out the brewha system
Does this come with some kinda electric heating element for the mash and boil?
Why no Teflon tape?
I wonder if this also for stew soup, and will not be a bad idea?
Any chance you could set this on an induction burner to heat the strike water?
What is the best way to maintain temperature in your mashtun? I used mine for the first time last Friday. Maintaining temps was a royal pain. I live in Florida it was in the 70s. So not teens like up north
Matt MacK get a higher end burner
Would it be smart to add some silicon to the outside of the locknuts? help seal it ?
If it were me, I would use high temp RTV and skip the o ring all together.
After 7 month bottom layer is felling off.......
"Most advanced Brew Kettle on the planet", NOT EVEN CLOSE! Weldless fittings are the absolute worst on a brew pot. Once you go with WELDED fittings you will never go with the leaky flimsy welded fittings ever again. Good luck with your weldless fittings when they start to leak with a pot full of hot boiling wort. Been there... done that.
ok then what do recommend?
I honestly don't like this kettle at all. For some reason the ball lock always leaks!
It doesn't look very promising
What a joke lol.