Installing a 30Amp Shore Power Inlet: Part 17 - RAM Promaster 2500 Van Conversion
ฝัง
- เผยแพร่เมื่อ 30 ม.ค. 2025
- Hey Friends, welcome to episode 17 of our RAM Promaster 2500 van build/conversion series. It’s finally time to move towards the electrical system of the van. And we start by installing a 30A shore power inlet, so that we can maximize our electricity intake while at RV parks.
As with many of our projects, we ran into a little problem with this…after not planning the location of the inlet well enough. Not sure how we managed to mess It up, but we did. And we shamefully admit it .
We will take you through all the steps we took in planning and installing the inlet. And if we can do it, YOU can do it .
If you have any questions, please feel free to leave a comment below, and please give a thumbs-up if you enjoyed this video and found in helpful to you. Subscribe to our channel to follow along on our entire van build series.
Blessings to you
Marc and Tania
---------------------------------------------------
Products we used in the episode:
Cordless Makita Drill
2 1/8” hole saw
Metal File
Rustoleum paint
Paint brush or Q-tips
Butyl Tape
10/3 Stranded Outdoor Waterproof Wire
30A Power Inlet
Wire Strippers to handle 10 Gauge Stranded Wire
Philips Head Scredriver
4 Stainless Steel #6 bolts (1 inch long)
8 Stainless Streel #6 Washers
4 Stainless Steel #6 Nuts
And, of course, don’t forget your safety glasses.
PREVIOUS VAN BUILD EPISODES:
Episode 1: Cleaning and Rustproofing: • Cleaning and Rustproof...
Episode 2: Removing the Partition Wall: • Removing Partition Wal...
Episode 3: Soundproofing the Van: • Soundproofing the Van ...
Episode 4: Installing CRL Bunk Windows: • Installing CRL Bunk Wi...
Episode 5: Subfloor (part 1): • Installing the Subfloo...
Episode 6: Subfloor (part 2): • Installing the Subfloo...
Episode 7: Subfloor (part 3): • Installing the Subfloo...
Episode 8: Scopema Swivel Seat Install: • Scopema Swivel Seat In...
Episode 9: Installing a Urethane Window: • How Not to install a U...
Episode 10: Installing a CRL Sliding Door Window: • Installing a CRLSlidin...
Episode 11: Insulating with Havelock Wool: • Insulating with Havelo...
Episode 12: Installing a MaxxAir Fan: • Installing a MaxxAir F...
Episode 13: Framing the Ceiling + Renovating the Headliner: • Framing the Roof and R...
Episode 14: Framing the Walls: • Framing the Walls: Par...
Episode 15: Building Bench Seats: • Building Wheel Boxes: ...
Episode 16: Framing the Shower: • Framing The Shower: Pa...
If you like any of our videos, please consider subscribing. And click the notification n bell to be alerted when we release a new video.
#vanbuild
#vanlife
#campervan
#vanconversion
#homeiswhereyouparkit
#vanlifediaries
#homeonwheels
#projectvanlife
#showerbuild
#wetbathframing