ฝัง
- เผยแพร่เมื่อ 28 มี.ค. 2022
- #4x4 #4wd #Sliders
This Episode is HUGE! Massive upgrade for Coal with a set of custom DIY sliders from DIY Customs! This weld together kit allows you to fully customize the way the slider looks and sits on your 4wd! So glad we went down this route as they turned out exactly like I wanted them!
DIY Customs; discount code
www.diycustoms.com.au/?sca_re...
SUPPORT ROAM LYFE: roamlyfe.com
INSTAGRAM: Roam_Lyfe
- when ordering , diy customs needs to know as much information as possible , including the style / design you want , the length that you require it at.
- also letting people know , that they don’t need to order chassis brackets or gussets , and that the kits without the extra add ons come with 2 lengths of 1500 mm long flat bar to make the brackets, we just make the brackets and gussets for people who want to make it easier. Chassis brackets and gussets are additional costs.
- we freight all over the country , but are limited to only Australia at this time , and to be specific on where they want the items to go
- We are located in Schofields 2762 Sydney NSW - where pickup to the public is available
The best thing the serious customers can do , is be as specific as possible , making it so much quicker for me to give them a quote and Inturn , then ordering the product hassle free
So the standard design kits start at $260 at this point in time
And the step out design ( like yours ) starts at $390
These depend on the size they want , that price isn’t including the chassis brackets
tags: 4wd 4x4 offroad sliders rock guard underbody protection sliding diy customs build series overland patrol Landcruiser jeep Toyota tough do it yourself comp spec bar work barwork custom lift - ยานยนต์และพาหนะ
Our fam really enjoys your vids big fella, no nonsense & aimed at getting it done practically & not crazy expensive. Super nice job on these it suits the vehicle incredibly yeww! 💪✌
I got an engineer mate to draw up the bend I wanted and sent that to my local engineering shop for them to bend it on their CNC bender, then for the notches I used paper templates. I'm anything but an engineer but with this method I was able to build a set in a weekend. Not aware of any kits I could buy in New Zealand so this was the next best option.
Looks killa mate!! Great video explaining too. Most videos just breeze over the smaller details and makes it confusing for a beginner. Legend!
Looks so good. Great work. Yeah I’m with you, I like the angled in tight sliders too. I didn’t go kick outs, and yours came out perfect. Been loving the videos all the way from North Carolina. Keep up the great work. 🍻
Check out Bash Fabrication in the carilinas
Coal is looking awesome and great content you put up also 👌 👍
Even though they are pre fabbed, they must be so satisfying to still weld them yourself. Great concept! If I didn't have a set already I'd do my own. Great vid mate
It’s amazing setting them the way you want! Adds a little custom flare without the expensive equipment!
Watching these videos just make my day better
Thanks mate!!
Glad you went with the 'V' on the back. Was hoping you were going to do it on the front too. Changing up on the fly 👌 Niice!
Dude I love the V hey, looks mint in my opinion!!
They look mean bro! Good choice with the V on the kicker section... stoked u went with the weld ya own setup too. This was a great episode bro... shot for sharing... chur!
Thanks legend!!
Always look forward to seeing your clips...👍🍻
Thanks Scott!!
Another great video keep up the good work buddy!!
Thanks legend!
Cheers mate might pick a set up for my self now.
Yeww!! They are mint dude, set them the way YOU want!!
Funny I the video poped up for me to watch, I just bought a welder and was looking at buying a slider kit. I didn't know these guys were around and they are only up the road from me.
Let’s goooo 🤘🏼 absolute beast of a rig
Yeww 🔥🔥
Brilliant! Don't quite agree with only a couple of hours of welding practice for a beginner, but that's just my opinion. Seeing the PUMA V-11 Air Compressor in the background brought back some memories, I worked for the company that made them for nearly 10 years & chances are I built yours. Awesome GQ!
Oh 100 percent you’re right!
Oh wow, I’d say so!! They are little rigs hey!
😂😂 diesel knocking on the shed door is easily the highlight of this video. Good work mate!
I always watch your videos. U explain it in a financial and realistic situation. With actual solutions. Cheers for all the vids mate
Thanks David I appreciate that mate!!
Good job mate.
A silver marker is handy for working with black steel ;)
Awesome stuff mate keep it up
Thanks Micky!!
Another awesome vid mate
Thanks legend!!
Why was that dog skit so hilarious “see yourself out” 😂😂😂
Hi where did you get the alloy. Wheels ? What size a them and how much for the set or ich one? They are bed locked
Good job mate
hey bro whereabouts did you get your stainless steel snorkel perfect entry
Your dog is class mate! 🤣
Keep up the good content. 👊
Haha he’s so goofy!! 😂
Looks mint mate 👌
Thanks legend!!
All good mate found link on your description derrr..🤙🏽
Brooo they are sick!!
So happy with them 🔥🔥
That's pretty amazing. Checked out the web site. A little disappointed they don't do bull bars and rear bars. Bull bars I get - regulations, but rear bars, with swing out wheel carriers aren't mentioned. Maybe these are coming?
He’s a small business at the moment but is ramping up his work big time, investing in some pretty serious gear! I wouldn’t be surprised if more kits become available soon!
@@RoamLyfe It's a brilliant idea. Imagine the cost of posting an entire assembly vs the cost of some pipes! Brilliant! I wish him well.
Looks sick , are scrub bars to the bullbar and tray coming soon
If it's not too late I recommend getting them sand blasted before painting. With that much welding and tight angles you won't be able to do a proper surface preparation. I would hate to see all that lovely work rust out in 6 months. Cool job, I prefer the slider/step in one but hey this is your ute. I don't do hard core driving and my wife is really short.
Hey mate that looks awesome 👏 if I say so myself great work. Question where can I get one for a 76 series LC mate. Apologies, I know you got a Nissan mate..🤙🏽
Hey mate, where did you get those wheels from?
love the time and effort put into the beast of a rig
Thanks John!!
Not bad sliders i might look into it for my 80
Full send 🔥
Great work. I looked into doing the same but freight to Tassie was 260 bucks making the DIY option more spendy than the ready made units....which I'll mod if needed. Anyhow..well done....again!
Freight is a killer at the moment 😓😓😓
bro, i custom make bars, sliders and trays, im in Hobart Tasmania, i fit for no extra cost, just pay for what ya want done and a additional $80 for time
Absolutely love the videos brother and I hope to get some of these sliders in the future so this video will really help 🤙
Thanks legend!!
Who’d you buy these through?
Sweeeeeeet sliders..👍
Thanks mate!!
Mint!!!! 👌
Thanks mate!
Which company sells these as kits mate.
Mint.
👌
Mint 👍🏼👌
Thanks legend!!
Just emailed the company, What a great Idea.
So good hey! 🤘
Hey bro do you no the price range of these kits ? Great video to
Hey mate check my description!
looks mint moite, where's the grandpa scoop? recon that would set it off
It’s coming haha, bit nervous to tackle that one!
where did you get the unimig 180 ?
I got it online at Sydney tools!! Unimig 182
Ha!
Legit was just about to place my order.
Yeww 🔥🔥
G'day! Looking minto! You don't want to send me the leftovers for my GQ by any chance haha 😂😂😂
He only sent me one side so it’s only one slider haha not even actually
@@RoamLyfe dang, seems like a popular and decent kit! Might be the way to go for my wagon, side steps don't hold up to the abuse..
Yeeeeah buddy!
🤘🤘
oh wow this is really cool ! like your joke edit with the dog ! looks like you've also completely change the layout of your shed ? very spacious ?
good instructional video ! very well done!
Nice work, RAG Customs do a nicer slider kit and cheaper too, DIY Customs stuff is good too
Tom, I think you need a drop saw mate 🤣
Tbh I had mine out and the way the supports needed to be cut was on a 2 axis angle haha so I had to put it in the vice on the angle and then cut a side angle if that makes sense haha!!
Bruz what do ya actually do for a crust 🍞
How good is that welding table mate, so much easier I bet
Dude legit the best thing I’ve built! I’ve never been able to weld standing up hahah 😂😂
That’s fucking sick
Looks mint but that missing bolt in the rear bead locking is getting to me aye 😂
👌👌👌
I just made some and clear painted them
Hey that’s not a bad idea mate!!
I friggin love your videos. Was just looking at replacing my aluminium side steps earlier today and then you uploaded a video! ps Coal is a BEAST!
Also Im 19 and feel so inspired to buy parts for my rn105 hilux just so I can learn how to use a welder!
Thanks mate!! I appreciate the comment 🤘
Glad to hear you’re getting into it early!! 🔥🔥
First and does ur brother come from burpengary in qld as I’m from NSW and I’m sure I seen the brogan bus
Yeah he’s around that area mate!! Probly did see him!
Hahah nice thought it was him
Being of age and how to manage the sequence of returns in those early periods is what seems quite scary in the current market. The market is never a loser in the twenty year cycle, but the 2000s decade scenario scares me and could really disrupt my retirement. When you're no longer accumulating but withdrawing, it's hard to be anything but cautious.
Some investors look to their investments as a source of income while others use it as a means to grow or preserve their wealth.
For now, investors getting started can feel overwhelming. Risk loom large and complicated, unfamiliar financial jargons can be intimidating.
@@stevematthews1105 Apparently that's true, I agree. It is mostly disastrous for newbies or anyone who doesn't adhere to a well thought-out strategy and over all, a professional broker.
@@steceymorgan814 This is absolutely where online professional brokers can come in handy... Those that offer intuitive platforms and plenty of educational resources, and also guide you through your early investing days.
A good broker is much more than a venue to execute trades. Look for a broker that can assist you with quality research and educational materials, to aid your development as an investor and also help you make winning decisions in the market.
Hahahah except some of don't own a welder and I couldn't weld to save myself..........
Yeah I totally get you mate! You can nab a second hand welder for $250 and learn on some scrap before you tried this!! It’s honestly 80 percent settings and 20 percent skill haha 😆
@Roam Lyfe mate, I wanted to do manual arts in High School so I could learn AutoCAD. One of the teachers, a neighbour, BEGGED my parents to make reconsider. I did physics, instead. (Which lead to a love of electronic, computer programming, and, now, robotics.)
Honestly, I think I'm stuck spending money on a Raslarrrrrrrrrr set and brush bars with them. I want the trucks nickname, Brutus, cut into the plate, anyway, like my seat covers have got.
Then I'll get in touch with me new mate who's got his own TH-cam channel to give me a hand installing them..... 🤣🤣🤣🤣
Don’t wanna waste his time just yet but is there a ball park price? Between lile pretty much cheapest to more expensive?
Hey mate check the description of my video!!
you are missing a bolt in the rear left tyre btw
Yeah she snapped when I was tightening it!! I really gotta sort that 😆😓
You need an anti spatter sponsor
Bloody woulda been nice hey 😂😂😂
I had to rewind for the “condom of sliders” line. Ffs 😂
Accurate description.. just took longer to unwrap 😅
DIY is very expensive, I got a quote found a young guy on the gold coast who made me a mint set for less then the DIY kit costs.
Caboo
they defiantly look great and all but they stick out a lot and they'd look a fair bit cooler with some side rails.
the side rails would make coal look beefy and tuff
They are getting tied into the tray aswell as the bullbar!! I want full armour on coal!!
And first
👌👌
Misleading title. You can’t call something DIY when your parts are precut for assembly. DIY means from scratch. Something you build from cutting, grinding etc…
Title is misleading, more like how to weld your pre cut steel 🥴
Could name the video many things but I do try and think of ways to make people click the video!! After all I spend a lot of time creating this content I want people to watch it 🤘! I do try keep everyone happy 😅