Installation of an M99 PRO to a bosch system - english
ฝัง
- เผยแพร่เมื่อ 16 ก.ย. 2024
- How to install a Supernova M99 PRO to a Bosch system generation 1.
More about us and our products you can find on www.supernova-l... or in our webshop shop.supernova-....
Bravo inžinjeri! Sjajan posao! Hvala na ovom veoma veoma korisnom videu.
imagine all of the work designing a light and making it perfect, and then making an installation video and not showing the connectors or describing the cable lengths or what is included with the kit.
This is bullshit, you don't need to remove the whole motor to install the light. I managed to pull through the light cable using the old shifting cable attached to it through the frame without any problem. You just need to take away the motor cover and that's it.
Also why remove the pedal?
HELLO, tell me please what is the name of crank removal tool?! thanks
Wow why so complicated to install a light?
I believe you have to change the output voltage of the motor to suit the light
note folks the new 2021 Supernova M99 PRO E 45 will only work with the older Bosch gen motor and not Gen 04 , also if you decide to have the new Bosch Nyon computer it will overload the motor , in words you cannot have both on Bosch gen 02
Are you talking about the M99 PRO (not the MINI PRO 45)? The PRO draws 32 watts max (in power high beam), and the Gen 4 motor only supports 18 watts for front and rear lights combined. I just ordered the Mini Pro 45 for my Gen 4 line speed, as it only draws 16 watts max. I also bought the M99 tail light with a max 0.9 watt rating.
@@steel6322 Thank you for this info, it helped me to not buy the wrong one!
Dude, your pedal was not on tight enough!