I made Mario and Luigi into Clones
ฝัง
- เผยแพร่เมื่อ 15 มิ.ย. 2024
- That's a fact. You can look it up. But don't bother, cause you know I'm right.
Want to help the channel? / northoftheborder
Want to buy me a ko-fi? ko-fi.com/northoftheborder
Follow me on instagram! / northofthebordercraftw...
And of course, ya'll know I love me my likes and comments, and if you haven't subscribed yet, now is a great time to do it!
_____________________________________________________________________________________________________
Cosclay (my clay of choice)
www.cosclay.com/
Materials -- Full disclosure: I'm an Amazon affiliate, so any of the links you follow here will help support the channel. It doesn't cost you anything, but I get a little kickback for each purchase made through these links (I like to think of it as taking money right out of Jeff Bezos's pocket)!
Usually Used Materials:
UV Resin
(UK) amzn.to/3izI0wg
(USA) amzn.to/3wreX1b
(CAN) amzn.to/3yIxEiG
Mod Podge (Gloss)
(UK) amzn.to/3ta4BBY
(USA) amzn.to/3hTBPRY
(CAN) amzn.to/3khr2Uz
Mod Podge (Matte)
(UK) amzn.to/323CGrE
(USA) amzn.to/3hTBSx8
(CAN) amzn.to/3AS3XO6
Tacky Glue
(UK) amzn.to/3tkK9OQ
(USA) amzn.to/3hT1FoZ
(CAN) amzn.to/3hS6TBC
CA Glue (Super Glue)
(UK) amzn.to/3217k51
(USA) amzn.to/3ANpAin
(CAN) amzn.to/3AR4lMs
Armature Wire
(UK) amzn.to/3s1rHtm
(USA) amzn.to/3yG1zIc
(CAN) amzn.to/3jYxcZs
Clay
(UK) amzn.to/2R5rWXL
(USA) amzn.to/3xw4bIl
(CAN) amzn.to/3hXe7Eo
Translucent Clay
(UK) amzn.to/3ajoM8P
(USA) amzn.to/3ahOURJ
(CAN) amzn.to/3v6NG5r
Paints
(UK) amzn.to/3eLsona
(USA) amzn.to/3r1eemq
(CAN) amzn.to/3hUgWWP
XPS Foam
(UK) amzn.to/3wVh2n7
(USA) amzn.to/2Vu85DF
(CAN) amzn.to/3e6dDL3
My Tools:
Sculpting Tools
(UK) amzn.to/3xw4uD9
(USA) amzn.to/36tQjCO
(CAN) amzn.to/3AMowvd
Silicon Tools
(UK) amzn.to/36vJz7n
(USA) amzn.to/3yD3mh4
(CAN) amzn.to/2UBf3Gy
Stabbing Tools
(UK) amzn.to/36vJLn7
(USA) amzn.to/3r1fJky
(CAN) amzn.to/3r0wdcE
Pasta Maker
(UK) amzn.to/3wABzwd
(USA) amzn.to/3ANETHH
(CAN) amzn.to/3hvhGT0
Airbrush
(UK) amzn.to/3r8wqe0
(USA) amzn.to/3r2w34k
(CAN) amzn.to/3wCxlEI
Airbrush Booth
(UK) amzn.to/3l95Xfi
(USA) amzn.to/3BZfn32
(CAN) amzn.to/3fcCXQ0
Compressor
(UK) amzn.to/3wqIiZK
(USA) amzn.to/3AJKtet
(CAN) amzn.to/3r17jth
My Filming Equipment:
Camera
(UK) amzn.to/3k3LLuL
(USA) amzn.to/3hvhALd
(CAN) amzn.to/3hvi2ZQ
Lens
(UK) amzn.to/3wxJ9YL
(USA) amzn.to/3xAGezU
(CAN) amzn.to/3yK1kvC
Microphone
(UK) amzn.to/3htJqYg
(USA) amzn.to/3e5bGhJ
(CAN) amzn.to/36pvf02
Mount
(UK) amzn.to/3yOnrBn
(USA) amzn.to/3e6tXLQ
(CAN) amzn.to/3xyrqSj
_____________________________________________________________________________________________________
Chapters
00:00 - Little known facts
00:25 - It's a me!
04:16 - Green with fraternal envy
05:42 - Remember Dolly?
06:33 - A tube in two parts
09:45 - Okay fine, I used the airbrush
11:55 - RGB-e-a-utiful!
13:45 - Cloning Vats, ASSEMBLE!
14:15 - Glamour Shots
_____________________________________________________________________________________________________
#supermario #luigi #resin
Some of the Tracks from this video are courtesy of GameChops' Mario & Chill
Support Mario & Chill ~ smarturl.it/mariochill
Mario & Chill explores the rich musical history of the Super Mario video game series through the lens of 80s and 90s electronica. A spiritual successor to our album Zelda & Chill, Synthwave artist Helynt created a progressive and nostalgic tribute to gaming's biggest icon. Licensed compositions courtesy of Nintendo.
Inspired by the era when Mario first hit the scene, Mario & Chill was produced with synthesizers, guitars, and retro drum machines all akin to the era. Created by Helynt, a synth and retrowave artist from Italy, Mario & Chill is a progressive trip through video game music history.
Games featured include Mario Kart, Super Mario World, Mario 64, Mario & Luigi, Mario Galaxy, and Mario Odyssey. Composers include Koji Kondo, Kenta Negata, Satomi Terui, Naoto Kubo, Mahito Yokata, and Yoko Shimomura.
Mario & Chill is available digitally worldwide. It can be streamed on Spotify, Pandora, and Apple Music, and purchased from iTunes, Google Play, Amazon, and more. Limited edition CDs and vinyl are available through GameChops on Bandcamp.
Stream, download or buy Mario & Chill
~ smarturl.it/mariochill - แนวปฏิบัติและการใช้ชีวิต
i would really like to see a realistic luigi's mansion where the ghosts have sunken-in eyes, gaping mouths, and eerie smiles,
and the mansion could look as if it's rotting.
realistic king boo!
-gasp- YES
@@evilqueen6402 exactly!
They could also have realistic googi!
Or make Luigi's mansion into Monster House
There's nothing like seeing Adam plundering the darkest depths of his mind to create horrifying nightmare fuel on a Friday.
You sure he has to search??
Yeah his models are getting progressively darker lol
At 8:00 am
Bro thank you i thought it was Thursday!
"Nightmare Fuel" would either be a great name for a new energy drink or....
The perfect rebranding for Ambien.
This man consistently has the time to both freak me out and create the most bizarre and oddly fascinating clay sculptures that leave me thinking “Damn that’s impressive!”
Keep up the great work Adam!
Yes
You could do the resin pour in 2 parts to avoid the visible rod. Hang them from a string into the tube and fill it halfway. Then let it cure, remove string and pour the rest of the resin ^^
I'm not sure if it's less or _more_ horrifying that they're *_fully clothed while in the vats_* ??? Are the clothes grown with them? Are they clothed and then put back into the vats?
Also, the rods to keep them up look like clear umbilical cords.
Clothes are organic, all skin tissue, just different pigmentation : )
@@AppleInk Eew 😂
@@AppleInk thanks for the nightmares
@@AppleInk I absolutely hate having that image in my head. Thank you.
@@AppleInk u g h
Sometimes I refuse to believe Adam is human with all the detail he puts in.
Are you human, or are you a clone?!
He's a clone for sure.
Robot man
@@toadtime-4206 hes an alien thats lived millions of years thats why hes so good
Yes.
@@thefitness-grampacertest9364 The FitnessGram PACER Test is a multistage aerobic capacity test that progressively gets more difficult as it continues. The test is used to measure a student's aerobic capacity as part of the FitnessGram assessment. Students run back and forth as many times as they can, each lap signaled by a beep sound.
You know what might be a cool idea if you ever make something similar with different characters? Maybe to “hide” (aka implement them into the scene) the acrylic rods they’re mounted on inside the cloning chamber, you could maybe attach them to the characters in way that makes it seem like they’re meant to function as umbilical cords essentially. Like they’re what’s providing the supplements to keep the clones alive while waiting to be activated
I love these! Always wondered how the extra life thing would work in reality. With other characters being playable you could make other clones in resin and swap out the top and bottom. It would be cool to see Toad, Peach, Daisy, or Yoshi in one.
Does this mean that Wario and Waluigi are failed clones, cast aside by whatever higher beings are in charge of the cloning? Is this why they hate Mario and Luigi, because their successes are constant reminders of their own flawed existence??
I NEED ANSWERS.
If I remember right, Wario is Mario and Luigi's evil cousin. No one knows where Waluigi comes from. I just showed up one day with Wario and everyone just accepted it.
I need to see these failed clones.
Yes, the answer is yes.
@@NorthoftheBorder wario and waluigi can respawn so there must be many failed clones. A legion of warios and waluigis that live together and breed together
@@burgr293 waaaaaaaaa
The concept of clone devices is mind blowing kinda makes sense how Mario respawns again. Would love to see a realistic castle from Super Mario 64 with a creepy chomp or bullet bill aswell.
@Ova Milya your parents had you for tax benefits
Yes I totally agree, I'v just decided this is now canon. Also there great ideas.
I feel like the infamous piano is just begging for a sculpture with an unsettling amount of detail.
"It's me *A* Mario. For I am one of many!"
I mean they get bigger by shrooms. There is nothing realistic in this universe
Really like these, wish I could perchase them. This is just one of those things that you would have on your shelf and when you have company they would be like, "why are they in tubes?" And then you explain they're clones. Really cool conversation pieces
This guy comes up with some sculptures that belong to the "this pic goes hard, feel free to screenshot" meme. You are a very talented artist, I must say.
by this logic surely you could splice their genes to have mario/luigi mewtwo hybrids, and now i want this
That’s horrifying…………….. I also want to see that
With enough up votes I'm sure we can make it happen. Right?
@@jonathan__g yep
WRITE THAT DOWN, WRITE THAT DOWN!
The
Super
Mario
Bro
Oohay
Part of me is like "I hope Adam returns to making sincere sculptures like those Zelda pieces" but the other part of me is like "I should suggest realistic Banjo-Kazooie" so I guess I'm saying I'm gonna watch every video regardless lol
i miss the book nooks and beautiful zelda sculptures but i agree, i’m watching either way because it’s still incredibly entertaining
... THE GAME OVER MACHINE. He should absolutely do the game over machine. Perfect excuse to do both versions of Tootie and Grunty. Lighting effects, the minion, bolts.
On one hand: I hate this
On the other hand: Chaos, yes.
Third hand: Banjo and Kazooie as an actual bear and bird would be adorable tbh. Of course this man could make anything terrifying and I therefore would literally never trust him to do it lmao
I love how round they look in the clone tubes, they look cute to me ^^
The details on the metal parts looks great! Especially the greebles~
This is honestly the first thing adam made that actually terrified me. Not because of Mario and Luigi. It's the thought that they're in resin. Like I can't help but think about how horrorfying it must be to be stuck in resin. Imagine you're in that tube, somehow alive and aware that you're unable to ever get out, you're permanently stuck in a thick layer of skin tight, hardened resin. That terrifies me to my core. Well done Adam :D
Mario and Luigi being fully clothed while in the cloning tanks implies that the clothes are not clothes but in fact parts of their bodies
What, did you think they were sewing new outfits every time? With this state of the art mushroom powered cloning technology? Not a chance!
@@NorthoftheBorder They could put the clothes in first and make them grow into them
With the horrifying trends most of these recent sculptures have been following, I would absolutely love to see you re-create some Kirby final bosses (specifically the one from Forgotten Land).
yes yes yes yes yes
YES
I love that this adds an interesting sci-fi spin to something that's probably never been associated with sci-fi.
Your mind truly works in mysterious ways. This is awesome!
Man its really satisfying to watch this kind of videos where people make cool projects out of clay
UGH! I hate it when bugs and dirt get in my cloning chamber. It's so inconvenient and then I have to safely transport the clones into another chamber so it can be cleaned. Once that is done I can put them back in. Sometimes though, the clones wake up not fully formed and then I must dispose of the deformed monstrosities by using fire. Anyway... how are you?
I think the original lore says that bugs and dirt contamination is what happened to birth Wario and Waluigi.
@@NorthoftheBorder I'm pretty sure those chambers were laced with meth and steroids as well (giving mario the muscle and luigi the even slender-like body)
One of my favorite creations you’ve done. The detailing is impeccable. The grimy, metallic, color-choices and shading along with the stone-gray tiles give it an industrial look that just adds to the creepiness.
As for Mario and Luigi, it looks as if you’ve plucked them straight from the games. Well done!
Day 2 of asking for the purple minion
Seeing the final product gave me an idea. You could have made breathing masks for them and attached the acrylic rods somewhere above their heads and put them in the resin upside down. Then the rods would look like air tubes for the masks.
Since you’ve done realistic video game characters, it would be great to see a realistic Wreck-it-Ralph and Fix-it-Felix from the video game movie, Wreck-It-Ralph.
Oh god he’s going to do something horrifying I can already tell 😱😱😱
that would be so cool
And Calhoun (I think that’s her name lol)
I'll be honest, your works are often a bit too nightmarish for me, but I love this one! It hits that nice sweet spot between goofy nonsense and Halloween horror.
I love the creative details that you add to your designs. Even the little creative things, like hooking up that tubing to the vats, just adds so much to the overall sculpture.
And also, the highlights/dark patches that you add in all of your designs really make the sculptures pop. When you added that umber wash to the dirt made the dirt look so good and detailed.
Adam literally makes the most nightmare inducing things with clay and I am all for it.
Hey instead of that clear tube that holds them up, could you suspend them with a string while pouring half the resin, then let that cure, remove the string, and pour the other half once they're set. Or would it leave a weird halfway mark in the resin?
It wouldn't leave a mark !
The main risk is that the figures would move during the curing process. Either from the string rotating, or the figures wanting to stay afloat for some reason (i.e. if the resin is very dense)
I was thinking he could have brushed the clear tubes with UV, and it might have made it more clear?
@peter youtube vulture
he can leave the string if he uses fishing wire. it disappears as well
Ya, two stage pouring would work but this resin takes 72 hours to cure, so I could pour the second layer at around 30 hours or so, then I'd have another 72 hours to wait and I'd run out of week! Definintely an idea if I'm doing it over several weeks, but in a few days I usually need to do everything in a single pour (which is why so many resin adventures go awry).
This turned out so cool!! Even better than I imagined from the Patreon hints! Now question is, are the original Mario and Luigi kept hidden somewhere for dna and future cloning purposes, or were they really the first to go and a dna just went really really well to create the clones?
The real Mario and Luigi were killed during the first raid King Koopa ever did on The Mushroom Kingdom, but since they were the only two people at the time who gained special abilities from items found throughout the kingdom, the royal family decided to preserve their corpses in cryo chambers and cover up most of that incident.
They extract DNA from the sources each time a clone dies, infuse it with some of the clone's DNA along with properties from the items they found, so that each time they produce a new clone they are capable of learning new abilities.
The only side effect of that is there is a small chance of the new clone dying doing the exact same stupid maneuver that killed the previous clone.
Might explain why Mario and Luigi are so limited in their speech, and also why they haven't seemed to age in 30+ years
@@Jadebones wario and waluigi were the first clones, thats why they look older and scrunglier
@@Jadebones oh my god, unus anus pfp? I actually have those figurines!
@@Kevinblue035 and why they don’t look exactly like M and L
This woulda been amazing with a dimmer but still bright LED setup of both on top and bottom to be used like a nice nightstand light or night light.
Really excited to see the first ever part 2 with anything made on the channel and possibly who’s cloning the mario bros. Could it be evil clones from someone we wouldn’t expect?
I really enjoy and appreciate horrific thought of this, and the comments adding more to it.
Just amazing also I love the commentary and editing! Keep up the amazing work man
Also this fuels my obsession with Mario and Mario games right now so yeah
Dang I never thought of it like that truly thought provoking imagine how many clones have existed probably millions
this reminded me it was friday
Oooh, I love my childhood nightmares being recreated with clay! It really is quite beautiful.
Other than the fact that the Mario Bros are now like preserved foetuses, I really appreciated the detail that went into making the cloning vats.
You never fail to impress me with your nightmarish creations.
Keep up the **good** work!
The amount of detail he puts in is mind blowing
Mario and Luigi being clones makes a lot of sense on why they are respawned from their deaths. Time to buy some Duracells for life support.
It's been blowing me away just how crisp, clean, detailed, and amazing your figurines look. With each video your talent seems to improve, and I know you like to joke saying you don't know what you're doing but I gotta say you are an absolutely incredibly talented sculptor!
“The dirt will be painted so it looks like dirt” truly inspiring words north
Amazing work, as always! Thank you so much. I absolutely LOVE the idea that somewhere in Mushroom Kingdom there is a Clone facility filled with the collection of 1UPs you have found.
Awesome little sculptures as always!
I was wondering, is there a reason you use Cos Clay over something like Sculpey or Fimo? I've often thought about trying my hand at some clay sculpting and wondered what the best clay to use would be.
Cosclay is a rubber polymer and it's very durable/flexible when baked. I am clumsy and drop/bang/knock/or otherwise demolish a lot of things while I'm working on them, so something more Adam-friendly is ideal.
@@NorthoftheBorder Ah, gotcha. Thank you for the reply and keep up the great sculpts/videos!
@@NorthoftheBorder Looking at their website I see soft, medium firm, and extra firm under the Sculpt category. Which do you recommend?
@@davidcbeaudoin probably medium firm, I would think
I've never been able to tell Mario and Luigi apart, but with your pro tips, I think I might be able to learn! Thanks, Adam!
Nintendo: now go out there and say it like we practiced
Mario: it’s a me! Mario! Number 4,73- number 1!
You should make an infinity mirror set up for them so it looks like there are millions of them ready to be thrown into the game.
Dude. You’re a prophet.
I loved this idea… and he actually did it!! Nice one.
I was scrolling through the comments just to see this one ☝️
I really love all of your work but the clones have to be my favourites! I taught my boys about gaming using Mario and Luigi back in the 80s...so many happy memories! xxx
Very cool. Reminds me of VENTURE BROTHERS.
You know what would be really cool? A realistic version of Plants vs. Zombies. Like a peashooter shooting at a cone head would look super cool
I'm so used to horrific, way too detailed things that I can't believe Adam made them with smooth skin lmao
Also I never realized how BIG their noses are lol
When Adam makes these creatures or people on your break, weekend, or even a friday like this he talks about a dark past or completely changes your point of view on the character that you thought you knew so well. Thank you Adam for putting your tim and effort into these tiny creations. You did quite well on this one❤❤🐣
The only thing you missed is some kind of breathing tube for them. Otherwise this is absolutely amazing! I love it :D
Dude, these are the coolest things I have ever seen. Nintendo’s brand and Mario’s brand/ journeys are some of my fav things in the world. Personally, due to your perfect job, I think you should make more Mario or Nintendo related things.it would be AMAZING & INSPIRING! thanks for the vid
Love these, a room full of Mario brother cloning vats would look amazing!
The prophecy is true
Kevin spoke his Word and then there Was.
All hail the oracle
Tbh I think the realistic Lego man is the most unnerving and unsettling creation on this channel. Even more so than his other realistic fictional characters.
Do a video showing your collection of sculptures, that would be nice
It’s so satisfying to just see the clay be molded and all
Adam, I honestly thought you had seen a comic where toad asks mario why he always says "It's a-me, mario!" And mario shows that he is merely a singular mario in an endless sea of marios.
@Ova Milya shut up
This is so creative, with such beautiful craftsmanship 🤩 You inspire me to get back into crafting, thank you for making these videos 🥰❤
Baking clay is like saving in a game.
I think the most horrifying thing here is the idea that their clothes are part of their bodies…
I love this Mario series so much!! I got a few ideas for you. How about the Koopalings? You can change Ludwig’s hair into a frill, make Morton’s star-eye have a scar instead, and instead of making Roy pink just “because he’s pink” he could be albino. Anyway, if you don’t see this or have the time to do it, those are just my thoughts. Keep up the amazing work!!
Come to think about it, it makes sense. How could you just revive from a mushroom? The mushroom must power the cloning machines, like Adam said. Yoshi doesn’t get 1UP mushrooms, and he doesn’t get cloned.
kirby's 1ups just give him the proper nutrients for him to perform mitosis
“um actually, you can see that the mushrooms really do revive mario in the mario and luigi games” -🤓
I need one of these. Invite the family over and it’s a great conversation starter for dinner
Always a good day when we get a new north of the border video, these turned out sick!! I commend you for your attention to detail.
The lights help so much bringing the right cloning atmosphere, as always beautiful builds. I do like the mechanical look of the cloning tubes, but I have to say most of the horrifying builds are nicer
This channel feels like the prime example of “Oh sweet, man-made horrors beyond my comprehension”
Just imagining seeing thousands of Mario and Luigi clones.
9:49 Nooo! It should’ve been green AND red! There’s red mushrooms, so Mario could have his own! Truly missed opportunity.
Am I the only one seeing the rod holding the mario bros up as a feeding tube
That intro was weird
Can definitely agree with that.
Luigi's number one in everyone's hearts
Realistic Donkey Kong? Realistic dog from Duckhunter? A Frogger that didn't make it? The walking egg from Burger Time?
I love how this implies the bros’ clothes are *PART OF THEIR BODIES*
The creative little transitions you do between certain steps are the most clever & entertaining I've ever seen in a craft channel, bravo.
Not grotesquely horrifying, but still eerie and spooky in its own way. These guys are sincerely very cool!
The detail on the vats is incredible!
this could be a literal serial killer sentence 0:50
I love how closey they relate to the mid 90's Nintendo power mario promotional stuff. Like how they uses to have the stop motion style pictures
i have to admit that my favorite detail about this is the mushroom patch on top of the cloning tanks. the whole thing is amazingly creative but its that one little bit that does it for me.
I love how your hands are like humongous compared to some of your workings yet you never accidentally crush any part of it, I do that all the time and I have baby hands dude!
Adam, please! Please make Shin Godzilla! I want to see how good you could do it. You've been making lots of tiny-scary-things recently, and with Shin Godzilla being a giant-scary-thing, I think you could make it really cool! Either way, I love watching your videos, and am looking forward to more tiny, possibly scary, but definitely nerdy things!
I'm getting major 1993 Mario movie vibes from the chambers. Would love to see you do more with this idea!
So freaky weird and cool ! 🤘
It’s kinda scary how close the Mario design was to the movie design
The fact you can make all these amazing sculptures while having such a tight schedule/time limit on when they need to be finished by while also having a life is just baffling to me. I love your vids man keep up the good work!
I LOVE the detail on the vats. Probably my fav video of yours yet.
These videos are my favorite part of Friday.
If Mario and Luigi are cloned… does that mean Toad is grown from spores? 🤔 Hmmm…
Awesome job, Adam!!! 👍🏻👍🏻👍🏻❤️❤️❤️
This is pretty cool.
AMAZING WORK! Very imaginative!
That is so cool. The details and paint job are on point.
This is such an awesome headcanon…also these Mario and Luigi clones are awesome! And I love your sense of humor, it’s also awesome! Everything is awesome, just like they said in the Lego Movie.
I love the specifically vague descriptions
Your attention to detail is AMAZING 🤩
This is the best clay channel. Well not just clay. DIY, the best one. Rare you see so many channels. The best!
It looks _awesome_ and I love how you edit the glamour shots to fit the beats of the music.
5:41
I was expecting you to then suddenly smash the plank of plastic and i just started laughing historically 😂
0:30 I freaking couldn't agree more! WAAAAAAAAAAAH!!!! Def my favorite Nintendo character!
Now whenever I think of Mario I think of north of the borders realistic Mario
I bet you could make support rods out of resin that would then disappear fully. Either that, or pouring in stages