I have not used S&B 150 x 4 In Worldtech 4091.4 Analogue 130 x 4 is superb Amplifier. 4099.4 compact Digital is Also Good Amplifier But Personally I Likes 4091.4 Analogue more I have sold 4099.4 and 4091.4 almost 50 units all customers are Satisfied you can check my channel's Community Section.
Digital Amplifier - Low power Consumption for High Quality Output in limit, Recieve Digital Signal Convert it to analogue Output , Less Heating, Small Circuit. Analogue Amplifier - Amplifies Analogue Audio Signal To Analogue Output (No Audio Signal Conversion), Bigger Circuit, Heating Is Present, Need good power Supply, Personally I Like Analogue Amplifiers More Because it is our Will To Set It's Output Levels Loud or Quality. Analogue Amplifiers Can Go louder than Digital. And I am using Analogue Amps from 12+ years Easy To repair Sound quality we can set as per our Requirement. Audio Output of 4091.4 is crystal Clear I have not used Amp like that before.
@@rastogi.abhishek11 single channel par 2 ohm par chalega ya phir Series kar ke 8 ohm par bridge mode par chalega Ya phir D2 Subwoofer Ho (Dual Coils 2 Ohm Each)
Worldtech WT-4099.4 Is Far Better For Example Supply Side Of S&B 806g have 8 pieces Z48N MOSFET Total wattage of Supply Side Is 140Watts X 8 = 1,120W (Z48N= 140Watts Per Piece) Where else In WT-4099.4 Supply Side Have 6 IRF3205 Mosfets Total Wattage Of Supply Side 200Watts X 6 = 1,200Waats (IRF3205= 200Waats Per Piece) S&B 806g Is Analog Amplifier WT-4099.4 is Digital Amplifier which is Rare. High Quality Components & Crystal Clear Sound Quality.
@@prateeknagar147 even many mono amplifiers don't have 1200 Watts Supply section & Matching of supply and output section's watts is also very Important. Many amplifiers have 600 Watts Supply section but only 400 Waats Output section
@@AHC20 i have previously used worldtech mono but didn't had a good experience that's y was confused in this and 806g, since i m getting both at similar price.
@@prateeknagar147 in terms of 4 Channel Worldtech is best in Less known Brands But They need to work on mono amplifiers Supply & Output Watts Mismatch is present otherwise Body, PCB, Bass Knob, Components Top knotch supply & Output section Mosfets needs to get improved I have talked to Them For Same I hope they will work on it to Stay In Competition.
I have been using this amplifier at home more than two weeks, as heavy 2.1 channel sound system, with power unit from Divyansh, @AHC. This ampplier gives a cristal clear sound on each chaneeal and heavy punch bass on the bridge mode with Subwoofer. Not only in car we can use at home as well. I had a big hall around 30 feet of length and just 30% of volue is more than enough and can't bare more than that sound. No sound distraction and humming at high volume sound. Divyansh will guide you for amp setup and if you have any queries.
![PASULOL รามเกียรติ์ ตอนที่ 4 นนทกพบรัก [Ramakien Ep.4: Nonthok in love]](http://i.ytimg.com/vi/tMUQgmZzf_A/mqdefault.jpg)
Good
Apki videos k to fan ho😊
Sir s&b 150x4
Vs 4099 vs 4091
Which one is better
Please reply sir
(Describe something about digital amp
Technology)
Please rply
I have not used S&B 150 x 4
In Worldtech 4091.4 Analogue 130 x 4 is superb Amplifier.
4099.4 compact Digital is Also Good Amplifier
But Personally I Likes 4091.4 Analogue more
I have sold 4099.4 and 4091.4 almost 50 units all customers are Satisfied you can check my channel's Community Section.
Digital Amplifier - Low power Consumption for High Quality Output in limit,
Recieve Digital Signal Convert it to analogue Output , Less Heating, Small Circuit.
Analogue Amplifier -
Amplifies Analogue Audio Signal To Analogue Output (No Audio Signal Conversion), Bigger Circuit, Heating Is Present, Need good power Supply,
Personally I Like Analogue Amplifiers More Because it is our Will To Set It's Output Levels Loud or Quality.
Analogue Amplifiers Can Go louder than Digital.
And I am using Analogue Amps from 12+ years Easy To repair Sound quality we can set as per our Requirement.
Audio Output of 4091.4 is crystal Clear I have not used Amp like that before.
Sir price please
How to use as mono amp? If you bridge 4 chennals then its became 2 channals rt.
No that's wrong.
Price now
Ispe pioneer 1212 d4 bridge pr or do 9*6 speaker chala skta h
Easily
Sidhu moosewala 🥰🥰
Bro,
Kya price h is amp ka
and
kya ye amp achhe brand ke 4 heavy component speakers ko justify krega?
It is very Good Amplifier You can whatsapp @9045633168 for further details
2Ohm bridge mode pr smooth run krega ??
Bridge Mode Par 4Ohm Final Hota Hai Kisi Bhi Amplifier Mai
@@AHC20 agar dual coil subwoofer chalana ho ?
@@rastogi.abhishek11 single channel par 2 ohm par chalega ya phir Series kar ke 8 ohm par bridge mode par chalega Ya phir D2 Subwoofer Ho (Dual Coils 2 Ohm Each)
This amp vs s&b 806g, which one is more better in terms of sound quality
Worldtech WT-4099.4 Is Far Better
For Example
Supply Side Of S&B 806g have 8 pieces Z48N MOSFET
Total wattage of Supply Side Is 140Watts X 8 = 1,120W
(Z48N= 140Watts Per Piece)
Where else In WT-4099.4
Supply Side Have 6 IRF3205 Mosfets
Total Wattage Of Supply Side
200Watts X 6 = 1,200Waats
(IRF3205= 200Waats Per Piece)
S&B 806g Is Analog Amplifier
WT-4099.4 is Digital Amplifier which is Rare.
High Quality Components & Crystal Clear Sound Quality.
@@AHC20 thanks for the detailed comparison
@@prateeknagar147 even many mono amplifiers don't have 1200 Watts Supply section & Matching of supply and output section's watts is also very Important. Many amplifiers have 600 Watts Supply section but only 400 Waats Output section
@@AHC20 i have previously used worldtech mono but didn't had a good experience that's y was confused in this and 806g, since i m getting both at similar price.
@@prateeknagar147 in terms of 4 Channel Worldtech is best in Less known Brands But They need to work on mono amplifiers Supply & Output Watts Mismatch is present otherwise Body, PCB, Bass Knob, Components Top knotch supply & Output section Mosfets needs to get improved I have talked to Them For Same I hope they will work on it to Stay In Competition.
Sir is amplifier k jo wiring kri h apne ohm wali please🙏 uspe ek video hamare banaiye
I have been using this amplifier at home more than two weeks, as heavy 2.1 channel sound system, with power unit from Divyansh, @AHC.
This ampplier gives a cristal clear sound on each chaneeal and heavy punch bass on the bridge mode with Subwoofer.
Not only in car we can use at home as well.
I had a big hall around 30 feet of length and just 30% of volue is more than enough and can't bare more than that sound.
No sound distraction and humming at high volume sound.
Divyansh will guide you for amp setup and if you have any queries.
👍👍👍 I Hope You Are Enjoying.
Price
Price bata do