Absolutely 💯 on this Ranger. All those mods are pretty much on most people's wish lists. Sounds lame but the show stopper for me is always the bonnet lift. How on earth doesn't every car manufacturer not fit these - it'd be pennies! My mechanic cheered when I put them on the n70... incredible detail Mac & TJ some person gonna be vvv lucky 👍💪🙏✌️
Thanks, great VLOG. 22:25 just quietly, UV ray does not pass through glass in significant amounts. Heat rejection films are normally applied to the interior of flat glass windows to reduce the amount of infrared, visible light, and [some] ultraviolet (UV) radiation entering the windows. The film works :) Protection from UV light can be accomplished by a film that addresses only the UV spectrum. As UV is one of the main sources of fading - ceramic and nano do this quite well - which is why the film is fitted to the interior of the window.
Another awesome video, the time and effort you’ve put into building this is just phenomenal. Love the choices, I reckon the one thing I’d do is get that roll cover painted black if it’s even possible, maybe some front recovery points? Looks bloody brilliant, nice work guys.
Gday, this Ute is looking shit hot, great to see that ford have pre-wired at lot of the accessories which make life so much easier, I’ve really gotta enter the giveaway real soon, top job as always, cheers
Look usually I’d agree that ford did something stupid but the washer bottle isn’t an issue, if all the snorkel manufacturers decided to actually run the snorkel a bit further down they’d find they would miss the washer bottle 🎉 hence the safari snorkel doesn’t require u to remove it when u put it on 😮
For sure defs not a bad spot keaps the engine bay clean! But fitting a 4” snorkel through would be impossible unless u popped in down near the headlight and would look horrible!
arb had a prototype with ford roughly 5 months into the design of the next gen and it didnt run much longer then the phatbars one. guess its looks over actual functionality at the end of the day... @@macpreston
This build is hectic! You guys must be busy as keeping up with orders thanks to the giveaways. I ordered some stuff a month ago and still haven’t seen it 😅
Very very busy! We did have a stock number switch up with a couple designs but they are all printed now and sent this week! Won’t be long sorry for the wait!
The snorkel looks awesome, talked to phatbars and they did say its loud. But is it annoyingly loud? Does it drone on the highway? Also love the light setup.
Another awesome video, I have a question, are the aluminum bed rails OEM, I am unable to order them in the P.I. They do not come with Wildtrack or Raptor.
Hey his build is crazy!! I am from europe and want my new ranger to look like this. I love the extra headlights from NightHawk you have there. Can you give me the details on which size of head lights and which mounting bracket you useded to install these? Thanks Max
Hay lads, love the content.... Just in the process of ordering a platinum ranger and was wondering if the lift is just 2" all round? And i know the offset is "0" but what tyres and size u running?
Are you boys going to upgrade the oil return line to sump off the bottom of the turbo common cause of engine failure ....... no point making a shit hot build if it blows up inside 6 months
tinted the windows on my old single cab 08 bt50 myself and I swore black and blue I would never do it again. I swear it's the reason I am half bald 10 years later.🤣
![SAFEPLANET - ดาวเคราะห์ [ THE PLANET ]](http://i.ytimg.com/vi/4X1XL3I_k3c/mqdefault.jpg)
For your chance to Win this amazing prize buy any shirt from SHEDLIFE.co !!
I want to make my ranger one of a kind exactly like this one.
Tom needs to make a lot more appearances what a natural 😂 love the Ute so far
Haha he’s so easy to rev up to 😂
Absolutely 💯 on this Ranger. All those mods are pretty much on most people's wish lists. Sounds lame but the show stopper for me is always the bonnet lift. How on earth doesn't every car manufacturer not fit these - it'd be pennies! My mechanic cheered when I put them on the n70... incredible detail Mac & TJ some person gonna be vvv lucky 👍💪🙏✌️
Haha I know right ! 😂 thanks mate 🙏
Mate couldn’t agree more I need to do the cruiser asap!
James is the man! Used to help him out everytime he’d do work on our site.
Looking mint! Love seeing the obvious mods but also the minor ones that give the ranger that extra aesthetic
This was a great episode. Proud of how far Macca has come with solo filming. Great edits and premium content, cheers boiz
Thanks heaps mate appreciate that!
A nibbler would be the cleanest way to cut the snorkel out you can get attachments for your drill which are pretty handy
And it just keeps getting better! What a total weapon. Easily the best new ranger I've seen yet.
Thanks mate I agree but I am biased 😂💪🏼
Thanks, great VLOG. 22:25 just quietly, UV ray does not pass through glass in significant amounts. Heat rejection films are normally applied to the interior of flat glass windows to reduce the amount of infrared, visible light, and [some] ultraviolet (UV) radiation entering the windows. The film works :)
Protection from UV light can be accomplished by a film that addresses only the UV spectrum. As UV is one of the main sources of fading - ceramic and nano do this quite well - which is why the film is fitted to the interior of the window.
Mac & TJ upload, you know you're halfway through the week and it's only 2 more days until you can hit the tracks!
Exactly 💪
Another awesome video, the time and effort you’ve put into building this is just phenomenal. Love the choices, I reckon the one thing I’d do is get that roll cover painted black if it’s even possible, maybe some front recovery points? Looks bloody brilliant, nice work guys.
I really wanted to but I think it would just scratch off and end up looking very backyard rattle can!
Feels cool how I’ve been around since Mac had the NP300 and TJ had the pathfinder… Come a long way
🙌
Apreciate the long term support mate!!!
Nothing beats Mac's Navara from some years ago but this is cleannn
Good times 🤩
Yes, I love this ranger I’m mad keen to see the results
this thing is a rig now, i still want the tool box 😂! Thanks for the support legends, Mac you nailed it with the beer 😂
Haha atleast I got something rite 😂
this rig and just getting better and better love it
The Ranger looks sick! Got a couple of shirts in the mail today and they are bloody Rad! Love the packaging that dissolves in water too 🌎 🤙
How have I only just come across this page 😳😳 incredible! I need me one of those snorkels!
Looking awesome can't wait to see what else you do. Lucky person who wins this
Love the rims. Supplier detail. Keep up the nice videos
Nice episode. Great vibe, like the old school SL back track music.
Excellent giveaway boys. Spared no expense with the prizes.
Done my xrs330 with the pirate co gear on my ranger to works and looks mint
Couldn’t agree more! Great quality gear!
Oh yes the boys are back!!
Felicitaciones por dejar la Rangert en ese estado ,quedo terrible lo mejor,por mas ,saludos👍👏👏👏👏👏🇦🇷🍻
Gday, this Ute is looking shit hot, great to see that ford have pre-wired at lot of the accessories which make life so much easier, I’ve really gotta enter the giveaway real soon, top job as always, cheers
Have you a part number of the led lights and the holder for the lights behind the grill ?
This thing is one seriously good looking ranger💪🏻👍🏻
I always look forward to Wednesday arvo for some good good tj and mac
Thanks legend 🙏
awesome build Mac, the Ranger looks the goods🤟
Didn’t know where your left index finger was pointing at maca 😂 that things not meant for camera 🥴 Oi the rangers looking mint, flares are noice 👌
Another entertaining ep keep up the good work
Loving the build series, the ranger is awesome.
Should defs do an exhaust system on it 🙈
Not a bad idea !
Haha unfortunately wouldn’t sound to different unless the dpf is removed!
@macpreston maybe do one of those fancy ones with an "off road use" switches 😉
@@theactualtrokz hahaha gotta love the off-road use only excuse 😂
@@macpreston Hey Mac, are you bringing the kids shirts out in a size 10?
thoughts on ditching the factory roof rails for a cleaner look (or roof rack?)
I’ll leave that one for the new owner I think!
Look usually I’d agree that ford did something stupid but the washer bottle isn’t an issue, if all the snorkel manufacturers decided to actually run the snorkel a bit further down they’d find they would miss the washer bottle 🎉 hence the safari snorkel doesn’t require u to remove it when u put it on 😮
For sure defs not a bad spot keaps the engine bay clean! But fitting a 4” snorkel through would be impossible unless u popped in down near the headlight and would look horrible!
arb had a prototype with ford roughly 5 months into the design of the next gen and it didnt run much longer then the phatbars one. guess its looks over actual functionality at the end of the day... @@macpreston
TR back in the N80 👌
N80 number 3 😂 you could say I have a soft spot
@@tomroche7976 that’s the spirit bro!
She looks epic, we should make a poll for the return of the twin snorkels
Not sure if I’d ever go there again 😂
Truck looks dope asf now boys 🙌🏾
How good are the laser glasses haha 😅
Keen to see an airbox, tune and maybe front cooler 🤔
Unfortunately I didn’t want to upset the warranty being brand new! So won’t be doing engine mods this time!
@@macpreston this is true, such a nice car and excited to see who wins it 🙌🏾
Keen to come out with you boys and watch you do some glassy tracks again!
Just needs a slim black and white number plate now macca
Agreed!
This build is hectic! You guys must be busy as keeping up with orders thanks to the giveaways. I ordered some stuff a month ago and still haven’t seen it 😅
Very very busy! We did have a stock number switch up with a couple designs but they are all printed now and sent this week! Won’t be long sorry for the wait!
The snorkel looks awesome, talked to phatbars and they did say its loud. But is it annoyingly loud? Does it drone on the highway? Also love the light setup.
Na it’s fine with the window up! But I am the wrong person to ask I love everything loud 😂
I've seen this parked up at your place tj
Another awesome video, I have a question, are the aluminum bed rails OEM, I am unable to order them in the P.I. They do not come with Wildtrack or Raptor.
Yeah came with the wildtrak , unless you’re referring to the pirate camp co accessories?
Keep up the epic content.
Looking amazing 🤩
Hey his build is crazy!! I am from europe and want my new ranger to look like this. I love the extra headlights from NightHawk you have there. Can you give me the details on which size of head lights and which mounting bracket you useded to install these?
Thanks
Max
Thanks Max ! We have a company in Australia called Pirate Camp co that sells all that stuff , they may be able to ship it over your way ✌️
Hay lads, love the content....
Just in the process of ordering a platinum ranger and was wondering if the lift is just 2" all round? And i know the offset is "0" but what tyres and size u running?
Nice work. How did you get the full tail light to work like the Raptor?
Dammmmmmn !!! This is looking gooood 😎 🤘👍
How about a list of all of the mods?
Are you boys going to upgrade the oil return line to sump off the bottom of the turbo common cause of engine failure ....... no point making a shit hot build if it blows up inside 6 months
That’s fords problem joys of having warranty!
hey mac, what size tyres and lift is on this beautiful rig, assuming its legal too
Praying for Mac hopefully he gets a donut in this video
😂 he need to lay off the donuts 😝
Crying and still praying for Mac hopefully the misso releases him soon from dad duty's
Hahaha never lay off the donuts! Donuts are life 😂
Is that a 3" lift in that bad boy?
Why did you go a wildtrak over a XLT?
This my kind of knight in shining armer...♥♥♥
do you think you would put a tray on it?
Na the tub is to fancy!
So sick 🤙🏻
Hey Tom, Can you make some sliders for the K-Truck?
I say no but Mac somehow always twists my arm in ways that makes me do things I don’t want to do…. Stay tuned 😂
@@tomroche7976 Cant be the only thing he's twisting 👀 Phat bars with the Phat products!
@@unspokenixonly if he plays his cards rite at dinner 😂
Did you wire the radio to the fuse box or battery?
It’s fused from the accessories. I don’t like going off battery power I rather they turn off with car!
How much has the rig come to with all the mods on it
Build a drift track car giveaway 🤙🏻
Next build do a Pajero something noone ever does everyone does Nissan's Toyota's and Ford's
Sam eyels and Micheal dare 2 explore just did a Pajero!
essa camionete esta perfeita ! parabéns ! 😍
might be a silly question, but will this snorkel fit my next ford Everest platty? has the v6 also.
It might actually if the airbox and everything is the same
Prob give the phatbars boys a call
tinted the windows on my old single cab 08 bt50 myself and I swore black and blue I would never do it again. I swear it's the reason I am half bald 10 years later.🤣
Haha 😆 yeah bit of a skill hey
Hahaha it’s very tedious hey 😂
You should really change the name from shed life to tub life 😂
Don’t tempt me 😂😂
Can you fix your gutter on the back of your house, it’s really getting to me 😂👍
Hahaha one day 😂 haven’t even had time to mow lately!
Where are tye tub separaters from?
Pirate camp co ✌️
I am absolutely frothing this thing
Who won it?
Tony from Dubbo 🤟
i reckon it needs twin snorkels
This Mac bloke is haemorrhaging money lmao. Old mates gotta fkn money tree seems like it
16 years of being a sparky plus investment properties. Left school early and worked my ass off 🤙🏼 but yes money is starting to get slim 😂
Is the wildtrack accessories fit on to ranger XL?