I did this for friend today. Because my hand is small I didn't have to pull out the entire assembly. Thanks for the great video. EDIT I am woman who knows very little about tools or cars.
Thanks for video just ordered H11 bulb on Amazon for passenger side Pontiac G6. Will let you know how it goes. I replaced the driver side low beam H11 years ago and forgot how but wound up cracking the bumper plastic and clip like you. Thanks for refresher! I subscibed 😁
@@ArrowheadGarageGot it done with more knowledge minimizes frustration getting access to the bulb issues. Engineers could have done better job in access design. lol Thanks much! 😁
I personally prefer to take entire nose-cone off and replace the pigtail with a high temp pigtail. Prevents future burnup. Take the time while the nose cone is off to clean up and inspect the cooling. Just cleaning back there can change the front view impression instantly. It's only about 7 more screws.
thanks for the suggestion, I think I will try your ideas and get that cover off of my Pontiac G6 and replace the drivers side wiring pig tale on the headlight.
hello can you provide a part number for a high temp pigtail / socket ? you said to "clean back there" but where exactly ? can you point me to a tutorial or video ?
H9 = High Beam, H11 = Low and High Beam. You could fit the H11 bulb into the H9 socket but the H9 harness plug will not fit over the H11 bulb connector. Each harness plug is made to fit it's corresponding H9 or H11 bulb. To make it fit, you would have to grind down the tabs in the harness plug.
Thank you for this video, BUT ..... why did you use the word "EASY" in the title. This is not easy at all, relative to any of the other headlight bulb replacements I have done, and I find your title to be rather misleading.
“If you do break something the screws up top will hold in place” sounds fuckin good to me🤣
I did this for friend today. Because my hand is small I didn't have to pull out the entire assembly. Thanks for the great video.
EDIT
I am woman who knows very little about tools or cars.
That is awesome, my daughter at times helps Dad get in those tight spots... Good job!!!!
Thanks for video just ordered H11 bulb on Amazon for passenger side Pontiac G6. Will let you know how it goes. I replaced the driver side low beam H11 years ago and forgot how but wound up cracking the bumper plastic and clip like you. Thanks for refresher! I subscibed 😁
sweet.. let me know how it goes!
@@ArrowheadGarageGot it done with more knowledge minimizes frustration getting access to the bulb issues. Engineers could have done better job in access design. lol Thanks much! 😁
My plastic is smashed. So can I just put a bulb in there? Then tape it up so it doesn't get wet?
Yep thats the best way to fix it unless you wanna buy new parts.
Your vid was the 1st one on the list!
Woot Woot!! Thanks for watching!
I personally prefer to take entire nose-cone off and replace the pigtail with a high temp pigtail.
Prevents future burnup.
Take the time while the nose cone is off to clean up and inspect the cooling.
Just cleaning back there can change the front view impression instantly.
It's only about 7 more screws.
thanks for the suggestion, I think I will try your ideas and get that cover off of my Pontiac G6 and replace the drivers side wiring pig tale on the headlight.
hello can you provide a part number for a high temp pigtail / socket ?
you said to "clean back there" but where exactly ? can you point me to a tutorial or video ?
Thank you kind sir. Appreciate your knowledge.
Very welcome, love these cars!
would the wiring come with a new headlight assembly? or would i have to wire new lights?
I don't think they come with a new wiring harness for them, so yes you best get those pig tail wires.
Can you please tell me whick bulb will be suitable for pontiac pursuit 2006 headlight low and high beem?
Is it the same bulb for the low beam and high beam?
My 2008 Grand Prix had the same problem with the wires burning up.
thanks brian!
You bet, working on a new video on how to rewire the heads for when they burn up the wiring... aughhhh
What size bulb for low beam!? H11 or H9, also could I fit h11 into both?
H9 = High Beam, H11 = Low and High Beam. You could fit the H11 bulb into the H9 socket but the H9 harness plug will not fit over the H11 bulb connector. Each harness plug is made to fit it's corresponding H9 or H11 bulb. To make it fit, you would have to grind down the tabs in the harness plug.
Hi! So my 09 g6 passenger headlight went out like the whole assembly the blinker and head lights bulbs dim and bright lights any suggestions?
Did you get it fixed and how? I am having the same problem now..
G6 Brotherhood !😅
what does it mean ? with or without ctf when ordering headlight lens for 2010 pontiac g6
No idea. H9 = High Beam and H11 = Low and High Beam
Am try to buy a car like this but people saying this car is for girls I just want to used to work because gas is expensive
I love being a big tough guy driving my g6!
Who cares what they think when you are saving fuel while they are spending money on a car payment and higher insurance.
Exactly u do git to do wat works for u. I love my g6 runs good And keeps up with traffic so and fuel efficient
What idiot told you they were a girl's car? I'm on my 3rd one and I can assure you nobody would dare say that to me!😉
trust me look up G6 widebody, issa sexy car
How about the left side?
Same for both sides!
Thank you for this video, BUT ..... why did you use the word "EASY" in the title. This is not easy at all, relative to any of the other headlight bulb replacements I have done, and I find your title to be rather misleading.
Is your Pontiac a convertible?
Yes it is
They don’t design them to work on, if they did it would be easy. That’s not as much fun!
They sure don't! Pontiac G6 headlight h11 bulb replacement are a pain in the @$$
And hopefully after all that BS, the lights are aimed properly..
They are perfect!!!! Thanks for watching this BS