Great clear explanation of good support to the cutting point. A tiny tripod of finger tip control puts the cutting point of the burr exactly where you want it. Thank you, great teaching of a practical skill.
Thanks Blain! Everything that you mentioned about the burs wrapping around the prongs has definitely happened to me ruining several practice pieces that I purchased just for this reason! Your advice has helped me immensely! I have to admit, like the many that you mentioned, I too was a bit freaked out about having my finger so close to the spinning, sharp bur! But, I’m still here… all fingers accounted for, no scars to tell war stories about! Just stunning pieces that I can now attribute to your great video! Again, thank you! This is an amazing video and I recommend it to anyone who is having the same problem!
I took his 3 month course some years ago when he was in VA beach, VA. He's incredible. Teaching how to properly use the correct tools to set beautiful stones. Would love to see him again some day.
Thank you and Rio Grande. Great tips to help me overcome many of the mistakes I've been frustrated with. Love Rio Grande products and these tutorials take it all to great heights.
:) Dentistry 101! as a dentist, new to working with metal, I am shocked to see so many jewelry workers use a palm grasp with handpiece and don't know how to use their fingers for resting point, fulcrum and connection!Thanks for this video
I love living in Albuquerque, just 15 minutes away from Rio Grande, Should drive right on down and take some classes sometime, i go their often to pick up supplies. Great people.
Thank you. I'm self teaching. And learned so much in this video. I'm trying to learn cutting a shelf for oval and pear shaped faceted gemstone bezel settings. If I am cutting a shelf in an oval, say, do I go in the direction of the rotation the burr, or the opposite. Seems the same direction makes it feels easier, but more likely to slid off??? Any tips? Thanks again, and smile!! You're helping so many! Mimi
Hi, +huskyfluffy! Our Jewelry Tech Team applies pressure in the opposite direction of the rotation. Otherwise, the bur tends to run away and it's more likely to slide off. Let us know if we can provide more information!
Hello Edrei, Thanks for your question. The exact burr shown here is not identifiable, but you can see our selection online here: www.riogrande.com/search/go?w=burr Hope this helps!
Hi Chico, Thanks for watching. Rio does sell a couple of different training video sets from Blaine. You might be interested in them and can find them here: www.riogrande.com/search?q=blaine+lewis+dvd&c=&t=1&pageSize=32 Thanks again for watching!
Hi Patezorra. Blain is using the NSK EMax EVOlution Dual-Port Micro-Motor System with Gear-Reduction Handpiece. Our catalog number is 117484. I hope this is of some help. Mark N Tech
Common the middle finger do not go foward because you can't hold a shaft only with the thumb and index. By reflex the middle finger will hold the shaft just like the other ones. Nobody old a shaft with two fingers.
Am I the only person who burns their finger on the collet housing of the #30 hand piece while trying to hold the burr correctly? Maybe I need to switch to a quick-change hand piece since it not as big around.
Thanks Blain! Everything that you mentioned about the burs wrapping around the prongs has definitely happened to me ruining several practice pieces that I purchased just for this reason! Your advice has helped me immensely! I have to admit, like the many that you mentioned, I too was a bit freaked out about having my finger so close to the spinning, sharp bur! But, I’m still here… all fingers accounted for, no scars to tell war stories about! Just stunning pieces that I can now attribute to your great video! Again, thank you! This is an amazing video and I recommend it to anyone who is having the same problem!
Great clear explanation of good support to the cutting point. A tiny tripod of finger tip control puts the cutting point of the burr exactly where you want it. Thank you, great teaching of a practical skill.
Thank you for the comment!
Thanks Blain! Everything that you mentioned about the burs wrapping around the prongs has definitely happened to me ruining several practice pieces that I purchased just for this reason! Your advice has helped me immensely! I have to admit, like the many that you mentioned, I too was a bit freaked out about having my finger so close to the spinning, sharp bur! But, I’m still here… all fingers accounted for, no scars to tell war stories about! Just stunning pieces that I can now attribute to your great video! Again, thank you! This is an amazing video and I recommend it to anyone who is having the same problem!
I took his 3 month course some years ago when he was in VA beach, VA. He's incredible. Teaching how to properly use the correct tools to set beautiful stones. Would love to see him again some day.
Very useful technique demonstrated there. I’ll remember this. Thanks. The professionals always make it look easy.
You are a wonderful teacher. I appreciate the close up clear view of the ring and the angles of the bur and the cuts.
Thank you and Rio Grande. Great tips to help me overcome many of the mistakes I've been frustrated with. Love Rio Grande products and these tutorials take it all to great heights.
Thank you so much for your lessons on prongs. I am just starting out and love jewelry and making it. Please come out with more tricks of the trade.
Another excellent video. Thank you.
Exactly what I needed!
:) Dentistry 101! as a dentist, new to working with metal, I am shocked to see so many jewelry workers use a palm grasp with handpiece and don't know how to use their fingers for resting point, fulcrum and connection!Thanks for this video
Thanks for the feedback!
Great video Rio. Thanks for the tips Blaine. (Would love more on stone setting. )
Blaine's class rocks! He's even better in person!!
Blaine is such a great teacher!!
Pennee P
I Really appreciate your videos. The most informative ones I can find that make sense. You explain everything so well.
Thanks for your kind words, Ash! We're glad to hear that you find these videos to be helpful. We feel so fortunate to work with Blaine.
The first technique got me thank you
Thank you so much for a such a beautiful demonstration .
I would live to take a class with Blaine. Thank you for the video! Any graver sharpening videos using the dual angle power hone?
This was a great video!!
I love living in Albuquerque, just 15 minutes away from Rio Grande, Should drive right on down and take some classes sometime, i go their often to pick up supplies. Great people.
Thank you, +meded moon! We so appreciate you saying that! We look forward to seeing you next time :)
Hello, where is Rio Grande?
Edrei in abq, NM
Thank you. I'm self teaching. And learned so much in this video. I'm trying to learn cutting a shelf for oval and pear shaped faceted gemstone bezel settings. If I am cutting a shelf in an oval, say, do I go in the direction of the rotation the burr, or the opposite. Seems the same direction makes it feels easier, but more likely to slid off??? Any tips? Thanks again, and smile!! You're helping so many! Mimi
Hi, +huskyfluffy! Our Jewelry Tech Team applies pressure in the opposite direction of the rotation. Otherwise, the bur tends to run away and it's more likely to slide off. Let us know if we can provide more information!
Please give a link for that black swivel device that holds the ring.
Thank you in advance.
You are a good teacher.
Hi Linda, Thanks for commenting! Blaine is an amazing teacher. We're so fortunate to work with him.
I would love to see the stone setting... And finished set...
We have a whole playlist about stone setting, check it out! th-cam.com/play/PLQ6Dbws9mbJSYD_Tl1kVGQ4AWHlIBeGcz.html
What hand piece and flex shaft is that your using? I noticed the hose(?) going from the hand piece to the motor is smaller and coiled.
Same been searching comments for that answer u can call them in previous videos mark mentioned a number I might just call lol
Should you use this burr for 3D cad pave settings after the casting of alloy
Helpful!
THank you. What size Hart bur were you using? What size would be good to buy.
Hi there! That setting looks like about a 1carat setting so the bur is likely about 4mm.
Excellent! Thank you!
You are welcome!
Great lesson!
Thanks, James! Our employees and students find that Blaine's tips on hand positioning make a big difference. Glad you found the video helpful!
Thank you so much!!!!!!!!!!!!
This was a great video. this was how I was tought when I was working with a jeweler.
Wow great vids! I got a high recommendation from an alumni to take a course with Blaine, and I can understand why.
How are you not cutting a divot in your finger by touching the back of that rotating burr?
How does the bur not cut the finger?
Where are those practice brass solitaire rings available?
Hi Allen, Thanks for asking! We carry practice settings designed by Blaine: bit.ly/2KTm1RI. Hope this helps!
Hi friend, what is the name of this strawberry you use? Much obliged.
Hello Edrei, Thanks for your question. The exact burr shown here is not identifiable, but you can see our selection online here: www.riogrande.com/search/go?w=burr
Hope this helps!
the only burrs I saw him use was first a setting burr then a heart burr.
HOW NICE.
what is the ring holder/rotating ring clamp called and where is it available?
Hi, Lana! Great question. This is the GRS BenchMate Inside-Ring Holder :)
www.riogrande.com/Product/GRS-BenchMate-Inside-Ring-Holder/118666
does he have an on line course? if so where can I watch it?
Hi Chico, Thanks for watching. Rio does sell a couple of different training video sets from Blaine. You might be interested in them and can find them here: www.riogrande.com/search?q=blaine+lewis+dvd&c=&t=1&pageSize=32 Thanks again for watching!
if I buy the DVD will I get to download it instantly or do I get a physical copy?
This item is a physical DVD set. Thanks for asking!
what kind of micromotor have Blaine on this video I wanna buy it
Hi Patezorra. Blain is using the NSK EMax EVOlution Dual-Port Micro-Motor System with Gear-Reduction Handpiece. Our catalog number is 117484.
I hope this is of some help.
Mark N Tech
4mm Thanks so much.
so, this freaks me out a bit--does the friction from the bur shaft not burn your finger?
Hey, +Meghan Langley! You use a little bur life on your finger it prevents the friction from burning your finger. Works like a charm. :)
+Rio Grande okay awesome thank you! That is what I would have tried but good to have confirmed! looking forward to trying my hand at tube setting
Let us know how it goes for you! :)
do you make lessons or just sell tools?
Jewelers are tough, Meghan.
Doesn't your middle finger get hot when it has contact with the spinning bur?
Common the middle finger do not go foward because you can't hold a shaft only with the thumb and index. By reflex the middle finger will hold the shaft just like the other ones. Nobody old a shaft with two fingers.
Am I the only person who burns their finger on the collet housing of the #30 hand piece while trying to hold the burr correctly? Maybe I need to switch to a quick-change hand piece since it not as big around.
powers1217 this happens to me too. I was hoping for more on how to hold the #30 correctly.
can you teach me sir!
What if people don't have the luxury of owning a grs benchmate, working vertically to their work is the only option they have
The mellow frost compellingly switch because brother utrastructurally blind about a rabid gram. abashed, finicky crayon
Thanks Blain! Everything that you mentioned about the burs wrapping around the prongs has definitely happened to me ruining several practice pieces that I purchased just for this reason! Your advice has helped me immensely! I have to admit, like the many that you mentioned, I too was a bit freaked out about having my finger so close to the spinning, sharp bur! But, I’m still here… all fingers accounted for, no scars to tell war stories about! Just stunning pieces that I can now attribute to your great video! Again, thank you! This is an amazing video and I recommend it to anyone who is having the same problem!