Se o seu mouse n funcionou diretamente com USB, entt ele vai precisar de um adaptador. Da pra tirar ele dos cabos adaptadores prontos e soldar tudo certinho. É uma PCB pequena, q deve caber dentro do mouse/teclado e nem ter diferença
all mouse original china brand.. can change motherboard.. PS2 to USB or USB to PS2.. although different china brand .. just see position latches board on case.. if same position.. you can chance it
its not working, ps2 port three point voltage is 5.6 volt and one ground, and usb port is one point voltage is 5.6 volt, one ground, and two point single point
If you stop the video at 8:32 you can tell where it has been split and edited . The cable is now coiled up and none of the solder wires are in the same place they were a few seconds before stop the video again at 8:33 and there is something red over the wires . The space where he soldered the red black and greed wires is now empty and the black wire is now on the 3rd hold down . They changed the mouse in the edit part at 8:32 in the video . Shame on you Electro sight for making a fake video .
At 4:36 you can see that the port is actually a usb port by seeing on the pcb where the wires are connected that means this mouse was never a ps/2 mouse also after a few seconds when he flips the board you can see all the solder was clean except the part where the wires were connected which means he soldered a ps/2 cable on the mouse by removing the factory USB cable thus this was a USB mouse already. SUCH A FAKE VIDEO
It didn't work for me. I'm pretty sure I got the wiring correct, and my computer recognizes it as a USB device, the laser turns on, but it keeps saying something malfunctioned. E: My PS2 mouse also has different letters on it, it goes from left to right: D C V G, instead of: D- D+ G V.
This assumes the mouse already has usb compatibility inside it. You need a converter PCB to convert the signal. I've been looking around for some kind of driver software that could make this work though.
because your device it's designed by original IC to originally cable.. if you device is PS2 cable so can't change to USB... because ic of your device was programed PS2 cable.. not USB
Its fake video the mouse wont work. It is already a usb mouse he joined it to ps/2 cable before shooting the video (the conversation required a adaptor. it cannot done directly)
YOU CAN CHANGE USB TO PS2 CLOCK -D+ DATA ----- (DATA-) WHY ? PS2 IS ANALOG NO NEED TO FIRMWARE BUT CHANGE PS2 TO USB (SOME NEW IC CAN (10%)) IN 90% YOU RIGHT NEED SMALL IC FIRMWARE TO TEEL USB DEVICE VID PID AND HUMAN INTERFACE FIRMWARE
event you put right port cable same both V+ PS2 port mouse to V+ USB cable D+ PS2 port mouse to D+ USB cable D - PS2 port mouse to D - USB cable G PS2 port mouse to G USB cable .... it never works in reality because each IC program peripheral was designed by original cable can used this video just for fun
NO IT NOT IN YOUR PCB SAY USB IN 90% CANT CHANGE PS2 TO USB VERY LOW IC SUPPORT 2 OPTION USB AND PS2 IN YOUR MUSE BOARD d+ d- gND VCC IN OLD MODEL CLOCK DATA VOLTAGE AND GND USB AND PS2 USE 5 VOLT AND PIN IS NOT DIFFERENT CLOCK ---DATA+ DATA----DATA - V---VOLTAGE +5(IF NOT WRITE IN THE BOARD THE NEAR CAPACITOR - IS GND +IS 5VOLT ) YOU CAN CHANGE USB TO PS2 (BECUASE PS2 IS ANALOG AND NO NEED TO FIRMWARE VID AND PID COMPANY NAME EXAMPLE ASUS K56 MUSE ) BUT IF YOU CHANGE OLD PS2 TO USB ("USB NOT RECONISED ")PROBLEM USB MUST KNOW "HUMAN INTERFACE OR MASS STRAOGE " MUST WRITE FIRMWARE
@@skelllzar check on-line , there are many, most have PS2 and keyboard (purple and green plugs) via an adapter interface to USB plug. $6+usd www.amazon.com/s?k=ps2+to+usb+adapter&sprefix=ps2+to+usb+&ref=nb_sb_ss_ts-a-p_1_11 Just make sure u buy the one with the interface converter built-in to the cable.
@@bhimamasare9427 Well, if you remove the screw, can you open it? I find that most of my electronics, you can't open them when you remove the screw. You have to damage the plastic body to open them.
@@louistournas120Yes, I could open my mouse just by removing the screws. Some electronics are glue shut(use some glue remover for it) and some have little clips and both cause a more or little damage to plastic body .
@@bhimamasare9427 : I hate their designs. 1980s, 1970s TVs and VCRs were easy to open. I break away the plastic clips and melt the plastic on today's stuff to make it easier to open the next time around.
At 4:36 you can see that the port is actually a usb port by seeing on the pcb where the wires are connected that means this mouse was never a ps/2 mouse also after a few seconds when he flips the board you can see all the solder was clean except the part where the wires were connected which means he soldered a ps/2 cable on the mouse by removing the factory USB cable thus this was a USB mouse already. SUCH A FAKE VIDEO
Video is deceptive and you are a liar and do not have any information to provide - you apply to a mouse of a certain type and not all the mouse like the same because the companies are multiple and variable
пусть не пиздит. такой фокус проканает если сам контроллер на мышке или клавиатуре поддерживает USB коннект. так же как клавиатура/мышь из USB превращается простым переходником в PS/2. А вот если USB поддержки нет, то тут нужен только переходник с контроллером !!!!!
Check out those colours of wire Use those 4 wires only and leave that 2 wires free, Check for (Voltage) (V)+ Red, (G)-black (data) (D+) Green, (D-)white
excellent worksmanship well done tweaking old devices and repurposing old electronic hardware very good business opportunity
9:02 three people for: cameraman, mouse mover, and director
hahaha yeah
The title of the video should mention clearly that the mouse has to be "USB-COMPATIBLE"
Bro i want to use ps2 and usb cable in mouse at same time so i connect a wire of usb cable with mouse motherboard but it's not working why brother?
hey i have connected my mouse there is power in mouse but not working
It is written on board that it is usb one
8:08
Ya bro. Ye khule aam chutiya bna rha h. Dislike maro saalo ko
Masst bhai maza aa gaya.. really helpful 🙂 keep making videos 👍💯
Se o seu mouse n funcionou diretamente com USB, entt ele vai precisar de um adaptador. Da pra tirar ele dos cabos adaptadores prontos e soldar tudo certinho. É uma PCB pequena, q deve caber dentro do mouse/teclado e nem ter diferença
all mouse original china brand.. can change motherboard.. PS2 to USB or USB to PS2.. although different china brand .. just see position latches board on case.. if same position.. you can chance it
Nice demonstration of a good technique.
The mouse you r showing already usb mouse.
Yah its true
its not working, ps2 port three point voltage is 5.6 volt and one ground, and usb port is one point voltage is 5.6 volt, one ground, and two point single point
Bhia Logitech PS2 me 5 pin hai isko kaise samjhe konsi kaha lagani h
what did u connect clock wire to ?
The cursor is visible but the left and right click don't works.... Scrolling works well
Can you help me out
do not waste your time. it will not work.
If you stop the video at 8:32 you can tell where it has been split and edited . The cable is now coiled up and none of the solder wires are in the same place they were a few seconds before stop the video again at 8:33 and there is something red over the wires . The space where he soldered the red black and greed wires is now empty and the black wire is now on the 3rd hold down . They changed the mouse in the edit part at 8:32 in the video . Shame on you Electro sight for making a fake video .
At 4:36 you can see that the port is actually a usb port by seeing on the pcb where the wires are connected that means this mouse was never a ps/2 mouse also after a few seconds when he flips the board you can see all the solder was clean except the part where the wires were connected which means he soldered a ps/2 cable on the mouse by removing the factory USB cable thus this was a USB mouse already. SUCH A FAKE VIDEO
Also you can see USB sign on the board
It didn't work for me. I'm pretty sure I got the wiring correct, and my computer recognizes it as a USB device, the laser turns on, but it keeps saying something malfunctioned.
E: My PS2 mouse also has different letters on it, it goes from left to right: D C V G, instead of: D- D+ G V.
This assumes the mouse already has usb compatibility inside it. You need a converter PCB to convert the signal. I've been looking around for some kind of driver software that could make this work though.
because your device it's designed by original IC to originally cable.. if you device is PS2 cable so can't change to USB... because ic of your device was programed PS2 cable.. not USB
Its fake video the mouse wont work. It is already a usb mouse he joined it to ps/2 cable before shooting the video (the conversation required a adaptor. it cannot done directly)
YOU CAN CHANGE USB TO PS2 CLOCK -D+ DATA ----- (DATA-)
WHY ? PS2 IS ANALOG NO NEED TO FIRMWARE
BUT CHANGE PS2 TO USB (SOME NEW IC CAN (10%)) IN 90% YOU RIGHT
NEED SMALL IC FIRMWARE TO TEEL USB DEVICE VID PID AND HUMAN INTERFACE FIRMWARE
@@davodamirajam1276 yah
event you put right port cable same both
V+ PS2 port mouse to V+ USB cable
D+ PS2 port mouse to D+ USB cable
D - PS2 port mouse to D - USB cable
G PS2 port mouse to G USB cable
.... it never works in reality
because each IC program peripheral was designed by original cable can used
this video just for fun
Help mine have green red white and yellow cable how to connect
(Voltage) (V)+ Red, (G)-black
(data) (D+) Green, (D-)white
Might be yellow is ground (negative)
Check for continuity in multimeter
Ninguno de estos videos sirve si no explican como reconocer mirando en la placa impresa porque no todas las placas viene con los codigos
You are a real youtuber
yar fake videos to mat bnao tum mouse ke board prr usb likha hua he itna pgl koini hota he
Bhai ye btao ps2 ko usb cable lga kr ni use kr skte h.?
What a catch! and when he flips the board you can clearly see condition of solder on the board and they faked USB mouse as a PS2
I'm your first sub
Edit: remember me when you're famous 🙌👏🙏🙇
@Daker Gamer 24 que es su primer suscriptor que lo recuerde cuando se vuelva famoso
Bhai mobile ke usb cable port se keyboard cable port change kar sakte hai
Yes...
It will not make a USB-only keyboard work in PS/2.
It will not make a PS/2-only keyboard work on USB
вот как раз из USB сделать PS/2 можно таким способом
Yesssir dis helped a lot i got a wireless mouse and keyboard and my pc has no wired mouse or keyboard took me all nite to dis vid pluz dis works tho
i try converting but not working
same here
NO IT NOT IN YOUR PCB SAY USB IN 90% CANT CHANGE PS2 TO USB
VERY LOW IC SUPPORT 2 OPTION USB AND PS2
IN YOUR MUSE BOARD d+ d- gND VCC
IN OLD MODEL CLOCK DATA VOLTAGE AND GND
USB AND PS2 USE 5 VOLT AND PIN IS NOT DIFFERENT
CLOCK ---DATA+
DATA----DATA -
V---VOLTAGE +5(IF NOT WRITE IN THE BOARD THE NEAR CAPACITOR - IS GND +IS 5VOLT )
YOU CAN CHANGE USB TO PS2 (BECUASE PS2 IS ANALOG AND NO NEED TO FIRMWARE VID AND PID COMPANY NAME EXAMPLE ASUS K56 MUSE )
BUT IF YOU CHANGE OLD PS2 TO USB ("USB NOT RECONISED ")PROBLEM
USB MUST KNOW "HUMAN INTERFACE OR MASS STRAOGE "
MUST WRITE FIRMWARE
you got the point! very explained
that's true answer
Thanks for the wiring explanation !
That is not a PS2 mouse because if it was PS2 it would show 5 wire but it shows here only 4 wire that is +,-,d-,d+ on usb
We can also just join USB male port by cutting that mouse wire. I'm genius (Sarcasm)
6:26 what is this
plz make a. video on conversation of. ps2 keyboard to usb keyboard like this video
Ok
Nice work bhai
mouse me usb pendrive bhe lag jaye.
what to do if we dont have a singing iron
you can go to nearby electronic repair shop and ask them to do the work of soldering iron, they might charge very less or even free
será que todos los que convierten mouse ps2 a usb se quedan mudos, manito abajo
y 4 minutos para saber que pin es cada cable.... xd
Ahora prueba con un teclado ps2 a usb?
I have ps/2 mouse and its from my old computer
Just buy ps/2 to usb adapter
Why not use an adapter?
there is no adapter for ps2 to usb
@@skelllzar check on-line , there are many, most have PS2 and keyboard (purple and green plugs) via an adapter interface to USB plug. $6+usd www.amazon.com/s?k=ps2+to+usb+adapter&sprefix=ps2+to+usb+&ref=nb_sb_ss_ts-a-p_1_11
Just make sure u buy the one with the interface converter built-in to the cable.
Thank you so much bhai
So quem não sabe ler que não vai ver que na placa do mouse já tá escrito USB
You have a mouse with a screw.
Even I got one with screws.
@@bhimamasare9427
Well, if you remove the screw, can you open it? I find that most of my electronics, you can't open them when you remove the screw. You have to damage the plastic body to open them.
@@louistournas120Yes, I could open my mouse just by removing the screws. Some electronics are glue shut(use some glue remover for it) and some have little clips and both cause a more or little damage to plastic body .
@@bhimamasare9427 :
I hate their designs. 1980s, 1970s TVs and VCRs were easy to open. I break away the plastic clips and melt the plastic on today's stuff to make it easier to open the next time around.
@@louistournas120 Agreed!
Thanku bro
At 4:36 you can see that the port is actually a usb port by seeing on the pcb where the wires are connected that means this mouse was never a ps/2 mouse also after a few seconds when he flips the board you can see all the solder was clean except the part where the wires were connected which means he soldered a ps/2 cable on the mouse by removing the factory USB cable thus this was a USB mouse already. SUCH A FAKE VIDEO
👍👍 thank you BRO...
4:41 USB printed on PCB
fake video
oh for love of GOD, wash your hands frequently ,.......those nails says you dont wash your hands
Video is deceptive and you are a liar and do not have any information to provide - you apply to a mouse of a certain type and not all the mouse like the same because the companies are multiple and variable
Thank's a lot
Thanks a lot, bro
bro help me i have blue green yeloow white
Check the terminal using multimeter as shown in vido
@@electrosight3802 I don't have a multimeter how should I check?is there any other way ?
Did you have led
Connect led and battery series and check it
This is a USB mouse, not a PS / 2 mouse. Why are you fooling people
Poderia ter tirado a música e explicado,a musica tira a atenção
пусть не пиздит. такой фокус проканает если сам контроллер на мышке или клавиатуре поддерживает USB коннект. так же как клавиатура/мышь из USB превращается простым переходником в PS/2. А вот если USB поддержки нет, то тут нужен только переходник с контроллером !!!!!
Nail nice
какое то наебалово, а как же генератор высокочастотных импульсов, который нужен для усби?
It didn't work for me because this mouse already usb port so i put dislike
Mere mouse me 6 cables hai
Check out those colours of wire
Use those 4 wires only and leave that 2 wires free,
Check for
(Voltage) (V)+ Red, (G)-black
(data) (D+) Green, (D-)white
👍👍👏👏
Dude colour code those nails...
Bhai mere pass bhi yhi mouse hai
На микросхеме обозначение V+ G- D+ D- стандарт USB враньё
si
Me quedé sin mouse xd
Hlo Guys koi ise try mat krna isse mouse karab ho jayenga
Wash your hand
Don't racicsm bruuh
thank you
I have Mouse but tipe of this Mouse Is a trust
Jsjssjkssjskj de mas mal le salen fingir xD
𝓣𝓱𝓪𝓷𝓴 𝔂𝓸𝓾 𝓫𝓱𝓪𝓲
fake
Yes it will not work.i tried
Fake
Сомнительно
Kitna farzi ka time liya
Развод 👎
fake video usb cable is being installed on usb mouse, how funny
Don't use music dislike
fake usb to usb louser
Fake video
best dislike