Jeep Rock Sliders ANYONE Can Build! Low buck diesel truck Episode 10

แชร์
ฝัง
  • เผยแพร่เมื่อ 17 ต.ค. 2024
  • In Episode 10 of the Low Buck Diesel Truck I take some steel lying around my shop and bend it into some jeep rock sliders! These are very easy to make, anyone can do it! Follow along as I use my bender, dimple die and welder to make these 2 rock sliders for my truck!
    Follow Me on Instagram!
    / bleepinjeepnate
    If a BleepinJeep video has ever helped you consider returning the favor by:
    • Supporting us on Patreon here: / bleepinjeep
    • Becoming a Member here on TH-cam: bit.ly/2wGeSec
    • Buying a T-Shirt Here: www.bleepinjeep...
    • Or Just leaving a kind comment on FB here: / bleepinjeep
    This product is meant for entertainment purposes only. Your mileage may vary. Do not try this at home. Void where prohibited. Some assembly required. For off-road use only. Slippery when wet. Batteries not included. Do not use while operating a motor vehicle, heavy equipment, cherokee XJ, wrangler TJ, wrangler JK, or any Jeep vehicle, especially the newer Fiat ones. How-to videos may be too intense for some viewers and children under 30 years of age. Please remain seated until the 4x4 ride has come to a complete stop. Studies have shown viewing these videos causes increased cancer risks in laboratory test people. I am not a professional, I have no training, I'm not even particularly good at horse whispering. Don't believe everything that you know. Please keep your hands in the vehicle at all times. Do not tap on glass. Do not eat anything that has been on the floor for more than 3 days. Keep your hands to yourself. Not to be taken internally. Reproduction strictly prohibited. Driver does not carry cash. Objects in Bleepinjeep mirrors may be farther than they appear.
    02346

ความคิดเห็น • 263

  • @HoosierDaddy_
    @HoosierDaddy_ 5 ปีที่แล้ว +3

    I'm glad you're pushing for people to start welding and fabricating. Now that there are inexpensive welders in the market, there's no excuse not to. Metal is cheap and you can learn fast. Better than paying hundreds of dollars for an aftermarket piece.

    • @natebleepinjeep9564
      @natebleepinjeep9564 5 ปีที่แล้ว +1

      I couldn't agree more! Good fabrication tools have never been more affordable! And its very rewarding to be able to build it yourself

  • @ebalmes
    @ebalmes 5 ปีที่แล้ว +12

    That intro turbo whistle gets me every time!

  • @poormansgarage443
    @poormansgarage443 5 ปีที่แล้ว +2

    Probably the baddest j10 love the look of it great work Nate

  • @stevenlowrance05
    @stevenlowrance05 5 ปีที่แล้ว +1

    Very cool looking. Can’t wait to see the rear bumper you come up with

    • @natebleepinjeep9564
      @natebleepinjeep9564 5 ปีที่แล้ว

      Thanks you! Lots of ideas for the rear bumper! I'm pumped to get it all this fabrication done so I can start getting this truck driving!

  • @DaysofPainandVictory
    @DaysofPainandVictory 5 ปีที่แล้ว +2

    Looks great! I like the idea of welding that plate from the backside only, nice clean look. Gets me excited about building the sliders for my full size Cherokee! Planning on cutting out the rockers on my though to tuck them up higher, but we likely have different goals for our FSJs

    • @natebleepinjeep9564
      @natebleepinjeep9564 5 ปีที่แล้ว +1

      Thanks! Sounds like you have a fun project yourself

  • @theslab6457
    @theslab6457 4 ปีที่แล้ว

    Nate, I'm 55 and a 4x4 / Muscle Car fan. I've learned so much watching you and how you make things happen. Keep up the good work and videos.

  • @ChasWG
    @ChasWG 5 ปีที่แล้ว +1

    A little over a year ago I took the plunge and looked on one of those FaceBook Market Place pages and found a guy selling a "new in the box" Cornwell Tools welder for $425. I looked it up and the darn thing normally sells for almost $900 so I rushed right over to have a look at it and sure enough. It was still sealed in the box and never been used. So I offered him $400 cash and I walked away with a great machine. I then watched every MIG welding video n YT and then went out the garage and melted metal to metal practicing on silly things and small bits of scrap steel before I bought real stuff to hang on the Jeep.
    Since then I have built and added so much cool stuff to my XJ. Front and rear bumpers, mid-frame stiffeners, rock sliders, rear tire carrier and the latest is a roof rack system.
    I love to fabricate stuff. I could use a few more cool tools like a bender and I would love to have a plasma cutter, but I'm getting by with the stuff I've got and only having so much garage space, its getting a bit tight in there.
    Yesterday my son and I took our XJ out for a bit of mountain fun. We went shooting to test out his new M&P9 and the target holder system I welded up for him. I found a 10'x10'x1" plate at the metal surplus yard that would be a perfect target. And then we took the XJ up a trail that he wanted to explore. It was a nice challenge as it was fairly rocky and snow covered in spots. we climbed up to about 8500ft elevation and then decided that because we were alone and had no winch (still need to get that too) and it was getting late in the day, that we should probably turn around before we get ourselves into trouble as the trail was getting steeper, more rocky and deeper snow.
    Anyhow, great video Nate! Love your stuff and this build. The J10 is getting better and better each time we see it! Thanks for the content!

    • @natebleepinjeep9564
      @natebleepinjeep9564 5 ปีที่แล้ว

      Thanks Chas! A welder is a very important tool. The amount of satisfaction you get from building projects yourself is so valuable! It sounds like you got a sweet deal. I'm glad you hear your enjoying the videos!

  • @KJsProjects
    @KJsProjects 5 ปีที่แล้ว +1

    Subtle, I like how it looks almost as if it came on the Jeep stock, but then you notice your personal touch.

  • @xMikeLynchx
    @xMikeLynchx 5 ปีที่แล้ว +2

    That bumper looks great!

  • @rareearthfab5511
    @rareearthfab5511 5 ปีที่แล้ว +1

    Another great video. Sliders came out great. I have made a bunch of sets for my Jeeps in the past. Time in the shop is where all my worries disappear for awhile and projects like this are just a lot of fun. By the way. My JD2 model 32 is one of the best purchases I’ve ever made!

    • @natebleepinjeep9564
      @natebleepinjeep9564 5 ปีที่แล้ว

      Thanks Rich! I really like mine aswell!

    • @rareearthfab5511
      @rareearthfab5511 5 ปีที่แล้ว

      Nate Bleepinjeep hey, check out the Trajan Q700 / Q1400 carbide saw. I have a the Q1400 and it was worth every penny. I see a lot of cuts you’re making with the cut off disk that this would make quick work of and it leaves a real nice square edge and the metal stays cool. I never expected it to work as well as it does. Fab On!

  • @TheBeardedJeeper
    @TheBeardedJeeper 5 ปีที่แล้ว +26

    I need to get a welder of my own so I can do some more welding and learning to fabricate. Just need money first. Those turned out great!!!

    • @mattclark8483
      @mattclark8483 5 ปีที่แล้ว +5

      I got one I would give you if you want man, its a basic mig welder, gas or gasless.

    • @TheBeardedJeeper
      @TheBeardedJeeper 5 ปีที่แล้ว +1

      Matt Clark that would be awesome man are you sure?

    • @mattclark8483
      @mattclark8483 5 ปีที่แล้ว +3

      @@TheBeardedJeeper Im not using it, its all yours

    • @TheBeardedJeeper
      @TheBeardedJeeper 5 ปีที่แล้ว +1

      Matt Clark you rock thank you

    • @pra3t0rian
      @pra3t0rian 5 ปีที่แล้ว +2

      The Bearded Jeeper invest in a 220 volt model and gas from the beginning. You’ll thank me.

  • @Rick-4552
    @Rick-4552 5 ปีที่แล้ว +1

    That J 10 is a awesome old truck !

  • @markmatisko5733
    @markmatisko5733 3 ปีที่แล้ว +1

    It's called a compound miter.. good work on the build. Impressive tool list you have. Jealous of your garage space. I've build roof racks and sliders and all kinds of other projects with the cheapest harbor freight welder , bender,.. a grinder and a few magnets and sets of clamps. I had a drill press also but never had a dimple die..

  • @timbrandhorst6328
    @timbrandhorst6328 5 ปีที่แล้ว +2

    The fabrication series has a really good tutorial on bending tubing it’s really helpful with the beginner bender

  • @klauserat8534
    @klauserat8534 5 ปีที่แล้ว +1

    you are a awesome fabricator, we LOVE getho ass techniques since most of us are in the same situation, really like it

  • @erniestanger6613
    @erniestanger6613 5 ปีที่แล้ว +1

    I decided i wanted to get into fab work in order to do stuff like this. I work at a structural steel fabrication shop and its basically this on steroids! When 1/4 inch plate looks like sheet metal lol. Another great video Nate!

    • @natebleepinjeep9564
      @natebleepinjeep9564 5 ปีที่แล้ว +1

      Thanks man! Sounds like my kind of place!

    • @erniestanger6613
      @erniestanger6613 5 ปีที่แล้ว

      @@natebleepinjeep9564 Yeah youd probably like it! We do everything from bridge work to public transportation shelters at train stations and bus stops. I gotta say i love what i do!

  • @jimwhitman5805
    @jimwhitman5805 5 ปีที่แล้ว +1

    Really like those sliders! I'm older and my truck sit a bit higher so I was leaning towards those flip style sliders Metal Cloak has for the Jl/JK. I figured it would help my wife & I getting in, also allow the granddaughter to climb in by herself. I popped for a low buck mig to get the basic of welding and found my youngest (at the time ) had the talent. I went out again a bought a low buck plasma cutter and watched all my sheet metal get cut up in the boys projects. Your right about jumping in and keeping cost low. We run our equip off of our big genny so Mom doesn't get a $$ surprise. LOL

  • @leakey9645
    @leakey9645 5 ปีที่แล้ว +4

    I’m not sure what it is but I love your videos Nate. The shots you get are great and the information itself is extremely helpful. Keep it up!

    • @natebleepinjeep9564
      @natebleepinjeep9564 5 ปีที่แล้ว

      Thanks Taylor! I appreciate the positive comment bro

  • @2bad1
    @2bad1 5 ปีที่แล้ว +2

    I’d love to have that old jeep

  • @hawkie333
    @hawkie333 5 ปีที่แล้ว +1

    I always like your vids on this channel, Nate. You’re probably the most into fab, which always cool to watch!

  • @DrHavok1
    @DrHavok1 5 ปีที่แล้ว +1

    HOLY SEA BISCUITS!! I LOVE WHAT UR DOIN!

  • @georgeeads8689
    @georgeeads8689 5 ปีที่แล้ว +1

    Very well done. Matches the bumper really well.

  • @WeekendHandymen
    @WeekendHandymen 5 ปีที่แล้ว +1

    Thinking about buying a JD2 bender. What size and radius dies do you recommend getting? I'd like to choose wisely since theyre not cheap

    • @natebleepinjeep9564
      @natebleepinjeep9564 5 ปีที่แล้ว

      I have a 1 1/2" and 1 3/4" I can't remember the radius. 5" I think

  • @WeekendHandymen
    @WeekendHandymen 5 ปีที่แล้ว +1

    What are you using for cutting fluid/paste on the drill press?

  • @willhall4371
    @willhall4371 5 ปีที่แล้ว +1

    Nice work. Looks sweet.

  • @cidadaodorense3231
    @cidadaodorense3231 5 ปีที่แล้ว +3

    Liked the sliders a lot. Something I noticed is that you welded the flat bar on the bottom of the tube, I guess I was expecting it to be on the top like in a step. So, with the extremes bent up and the dimples protruding up, isn't it goint to retain watter, mud, snow? No place to drain is what I am thinking, I guess. Love the built, cheers from Brazil.

    • @natebleepinjeep9564
      @natebleepinjeep9564 5 ปีที่แล้ว +1

      There is a small gap between the plate and the tube that water and what not can drain through. But yes some rocks and stuff will get caught in there. Thanks for watching!

  • @j.sallinen25
    @j.sallinen25 5 ปีที่แล้ว +1

    Nice work.
    My only question is have you thought about the articulation of the frame when you're wheeling? I've seen some trucks flex when going over obstacles the bed moves separate from the cab.

  • @ericcross8909
    @ericcross8909 5 ปีที่แล้ว +1

    I'm happy to see that fsj back. I have been wanting to make some sliders for my wagoneer and now I think I'm going to do it. They looked pretty good. Nice job!

    • @natebleepinjeep9564
      @natebleepinjeep9564 5 ปีที่แล้ว

      Thanks Eric! I hope this video will help you in some way with your slider project

  • @boothienz8021
    @boothienz8021 5 ปีที่แล้ว +1

    They turned out great. Top job!

  • @mikep95133
    @mikep95133 5 ปีที่แล้ว +1

    You are a craftsman Nate !! You have mad skills my friend !!

  • @scottrobertson988
    @scottrobertson988 3 ปีที่แล้ว

    Looks great, awesome job. Think I'll throw some on my commander when the bumpers a finished.💪👏

  • @cole33333333
    @cole33333333 5 ปีที่แล้ว +1

    they look great and 2x4's are a method of measurement in my shop too.

    • @natebleepinjeep9564
      @natebleepinjeep9564 5 ปีที่แล้ว

      Thanks man! Lol glad to hear I'm not the only one

  • @haresplitter
    @haresplitter 5 ปีที่แล้ว

    You just gave me the design that I think will look good on my Trailduster.

  • @beersngearz781
    @beersngearz781 5 ปีที่แล้ว +1

    Pretty slick

  • @jrpefx
    @jrpefx 5 ปีที่แล้ว

    I like your SWAG method. "Scientific Wide A** Guess" We used the same when making roll cages for stunt cars and trucks. Good Work. PS I like your shop space.

  • @GrantRTanner
    @GrantRTanner 5 ปีที่แล้ว +1

    Those are awesome! Very nice work.

  • @ericvansplinter8275
    @ericvansplinter8275 5 ปีที่แล้ว +1

    So...you never did tell how you drilled the frame for the top holes on the brackets! And about that why not weld the brackets to the frame? Is bolting a stronger method or is it just so you can take them off later? Thanks for the videos!

    • @natebleepinjeep9564
      @natebleepinjeep9564 5 ปีที่แล้ว

      Your right! I have to edit out alot in order to make the video short enough for people to watch it lol. I used a small right angle drill to drill a pilot hole from the outside. Then I drilled it full size from the inside of the frame. I dont usually weld this kind of thing to the vehicle. I like to have easy removal in the future!

  • @onlyychevys
    @onlyychevys 5 ปีที่แล้ว +1

    I love this build, thanks for sharing! I would have built the old man step now days.

  • @dandahermitseals5582
    @dandahermitseals5582 ปีที่แล้ว +1

    Must be nice to have a warehouse sized shop.

  • @Tater79bj
    @Tater79bj 5 ปีที่แล้ว +34

    If you don't fill the tire of that CJ up, I'm gonna road trip over there and do it for you...

  • @paulquagge3432
    @paulquagge3432 2 ปีที่แล้ว

    Awesome work Jake, Thanks for putting these out!

  • @Lizzardlord6
    @Lizzardlord6 5 ปีที่แล้ว +2

    Anyone else catch the Bender sticker at 6:19? Love this build!

  • @wannago2moab
    @wannago2moab 5 ปีที่แล้ว

    Wow 33... I remember when I was your age 3 years ago. Lol good call on ditching the old man step idea. If nothing else it will make you feel better about yourself. Sliders are awesome. Keep it up man!!!

  • @scottgephart9749
    @scottgephart9749 5 ปีที่แล้ว +1

    I think it turned out really good, and the dimples add a nice lil touch. For those of us that have a unibody, do you think we need to add frame stiffeners before adding rock rails?

    • @natebleepinjeep9564
      @natebleepinjeep9564 5 ปีที่แล้ว +1

      I personally would add stiffeners but I know that there is multiple schools of thought on this. I would want to make sure I don't end up with something that's hard to repair because I ripped holes through the unibody.

    • @scottgephart9749
      @scottgephart9749 5 ปีที่แล้ว

      @@natebleepinjeep9564 thanks, Nate. I appreciate your response and your honest opinion.

  • @jeffnewland6049
    @jeffnewland6049 5 ปีที่แล้ว +1

    Awesome job. Looks great.

  • @robpedrow9293
    @robpedrow9293 5 ปีที่แล้ว +9

    I wouldn't want to clean the mud, sand, salt, etc. out of those with that plate on the bottom, but nice work Nate in a short amount of time...they do look good!

    • @jshug1103
      @jshug1103 5 ปีที่แล้ว +5

      I though that as well, love the look but some half circles at the base of the plate would allow debris to wash out.

  • @chopfather2730
    @chopfather2730 5 ปีที่แล้ว +4

    How about cutting half way through the plate then bend it and go over it with a bead of weld.? Anyway looks good

  • @danlarkey2799
    @danlarkey2799 5 ปีที่แล้ว +1

    Hell yes brother was just thinking the other day it’s been awhile since a video on my favorite TH-cam has dropped then boom here it is! Keep the the killer work

    • @natebleepinjeep9564
      @natebleepinjeep9564 5 ปีที่แล้ว

      Thanks for the positive comment Dan! I appreciate it man

  • @jameshall4385
    @jameshall4385 5 ปีที่แล้ว +1

    great looking rock sliders

  • @victor-emmanuel7485
    @victor-emmanuel7485 4 ปีที่แล้ว

    What a cool looking truck!

  • @Garth2011
    @Garth2011 5 ปีที่แล้ว +2

    Nice design. Maybe an inch farther away from the lower rocker so debris doesn't get caught between the rail the and the body. Front bumper looks great.

    • @AudioFreqx
      @AudioFreqx 2 ปีที่แล้ว

      Tradeoffs.
      It is relative.. larger gap can also mean larger debris.

  • @metalhead4x448
    @metalhead4x448 5 ปีที่แล้ว +1

    Look nice man.

  • @hellbender1100
    @hellbender1100 5 ปีที่แล้ว

    The truck looks awesome even if she has some body damage and rust

  • @johnmunder7107
    @johnmunder7107 5 ปีที่แล้ว +1

    Those look great man. You did a good job!

  • @Str8sixfan
    @Str8sixfan 5 ปีที่แล้ว

    I don't know what we'd do without bleepinJeep-Nate...I'd love to be help for you for a day. Would be fun to fabricate with ya!

  • @MoMo-ow7ez
    @MoMo-ow7ez 3 ปีที่แล้ว

    Great work really enjoy watching it ❤

  • @independentcontractor1633
    @independentcontractor1633 5 ปีที่แล้ว +1

    One of my favorite builds on TH-cam! Whose dimple dyes are you using? Whose Metal brake please? Im.looking at the Harbor Freight brake at the moment. Great job on the bumpers and sliders!

    • @natebleepinjeep9564
      @natebleepinjeep9564 5 ปีที่แล้ว

      It's a brake from harbor freight. And the dimple dies are from ebay!!

  • @turnerrandolph4256
    @turnerrandolph4256 5 ปีที่แล้ว +2

    This is the best project on the channel. Great job! Any particular reason you left the 2x2 the length you did? I thought from the beginning that it would look nice just a little longer with a taper at the front and rear corners. Regardless they came out great!

  • @sportxlh1614
    @sportxlh1614 5 ปีที่แล้ว +1

    Looks great. Nice job!

  • @AttwoodsGarage
    @AttwoodsGarage 5 ปีที่แล้ว +1

    You didn't say how you sorted out drilling the upper holes, could you have swapped them to the inside of the frame? J10 looking good. Don't see any here anymore (salt Ohio).

  • @Mickale-Moranis
    @Mickale-Moranis 5 ปีที่แล้ว

    Nice setup, but I myself, to keep my side panels vertically straight and not wavy, place a tube farther out than the flare. Think of a ramp to allow the stump. rock face, tree to slide along then get into the tire sort of thing.
    As for the dimples, great to place under body/floor lights for that road glitter....or rock lights.

  • @mattryan9376
    @mattryan9376 5 ปีที่แล้ว +3

    Yeeeeees! Finally more J10 content!!

    • @ChasWG
      @ChasWG 5 ปีที่แล้ว

      Yes, love this build. Not a fan of Matt's JL stuff.

  • @stevectl1
    @stevectl1 5 ปีที่แล้ว +1

    Looks good, I'd be hard pressed not to dd that truck. What's your gear ratio in that? You planning to be able to run down the highway.

    • @natebleepinjeep9564
      @natebleepinjeep9564 5 ปีที่แล้ว +1

      Thanks! I'm not sure on the ratios. I will be opening up the diffs to find out soon. I will definitely be planning on driving this on the freeway

  • @serinehart
    @serinehart 5 ปีที่แล้ว +4

    Really enjoy your video's. Nice sliders but not sure about those old man cracks, Lol, old guys like to have fun to. whats up with the CJ in the back ground, looks pretty clean. Keep up the video's and this old guy will keep watching.

    • @natebleepinjeep9564
      @natebleepinjeep9564 5 ปีที่แล้ว

      Thanks! I'm glad your liking the content. It's a 1960 CJ that I picked up for a really good deal. I haven't decided what to do with it yet so it's just a shop decoration for now!

  • @Steve-od2di
    @Steve-od2di 5 ปีที่แล้ว

    Looks like some nice welding magnets would help with the holding.

  • @kyhillbillys10
    @kyhillbillys10 5 ปีที่แล้ว +1

    What size square tubing do you recommend for a rock slider for a lighter weight rig like a yota? I plan to also mount a cage off it also

    • @natebleepinjeep9564
      @natebleepinjeep9564 5 ปีที่แล้ว +1

      I like 2x2. Gives you some room to weld a 1 3/4 tube to it.

  • @christerfer409
    @christerfer409 4 ปีที่แล้ว

    Looks good, I would buy them.

  • @cesarmg4642
    @cesarmg4642 2 ปีที่แล้ว

    Nice job. I also started welding and fabricating some time ago. Great experience! I hace a question, I live in Mexico and here you cannot get tube (cromoly tube) if I use exhaust pipe the bender can do the job?? I bought the bender without knowing the difference between pipe and tube and without knowing that here you cannot find tube 😢. Regard’s!!

  • @larryalexander4833
    @larryalexander4833 5 ปีที่แล้ว +1

    Good tips on angle with table

  • @durhamholtmeier4413
    @durhamholtmeier4413 5 ปีที่แล้ว

    How about a set of m715 Kaiser fender flares ...being the same truck and all. Great project by the way

  • @thecatfelix2988
    @thecatfelix2988 5 ปีที่แล้ว +1

    nicely done!!👍

  • @michaelogrady2867
    @michaelogrady2867 4 ปีที่แล้ว

    Great video. A few questions so I can do the same. 1) What was the thickness of the tubing - 1/8"? How did you attach your 4x4 plates to the frame? We saw you drill holes. Did you go all the way through both sides of the frame and bolt the base plates to the frame? Di you use rivnuts in the holes you drilled on the outside of the frame? Or, something else? Thanks

  • @scottadvevture2022
    @scottadvevture2022 5 ปีที่แล้ว

    still looks like they will work out nice

  • @SWBCrawler
    @SWBCrawler 5 ปีที่แล้ว +77

    Anyone can build these. After they get a bender, press, welder, and dimple dies.

    • @TheKajunkat
      @TheKajunkat 5 ปีที่แล้ว +4

      If you can do without the dimples you can just buy pre bent tubing from roll cage kits and weld together.

    • @onlyychevys
      @onlyychevys 5 ปีที่แล้ว +10

      You might be surprised what you can build without all of the expensive tools.

    • @SWBCrawler
      @SWBCrawler 5 ปีที่แล้ว +8

      I build without all those tools (except the welder) all the time. Not to say I wouldn’t use a bender if I had one. I was just commenting on the title of this video. Not just anyone can build these. Anyone with all these tools can.

    • @mattclark8483
      @mattclark8483 5 ปีที่แล้ว +11

      @@SWBCrawler If your going to go down that path then your also saying that he was derogatory against blind people or handicapped people. What he meant was you don't have to be a fabricator to build these, buy a few harbor freight tools and you can start fabbing up bumpers and sliders and what not. He wasn't literally saying any human being on planet earth can build rock sliders.

    • @TheMaddog809
      @TheMaddog809 5 ปีที่แล้ว +4

      yep, just like anybody can go to space....if they own a rocket...bottomless pockets etc

  • @docslinux2
    @docslinux2 5 ปีที่แล้ว

    If your Northern Tools welders is the Klutch line do a review of it, please, I've been kicking around the idea of buying one, I want your opinion of it.

  • @vipstash
    @vipstash 5 ปีที่แล้ว

    Awesome video man. I'm getting my stuff for my g5ranger

  • @maxst2
    @maxst2 5 ปีที่แล้ว +2

    built 2x6 and tube sliders for my WJ (cut out the rockers), nothing but a welder and an angle grinder...

    • @natebleepinjeep9564
      @natebleepinjeep9564 5 ปีที่แล้ว

      Nice!

    • @maxst2
      @maxst2 5 ปีที่แล้ว

      @@natebleepinjeep9564 yeah...looked at the cheap jeep series for some tips too!

  • @bearfarmer
    @bearfarmer 5 ปีที่แล้ว +1

    Great job!

  • @JEEPINJUSTIN
    @JEEPINJUSTIN 5 ปีที่แล้ว +1

    Looking good. FSJ!

  • @themanthelegend7048
    @themanthelegend7048 2 ปีที่แล้ว

    Silly question. Is a flux core welder good enough to make sliders? It's all I got.

  • @Abstruseish
    @Abstruseish 5 ปีที่แล้ว +1

    Anyone else want to see that CJ5 get freshened up? New rubber, any needed rust repair, holley sniper efi upgrade if it's a 258, ect.

  • @bridgerjohnson9632
    @bridgerjohnson9632 5 ปีที่แล้ว

    Hello Nate!!! I’m new to this Chanel. Actually this is the first video I’ve watched if yours! I was planning on making my own rock sliders but I wasn’t sure where to begin. Now I’m gonna build one very similar to this!! My only questions regard how the whole thing mounts. My concern is drilling holes in the Frame. I am not sure if it is better to drill holes and bolt it or to just weld the damn thing on there. What would you suggest?

  • @Jursaw
    @Jursaw 5 ปีที่แล้ว

    These came out great man! Wish I had the space to work like this. Have all these tools besides a brake and a pipe bender! I want to do this to my toyota pickup

    • @bridgerjohnson9632
      @bridgerjohnson9632 5 ปีที่แล้ว

      Jursaw my shop doesn’t have a brake either. What we do is we cut the strip to length and cut a slot where the bend is going to be leaving about a inch from the end of the cut to the end of the metal. That way you can basically bend it with your hands. It makes it way easy to get the bend exact. Then we run a bead over the slot we cut to hold the angle. Another tip would be using crescent wrench’s to grab on the Metal for more leverage when bending it

    • @Jursaw
      @Jursaw 5 ปีที่แล้ว

      Bridger Johnson Johnson I can see how that would work well

  • @austine4784
    @austine4784 5 ปีที่แล้ว +1

    Can you teach us how to do a cheap way to do major rust repair? Cheap but right

    • @natebleepinjeep9564
      @natebleepinjeep9564 5 ปีที่แล้ว +1

      Not a bad idea! It wont be for awhile unfortunately, I have many videos and projects that will need to come first

    • @austine4784
      @austine4784 5 ปีที่แล้ว

      @@natebleepinjeep9564 cant wait to see what you do next!

  • @Edruschitz
    @Edruschitz 5 ปีที่แล้ว +1

    What type of tubing bender do you have, I am looking to purchase one soon and really like the look of yours.

    • @natebleepinjeep9564
      @natebleepinjeep9564 5 ปีที่แล้ว

      It's a JD2 bender with a air over hydraulic ram. It's been a great upgrade from the harbor freight bender I've had for years

  • @danhambrick6331
    @danhambrick6331 5 ปีที่แล้ว +6

    Nate sure does bring some skill to this channel....just saying...

  • @ViperGibson
    @ViperGibson 5 ปีที่แล้ว +1

    Seeing that you didn't paint the bumper or the headache rack I think what you should do is let the raw metal rust a little bit and then clear coat it to match the persona of the truck and the same with when you do the rear bumper

    • @natebleepinjeep9564
      @natebleepinjeep9564 5 ปีที่แล้ว

      I like this idea and I have considered it. I'm not sure what my plan is for paint yet. I keep going back and forth

  • @Turrnaroud
    @Turrnaroud 5 ปีที่แล้ว +1

    so i see you struggling with the bending on that dimple piece. try using just a propane torch to give it a little heat. should bend much easier.

  • @nathanzavala4288
    @nathanzavala4288 5 ปีที่แล้ว +1

    Not that it matters but I’m more of a stick welder probably more expensive idk but mig welding is great as well

  • @MrAndysk1
    @MrAndysk1 5 ปีที่แล้ว +1

    I built some bolt on rails for my JK, would have loved to use a dimple die for mine!

    • @natebleepinjeep9564
      @natebleepinjeep9564 5 ปีที่แล้ว

      A dimple die is a great to to have in your arsenal! They aren't very expensive and well worth the investment

  • @porkyswelding
    @porkyswelding 5 ปีที่แล้ว +1

    how about a collapsible rack in the back for the boat and stuff? fold down or quick release, anyway nice job.

    • @natebleepinjeep9564
      @natebleepinjeep9564 5 ปีที่แล้ว +1

      Cool idea! Thanks

    • @tortron
      @tortron 5 ปีที่แล้ว

      I made a second matching headache rack that bolts in at the rear end of the tray. I then remove some alloy tubing between them and can throw a tarp over the top for camping. Holds a kayak well too

  • @Kriegsbeil5577
    @Kriegsbeil5577 5 ปีที่แล้ว +1

    Don't tell Matt, but i think your videos are better, Nate!

  • @jasongozy6264
    @jasongozy6264 5 ปีที่แล้ว

    nice vid. thanks. i think i will attempt to make my own for my xj. got to beat paying 400 for one. i can spend 400 on tools instead.

  • @NigelNaughton
    @NigelNaughton 5 ปีที่แล้ว +1

    You don't need a helper...you need some magnets! ;-)

    • @natebleepinjeep9564
      @natebleepinjeep9564 5 ปีที่แล้ว +1

      Lol yes I do. The magnets I have aren't very strong. I would use magnets alot more if I had some that weren't from harbor freight

  • @danielantoniozd26
    @danielantoniozd26 5 ปีที่แล้ว +1

    dAmn i lOve this build

  • @LMC-Offroad
    @LMC-Offroad 5 ปีที่แล้ว +5

    He’s got Bender on his bender 😂

  • @TJDukit1
    @TJDukit1 5 ปีที่แล้ว +1

    You should check out Colinfurze video on his homemade break. Really solid build

  • @macsogandares8383
    @macsogandares8383 5 ปีที่แล้ว

    Did these ever come with a PTO? That's something else you could do with the rear bumper

  • @docslinux2
    @docslinux2 5 ปีที่แล้ว

    Nate do a shop overview, tools and uses kind of thing

  • @ktmrider2026
    @ktmrider2026 5 ปีที่แล้ว

    Look really nice but seem that it's gonna be a perfect spot to catch mud and dirt....
    Also, that truck really needs bigger tires or less lift