19 Metal Fabrication Tips and Tools For Beginners
ฝัง
- เผยแพร่เมื่อ 3 ส.ค. 2024
- We have a ton of fabrication tips and tools to cover today! Believe it or not, I had a list of 34 tips but decided to cut it down to 19 for time. I have many questions from first time fabricators and want to try and tackle some of these questions in this video... Plus a couple extra tips that I think are valuable!
I hope that if you're new to fabrication this video can serve as some motivation to start building things yourself! The satisfaction of building something from raw materials is difficult to get anywhere else! No better time then now to start growing your skills!
AMAZON ITEMS!!! www.amazon.com/shop/dirtlifes...
(Amazon Affiliate Links)
BARNES 4WD COUPON CODE: "dirtlifestyle" 10% off
NORTH RIDGE 4X4 CODE: "dirtlifestyle" up to 20% off www.northridge4x4.com
EMPIRE ABRASIVE CODE: "dirtlifestyle" 10% off lddy.no/qf79
YANKUM ROPES CODE: "dirtlifestyle" bit.ly/yankumDL
ONX MAPS: webmap.onxmaps.com/account-pu...
MIDLAND RADIOS: bit.ly/2IjmlZD
STEP 22:
EVOLUTION POWER TOOLS CODE: "dirtlifestyle" store.evolutionpowertools.com/
JOOLCA HOT WATER HEATER: bit.ly/37qLgEp
Shirts & Hats on our website!!
www.thedirtlifestyle.com
Support us on Patreon! / dirtlifestyle
Follow me on social media!!
Instagram: / dirtlifestylenate
Facebook: / dirtlifestylenate
DISCLAIMER:
Due to factors out of the control of Dirt Lifestyle, we cannot guarantee against improper use or unauthorized modifications of this information. Dirt Lifestyle assumes no liability or responsibility for property damages or injury incurred as a result of any information contained in this video. Use this information at your own risk. Dirt Lifestyle recommends safe practices when working on vehicles and/or with tools seen in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Dirt Lifestyle. Be safe!
This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission.
#fabrication #fabricationtools #metalfabrication - ยานยนต์และพาหนะ
Nothing wrong with jamming out with ear buds while working I think it makes it more enjoyable
If it's for work rather then hobby I'd highly recommend 4 grinders, two smaller and two big boys. It really saves on time not having to switch between grinding and cutoff wheels all the time.
5 grinders 1flap wheel 1grinding stone 1 cutoff wheel 1 wire brush. Add a 7" grinder for big jobs.
Get you nice pair of knee pads! Makes a world of difference after working on the ground or floor for extended periods.
FishHead I have seen guys wearing those doing floors and things. I get to work early before them sometimes and gave those pads a better name. I wrote Hollywood Sandals on the front. Nice yes ?
I was thinking the same thing! Years of flooring wrecked my knees.
@@glutenfreegam3r177 Yes get some Hollywood Sandals. The guys in Hollywood know protecting their knees when on them a lot is important. They just call them sandals.
I really like the “skateboard” knee pads. The hard plastic cap is great for slamming into things and slides easily on concrete as well.
I thought they were used to get a raise at work. Go figure.....
I buy a tape measure nearly every time I go to the store. I go from neck deep in them to none almost immediately. They disappear faster than 10mm.
Lol I know your pain
I'm the same. I am just starting get into fabricating but I learned from years as a carpenter to leave a tape measure clipped to the stand of my saw. I literally trained myself to measure something at the saw and immediately clip the tape measure back on the saw frame. That was a result of getting distracted in my shop, setting the tape measure down in some random area and then spending the frustrating 15+ minutes retracing my steps to find it. Not an efficient way to work at all.
10mm what's that? I've never seen one
@@colteng9721 10 mm socket , the most common bolt on an a car engine bay or an engine
Tape measures and chalk (soap stone) seem to go missing more than anything for me
Make More videos like this! It’s exactly what I was looking for to start fabricating
Glad to hear it!
Dude - awesome video. Thanks for posting. Engineer in Australia here. Brazing: Also deadset awesome for cast iron crack repair. Love your work, and again - thanks.
Can’t thank you enough for these videos you’ve motivated me to build my first bumper and I’m pretty proud of it for the money spent.
No problem! I'm happy to help give you some inspiration 👍
About a year ago....I was drawn into videos on metal fabrication after all the years of cars being my first love.....since I was 7 years old....all the cars shows I have been to over the years.....finally I was asking how did they do that ? Well after my first metal fabrication video on you tube I am addicted......now I can't get enough of metal fab videos.....and today I found your site. Your tips make a great addition.....and thanks for a fine channel.
Im just here for the futurama stickers on your tools. Nibbler and bender were funny.
Lol thanks! Glad you enjoyed the subtle humor
Me too. Noticed that Nibbler sticker right away.
Dimple Dies are a *must* when putting holes in any stressed member.
I've seen so many people 'speed hole' parts to have them crack/shear later on through creating stress risers. Dimple Dies help the holes act as 'stress confusers' and help alleviate concentrations. Otherwise, don't speed hole anything that's stressed. Its not worth the risk.
Great list!
Hi Nate - If you use your floor for marking out, try installing either "Drop-In Anchors" or "Lag Shields" (female bolt usually chemically set into concrete). They can turn your whole floor into a massive Fixture Plate by bolting jigs, clamps, frames, straps etc. Use them as a Datum (known reference point) for measuring and setting out. Keep countersunk or low profile bolts in them when not in use. (edit this bit - Also, a mobile vice stand can be secured for use, then put away when finished)
That is an amazingly good idea!!!!!! Thank you.
A lag shield is neither a bolt nor chemically set into concrete. It’s a zinc alloy or lead alloy that anchors by expansion when a lag is installed.
Your fixture locating ideas are great though.
@@fishhuntadventure Hi fushhuntadventure - thanks for your reply. You are correct about lagshields expanding. My chemset reference was for the drop in anchors and I neglected to say expanding lagshield. I'm sure you know there are a lot of varieties for concrete anchors and bolting methods - I did not want to write an essay about it though.
great video. I laughed when you mentioned the tape measures. I do the same thing. I used to fabricate body panels. Loved it. Miss it at times. Last winter I took my 85 4 runner into my shop. And a buddy and I rebuilt/ beefed up the axles. Put a 4" lofty on it. I bought budget yet beefy parts. Some things needed to be "adapted". While others needed to be fabricated. Was a LOT of fun. It performed pretty good at EJS. Many tips, I already knew. Some refreshed my memory. Others, I hadn't thought of. I see videos like this, then wonder about the losers that give it thumbs down. Lol
I agree on the Air chisel / air hammer. It can be used for pretty much anything... cutting out old metal (I've used it up to 3/16 thick steel) or if you have a old balljoint/tierod end or anything that is press fit, you can use to the air chisel to break it loose or just push it all the way apart. Not to mention I replaced a steering intermediate shaft on an old Dodge, and they are held in with pins, that you can't drive out with a hammer because there isn't enough room to swing.... AIR CHISEL to the rescue.. Its my new favorite tool lol.
I agree in all the "small tips" they do actually make a huge difference
I also use self leveling cross beam lasers, level laser, and digital tape measure, all items to make layout so simple.
The ear buds are a great tip. I have tinnitus from working around loud noises for over 25 years and ringing in my ears can be a distraction when working in the shop. I play music to cover the ringing but when wearing hearing protection the ringing is even more prevalent. Ear buds would definitely help drown out the ringing when spending a lot of time with the earmuffs on.
When I was a fire watch for my Boo when he was a pipe fitter he used a porta-band saw and the lasers all the time. I know the porta-band was one of his favorite tools. Great video Nate!! Super helpful tips! ❤️🐞
Thank you!
So I just listened to a podcast with Ryan Hussey who works for a R&D lab. Acetone, even tho it's clean and evaporates, leaves a film on the material. Not really a problem for mig or stick but could be for a highly critical job. Just food for thought. Great channel man! Keep posting these sweet vids!
More grinders! Whenever HF is having a big sale, and 4” grinders are $10-$15. Buy a couple. I have a grinder for each type of disc I use. Because they are cheap, when they poop 💩 out, I just throw them away, and get another one later. Also always look for tools at estate sales. You can get some great deals that way.
100% agree! I'm an estate sale junkie. And I have 7 grinders...on the hunt for another large one. What do you do about cord management? I'm this close to biting the bullet and writing a big check to buy 6 cordless grinders.
DrewT I have plans to build a welding table. I will have a 4 plug outlet permanently mounted to the side of the table. But until that happens. I just unplug and plug in each one as I need it.
@@joecarmean1079 Cool beans. I have a power strip on my table too, but it seems my cords are always entangled. Drives me nuts!
Knowledge like this is being spread/shared through media and in the past, it was withheld as industry secrets.
Yay - nay fantástico
I’ve been meaning to pick up a nibbler, but the two tape measures tip got the sub. I have six full size tape measures, all numbered, for the exact same reason. Also have a bunch of smaller measures. On the casters tip, use two fixed and two swivelling, MUCH more stable.
Earbuds, YES! Kept me sane when working for days solo.
Great reminder about jigsaw. I have metal blades for it....but I've always forgotten that it can be used to cut steel. I love the brake tool....for bending or rolling steel. Never realized you could get one for such a low cost.
Been doing this stuff for decades, I still like watching your stuff. Thanks, keep at it!
As a Maintenance Carpenter who also welds, I was across many of these tips but not all which is why I watched the video, there is always one or more tips to learn or remember.
Me too.
Same here, retired carpenter, love working with steel
I absolutely love watching your videos I'm a junior fabricator I'm trying to learn everything I can for a Bronco build and an ATV build for my daughter and myself. I love the tips and tricks that you give out I love watching your videos Stop giving haters spotlight. Who cares what they do or don't like you do amazing work
GREAT STUFF! I ALWAYS START WITH CHALK-LINING THE THE AXLE LINES IN ACTUAL, FIRST. THOSE TWO PARALLEL LINES IN ACTUAL PROPORTION MAKE ME THINK "WITH THE END IN MIND".
The more I dig into this channel, the more I love it. You do an incredible job in every single video.. Thank you for giving this to enthusiasts like me who want to learn and have never had a mentor or a buddy to show us how things are done.
Thanks man! Happy as hell to have you aboard 😁
Thank you, I've been fabricating things for myself for years and your video has shown me things that will help, like the doing the chalk line and drawing the prebuild on the floor and then spraying clear over it. Great ideas. I've learned living in Louisiana where we have tons of Dirtdobbers that will build in the inlets of your air tools to put valve stem caps on the air inlets on all my air tools or use electrical tape to cover holes
I definitely am a fan of multiple grinders! I have different wheels (thick grinding wheel, wire brush, flap wheel, and cutting wheel) attached to each one so I don't have to change them out.
The video is fantastic! A lot of great information. Keep updating the videos.
Quick add on to the "2 tapemessures tip" when you get your second tape check it with your first, some tapes read slightly different so it will save you a headache and material, and yes I learned this the hard way lol
Dylan Bennett so true !
thank you for taking time and sharing your knowledge. love you videos!!!!
Great content - half the list are my own best practices, and I picked up a few as well. I do totally different things with my shop, but you can always learn from someone else!
Top Shizzle! your last topic made my day!!! pre bend tubing to do a fast mock-up!! so simple yet so effective!
There is SO much awesome info in here! And not just for beginners...
I discovered the Speed Square this year, I now find me using it daily!
Thanks again, cheers Aaron.
Thanks man! Very happy to see you enjoyed the video!
Super helpful. Thanks for putting this together.
You have decades of experience! Thanks for sharing. Never saw a nibbler before.....gotta get one!
Good stuff! I went out and bought a second grinder, what a difference. Well worth it. Thanks!
Chalk line is a good one. We use them all the time In the ship yard, for layouts and stuff, and we clear over them as well. Good tip
Lots of great tips, man! And I agree 100%; ear buds have saved my life many a time! 👍👍
I'm not the only one? I need like 7 tape measures minimum for any project. I found one in the mailbox once after a project.
I actually have 7 on my workbench lol by the end of the project I'm always looking for one because they're all gone from where they are supposed to be. Best advice is bright colored green spray paint
The video is absolutely fantastic! A lot of great information. Keep posting such amazing videos in the future also.
WOW!!!! Great video!!! Thank you so much, didn’t think of a couple of those and I will be saving pennies and picking up some to help build my fabricating skills!!!
Keep up the amazing work!!!👍
Great video, during the quarantine after watching your videos. Decided to Learn to weld, bought a little 110 buzz box, and putting it on casters extremely helpful.
Thanks for sharing all your knowledge
Learned a ton from this! Can’t wait to try some of this stuff!!
Huge thanks for the tips, I'll take as many free inside tips as possible. Stay up..
Love your videos. Been watching for a couple months. I've been slacking and need to catch up on some of your videos. Keep up the great work. Thanks for sharing with the TH-cam community.
Some great tips. I bought an air hammer for an axle removal on a UTV last year. It had a crush pin in it that had to be removed to get the axle off. Man did it work awesome!
Like this format of video. Thank you!
Awesome job! I consider myself fairly new to the fab work, but thankfully already figured out the benefits of a lot of those tools. Highly recommended!
This video was really well thought out and put together. Thanks for the content! Keep it coming!
Thanks man!
Can’t beat a set of high quality step bits too. Massive time saver.
Great video mate, appreciate putting the time in making, some top tips! Have been learning a lot from you lately!! 🤟
I'm happy to hear I can help! Thank you for watching!
A bandsaw has been one of the best tool I’ve bought for my shop!
Brazing 'swivel head' indispensable tool. Hey, thanks for such an EPIC trip with you , discussing some of your ' best friends'!
I agree on the ear buds, keeps me sane and protects hearing
Great tips Nate. Thank you for the lesson.
I like the welding rod trick. Wish I’d learned that a few years ago....
I have several tape measures. My 2 Dewalts 30 & 16’ both broke only using occasionally. Switched to Milwaukee and love them have 3 of those 12’ 16’ 30’. BIG TIP is to check each tape measure against each other so you know that they can be trusted during a project with a lot of cutting and accurate measurements in both wood, trim and metal.
Thank you a lot for this video. This is really very interesting and informative. Keep posting like those amazing videos, this is really awesome.
Use hair spray over your chalk line it wont rube off but can be washed off when your done
dave g and you can use it to keep your hair nice as you’re working.
Shellac. Cleans up with denatured alcohol
I second Hairspay even though I have no hair. You can wipe it off with a wet rag.
Cool welding rod tip, that would be great tip for fixing strut tower repairs.
Been watching your channel for a while now and just wanted to complement you on the quality of your product. I also do a lot of fab work, alone, with no assistance and can appreciate what effort you invest. Keep up the good work.
Thanks man, happy someone can recognize the hard work I put into these videos 👍
Use the belt clip on your tape , I always have one on my hip .Oh the humanity! I personally love the left to right reading tape ,great for layout at the saw as your not reading the tape upside down, and larger numbers for my old eyes. Cheers
No shit for the earbuds tip. I used to have a job that would have me doing one task for 8 hours a day. Hearing protection was required. I’d pop in my ear buds and start a long playlist. It helped me get through the day and made it enjoyable. I could sing as loud as I wanted and nobody could hear me. 😝 Great tip.
Lol thanks brother!
A great video and exceptional great content. Well-described information and helpful. Thank you so much for sharing this online. I will surely share this video with my friends.
A combination roller, shear, & break For The Win!!!! where have you been all my life? Never knew something like that existed. Going to the the top of my new tool list right now. Lover your videos and thanks for all the fab tips!
Good! I'm very happy to help 👍
Great video 👍🏽😎 lots of great info and content.
Simple and to the point. I like it. Subscribed.
love it i have every tool you mention and now you gave me more ideas how to use them . thank you
Thanks man! Glad you enjoyed the video!
Dude I just subscribed to your channel! This video in particular is incredibly useful for anybody who works out of their garage. Very well spoken, good cinematography, and deep meaningful content. Keep up the great work
As always your videos are top notch. You're a great teacher, Nate!
Thank! I really appreciate the kind words 👍
I think the line laser and dot laser are great tools for so many things. The axle alinement example you give is perfect to show this. I've used line lasers to layout for ceiling lights to make sure I get them perfectly aligned and a dot laser would be great to mark the center of the light to make sure they all get evenly spaced. I think it's perfect for your axle alignment!
Also being a tile love lasers, used them to find center wile three linking my first gen runner. Good tips bro, also the ear buds, took the idea from my dirt biking.
WOW, I am blown away by your tips. I knew some of them, but they are so clever and I can see how they can make fabrication more accurate with less wasted material and time and also improve quality. Thank you so much for sharing much of what you have learned. I am planning to watch all of your videos and have subscribed.
Thank you man! Happy to have you aboard!
Your tips rock!!!
I 100% agree with ever tip!
Thank you! Thanks for watching
It may be elementary but buy a good vise and a bench grinder as some of the first tools for fabrication. I have three 4 1/2" angle grinders and need at least another. Lots of tape measures, they hide from you! Pencils at every work station to jot down a spec. Masking or blue painter's tape to label parts, material lengths, measurements, orientations, etc. In my welding cart I have pencil, soapstone, china marker, silver sharpie (shows up on steel) grease pencil, and a sharp scribe (ground down screwdriver) all for marking, I hate having to put the tape and the workpiece down and go hunt a rule!
Great tips Nate! Now I wish my barely used Millermatic 211 was a 220 multi process!!!
As a self taught amateur I figured out tip 3 a couple years ago, certainly helped when fixing mistakes.
Love my jig saw, I love using old cars for their scrap metal and my jigsaw is what I use to cut everytime
Great video! Those just getting into fabrication, take notes! There are a lot of very useful tips here. I can definitely agree on listing to music while you work, I’m usually actually more productive when I have music playing during a project. It just really helps me stay focused and keep my projects moving along.
Thanks for watching brother 👍
Man awesome videos. These concept and procedure videos are the best!!!
Thank you! Happy to see you enjoyed it!
Just what I was looking for. Very nice.
Dude , u are the content king. Good job
Thanks brother!
Earbuds make my life so much better. I work in a welding shop where it's just me and the owner, and a lot of times it's just me working alone. This week my boss said he thought I was less productive with them in, and I don't think he has any basis for that, but whatever. I guess I'll have to "Play the game" for a while.
Great video! I have never done this type of work, but am interested in trying it. Super helpful. Thanks!
Brilliant video mate, love the handy tips. Particularly love the bits on the lasers
Thank you!
I just stumbled across your channel and subscribed! Great video and will be looking at more! Thanks man!
Excellent! Nice shop too!
Not a bad lists of tips from someone your age. Good job.
Someone really appreciates Moab. Thumbs-up on that ink and subbed for content quality.
It's my happy place lol. Glad to have you aboard 👍
Great video. I'm new to fabricating and you just cleared up alot of questions I've had about what I need to get started.
Thanks for watching! Glad to hear its helping 👍
Excellent list! Thank you
I run 3 grinders.... Grinding Disc, Flapper Wheel, Cutting disc.... life is good.
One more with a wire brush wheel.
Great video, very helpful.
This was priceless to me. Thanks!
Always use big casters and all four swivel.
This video earned you a new subscriber. I have most of the tools you suggest and you are correct about them. I have no reason to doubt you about the others. Excelent video.
Thanks brother! Happy to have you aboard 👍
Great video. The bits about layout (lasers, rulers, speed square, sample bends) were particularly insightful. Nicely done.
Thank you!
That nibbler is awesome! Always great videos and suggestions 👊