How To Restore and Protect Moldy Rubber Trim!
ฝัง
- เผยแพร่เมื่อ 8 ม.ค. 2021
- 📺Subscribe So You Don't Miss Stuff!
goo.gl/DzwJ9W
Become a member and join! It's not a big deal if you don't want to or don't like the idea of this, in fact, you're not missing anything important. It's like extras and behind the scenes stuff, you used to get when you bought a special edition DVD. Do people even still buy those? Well, join if you want extra stuff. If not...It doesn't really make a difference.
/ @mirandadetailing
0:00 Intro
🔗Check out the links below!
#0000 Fine Wool. amzn.to/38zl4a4
Green Tough Pad. amzn.to/2KUOAPo
Meguiar's D300 Compound. amzn.to/2KVfkz5
3/4 inch Yellow Tape. amzn.to/34I9vfh or amzn.to/34KYf20
Black Label Trim Coating amzn.to/3sQL4si
🧽🧪Tools and Chemicals
Chemical Guys Citrus Wash & Gloss amzn.to/2ypszRx
AM Foam bit.ly/2wO9pFf
Foam Cannon bit.ly/38FAc40
Super Clean amzn.to/2zbIS1H
Wash Mitts bit.ly/37oUUnz
Work Stuff Brushes. bit.ly/WorkStuffBrushes
Clay Towel. amzn.to/39pPk5C
Clay Bar bit.ly/2xngjRG
Iron Decon bit.ly/2WSbn1X
Another Iron Remover amzn.to/2UNEEbp
Jescar Powerlock amzn.to/2UrIRCV
Seal and Squeal bit.ly/2RSeVyl
DA Polisher amzn.to/2UGTYqq
Wax Pad bit.ly/2vUriBQ
Stoners Trim Shine Protectant amzn.to/2hpDgfH
Tire Dressing Silk Shine amzn.to/2xuC5Dt
Meg's Hyper Dressing bit.ly/37ugkAt
Myteelite II 8070 amzn.to/33SXMct
McCulloch MC1385 amzn.to/2ABFGwm
Vehicle Heated Dryer amzn.to/2JGFAsY
Ridgid Vacuum amzn.to/2i8Psyy
Casabella Brush amzn.to/2ErkKcK
Capri Air Blow Gun amzn.to/2i8pxqB
Detailer's Helper Belt detailershelper.com?aff=9
Detail Factory Ultra-Soft Brush amzn.to/2DahS7Q
Microfiber Towels amzn.to/2AESEK3
AutoMagic Hydro Shine amzn.to/2BpPDA4
303 Aerospace Protectant amzn.to/2Ad8r2l
Corrosion Technologies RejeX (Sealant) amzn.to/2zzwQBo
HDSpeed amzn.to/2xT3lGY
HDPoxy amzn.to/2T9mmCK
SPTA Polishers
Cordless 15mm DA Polisher. amzn.to/2SsMVkL
Or here s.click.aliexpress.com/e/_dZN...
Mini Polishing Machine Buffer Rotary Polisher Kit. amzn.to/2zR2Sej
Mini Detail Polisher Shaft, Car Foam Drill Polishing Pad Kit. amzn.to/2KR1kmD
SPTA 6'' 500W 21MM Variable Speed Orbital Polisher. amzn.to/2VZ4Im5
5'' 500W 15MM Variable Speed Orbital Polisher. amzn.to/2VWiYM0
3 Inch 10mm/700W 6 Variable Speed Orbital Polisher. amzn.to/2z6HnFJ
🐕Dog Hair Removal Tools
ANALAN Mini Pet Hair Remover. amzn.to/38x9Xjd
Lily Brush. amzn.to/2WaNJNz
Hoover Dog Hair Nozzle amzn.to/2BknvKO
Pet Hair Remover Stone amzn.to/2KYbNvu
Hoover Dust Brush amzn.to/2qMd3f9
🛒Huge Amazon Store with tools and products we use daily!
www.amazon.com/shop/mirandade...
Check out the link below and order some stuff!
carsupplieswarehouse.com?sca_ref=81745.BhlFvTbXDc
________________________________________________________
👕Visit our online store to purchase STUFF!
teespring.com/stores/miranda-...
⚫️Detailer's Cord Snaps!
bit.ly/3k0kk23
💻Visit our website for a HUGE list of tools and products we use! mirandadetailing.com/shop-2
💎Click here for our Detailing Services: www.mirandadetailing.com/deta...
Miranda Detailing
804-972-3051
www.mirandadetailing.com
___
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
🔦Lights
4 Pack LED Shop Lights 3600 Lumens 5000k amzn.to/2KiV9oT
5500K Photo Studio Light amzn.to/2DcQI0c
LED Light Bulb, 5000K Daylight, 1100LM amzn.to/2KdfVat
Astro 50SL Color Match Light amzn.to/2nqeyuN
Astro 50SLMAX 450 lm amzn.to/2Su3GuU
📷Recording Gear:
Canon SL2. amzn.to/2SniLhE
Comica CVM-V30 PRO Camera Microphone
amzn.to/2Ss4Tmu
#satisfyingdetailingvideos #autodetailingtips #mobiledetailing #interiordetailing #exteriordetailing #dirtiestdetailever #worstdetailever - ยานยนต์และพาหนะ
This is great! Most of the other TH-cam detailers work on new cars or completely avoid bringing up the rubber trim on their videos. Keep it up!!
The results speak for themselves. Thanks for sharing your knowledge Phil!!
Thank you Phil those rubber trims were the only thing bugging me about my car now i can restore them thank you 🙏🏼
Impressive results!!! I wouldn't have thought of this combo.Thanks for this awesome tip.
Wow, that turned out fantastic, Phil! Truly impressive what you know how to do. Thanks for passing it on to the rest of us!
Thanks! 😎👍🏼
Great to see the results, just remember to use a compound that doesn't stain trim.
Mould causes the rubber to become pitted so removing the top layer is the only real option.
Good work, keep it up and thanks for sharing
Not related to rubber, but since you used the "0000" steel wool, it works WONDERS on chrome!
On my 2022 BMW motorcycle, I use a light touch with a dry "0000" steel wool on my chrome surfaces, and it removes bugs, spots, etc., like magic. For rusty chrome, WD-40 and "0000" steel wool helps to remove the rust and polish the chrome. I did this with my 1976 Honda CB500t to great effect.
Hi. Oh yeah! We use it for chrome also. It’s awesome! Thanks for sharing.
I used the Maguires headlight restoration kit... Comes with 1800 up to 3000 sanding pads and then a light compound 🙌 worked a treat... Need to protect it now 🙌 thanks for the info 👌
Great video Phil always full of helpful tips and tricks.
This was helpful.
Initially I tried a magic eraser but the green scuff pad was much much better
Thank you for sharing your knowledge
Thank you for the video and info Phil!! Something to add to a up sell package! Keep the videos coming!
Phil, Great Tip. Thanks for Posting.
Hi Phil! Interesting video and love your humor. Looking forward to seeing many more videos.
Thanks Phil ! Great Video 👍🏼
Excellent Video! Trim restore like no other!
HUGE difference Phil and great video! The rubber trim can be such a pain to get that good looking. Great tips and very informative video I enjoyed every minute of it. 🐝
Thanks man!!
so glad I found this video, the trim before looked just like mine. I tried this method and mine looks like new now. thank you so much😊
Awesome! You’re welcome!
Great! Thanks for the tip, im professional detailer, and that method is really awesome.
Nice work. I did this few years back but I used soapy water with autobody red scotch pad, then followed it up with 1500 and then 2500 sand paper. Looked smooth and shiny. I'm not sure how long it looked good though as I didnt put any protection on it and I sold the car shortly after
Great video Phil, I need to try this on my customers vehicles
This guy is the buzz light year of cars love your confidence bro and your videos for sure 👍👍
Hey Phil, I think your use of the 'scuffy pad' first, then using the '0000' steel wool to refine the rubber works terrific. Great tip on an otherwise underused talent!
Thanks!
I use Mothers Mag and wheel polish and a soft terry cloth towel. Works on my '91 4Runner and the 2005 Cadillac STS rubber trim. Will not hurt paint or glass. I then top coat it with Mothers Back to Black. It has no colorant and lasts longer than other brands I've tried. If the rubber is etched it just takes more rubbing, but it leaves no scratches and a glossy finish that sheds water better.
Great video brother!! Thanks!! 👍🏼
Wow this looks amazing... was thinking of replacing mine but I'm gonna try this out... thx buddy..... 💯💯
The only video that taught me how to blacken my rubber seal that was discolored white. Thanks! I used my polishing compound to remove the upper layer and it revealed the black underneath. I tried for years without success and I was about to my new set of molding trim.
That’s awesome! Glad this helped you!
Thanks for taking time to share. Excellent.
Glad you enjoyed it!
The pink stuff is a good abbresive compound.
I used the steel wool pad with the same compound on my 2010 Challenger that was all pitted and rough and it came out so good!! I followed all of your steps and it’s night and day how the rubber looks now. 👍👍👍
Awesome! 😎👍🏼
I did some rubber trim a ways back and used a cordless 1 inch rotary with medium pad and some 3D worked a treat. Power tools FTW.
Great info! Thank you so much for posting this video! I have this issue with my 2013 Challenger. I was worried I was going to have to replace all the trim. Again, thank you so much!
Glad it helped!
Cool video! Thanks! I think this would work great with a final application of Cerakote, make it nice and black and water-repellant.
Brilliant, just what I was lookin for :D
So much better Phil my ram had the same issue and I used Mother's heavy duty trim cleaner, some simple green, steamer with brush attachment, elbow grease. Needless to say gotta try this.
Phil another home run video for me. You have a very creative mind that comes up with "genius" ideas. I have been good at washing, polishing, waxing, and coating accompanied with general interior cleaning, but I just don't have any experience in really cleaning cars in so many areas that you have addressed in your videos, especially with the issue you are addressing today. So, for my "Estimating or guestimating" knowledge book at this point for me, how long would you expect a job like this to take for a sedan and an average size SUV? Also how long did it actually take you on this vehicle? My original thought is to double the time you estimate for me initially, and only charge for the time it would've taken you because I am not going to make my clients pay for my education. This is a "learn through teaching, mistakes, and ah-ha moments" for me. Actually, there are a lot of videos that I need to start asking you this same question so I can build up my "Estimator" data spreadsheet. Thank you again for all you do for us.
Magic Eraser or Turtle Wax Miracle Cleaning Sponges may be an option for trim that is not so old and hammered. Impressive results.
Haven't tried or even heard of the TW sponge? Is it just a TW branded melamine sponge? I buy a generic version in bulk for like a quarter a piece.
The polishing makes it look really nice!
Thanks
Love your videos and I’m learning a lot with you, thank you for your hard work! I use black shoes wax on trims, rubber, plastic and leathers and works like dream! Apply the shoes wax let it seat than remove the excess than with dry towel polish it.
Dang thanks for sharing that!
Great work
Thank you for the video. Unfortunately I’m probably gonna have to replace the rubber because it has rotted and tore.
TACsystem Moonlight is stellar on trim! 🌝 🌟
I’ll have to try some 😎👍🏼
I own the same vehicle with the same issue and I’ve been searching for a way to solve this problem. Great to find this video finally. God is good
Good job!
You did a great job buddy tfs
Wow! That created some amazing results! In your experience what kind of longevity do you expect to get with that trim coating? Thanks! Jon
Thanks. I’m not sure yet on the durability but so far it’s been a few months and still looking great!!
what an improvement 👍
Hey Phil, great video! If a non-ceramic trim restorer such as Solution Finish is used, do you apply any kind of sealer over it? Any other brands you recommend?
Hi. Thanks! Yes you can apply something like Lithium Trim Serum or AM Trim.
But the best option would be to use a ceramic trim coating after the Solution Finish.
Loved the content...thankyou for sharing your method...I Have an old but beautiful Honda prelude..I use a similar method as your self but use engine oil as a lubricant and cleaning agent..It makes the rubber quite supple too!
Thanks! That’s cool!
Bravo. I have a 1995 Range Rover classic and the door window trim looks just like your Toyota. Problem is my trim is no longer available OEM or Aftermarket. Never thought of using polishing compound to take the outer layer off.
Awesome! Hope it works for you! 😎👍🏼
Wow this is very nice 👌
Brilliant. Been looking for this video. Loads on paint correction etc. but none addressing this. Thanks
You’re welcome!
Another great option my friend. I never would of thought of the green scotch brite pad. I normally use a magic eraser with an apc or adams tire and rubber cleaner. That does the trick every time. But to add another option is always great. I wonder if the white scotch brite pad would work just as well? Came out great
Thanks!
Start with the finer 320 grade red pad if they are not too bad. They are finer and leave no scratches.....just did mine, they came up like new...green is 100 grade, I'd only use them if the red failed to remove.
I'm trying Meguiars compound and Eraser Magic and top it with 303 ceramic Graphene
Worked great for me with very little effort (mine were not too bad). I used the finer grade red scotch brite cloth/pad (320 grade) with some Meguiars stage 1 paint cleaner polish (quick detailer spray worked as well) and had no visible scratches at all. Finished with some Autoglym (UK brand) plastic/rubber gel cleaner/protectant. Buffed off any smears on glass and paintwork with clean microfiber cloth.
Cool! Thanks for sharing. 😎👍🏼
Detailers are plastic surgeon's for vehicle's. Great job! 👍
Phil thanks for the great tip awesome video how about doing this on running boards?
we tried using this coating on the running boards with no success. I have something else planned for the running boards.
@@MirandaDetailing Thanks Phil keep up the good work 👉👍🥊
I once used apc, microfiber towel and medium elbow grease to restore it on a client's old jazz..
Awesome! Yeah I tried that on this and it’s too far gone. It needs some aggression! 😎👍🏼
Tea tree oil works and will kill everything without messing up the trim. I applied twice and those spots are about 85% gone will do another treatment and then use a trim restorer.
Cool tip. Thanks.
Great Video!! Phillip, I Was Wondering if Spray Nine Heavy Duty Cleaner Might Work As Well?.. I Also Came Across A Video By Chelsea's Attention To Details, She Used it To Remove Mold On Rubber Trim.
Thanks, maybe it would have, but I doubt it on this one, it needed abrasion to remove.
Great video. I was able to remove the mold and oxidation from my Toyota tundra rear window trim, but within a month and a half the marks seem to come back. What would be a good sealant or something to prevent the mold from coming back. The only thing I’ve tried so far is coating the trim with Beadmaker but it doesn’t seem to be helping.
Hi. Does your vehicle stay outdoors? Do you wash it regularly? I never had the mold return on me after I restored it.
That turned out great. The 3800 polish you used is that the super finish plus? Didn't see a link for it. I am going to try this on my 1993 Toyota Supra quarter window trim it looks just like your car did. New glass is $600 so if this works it saves me from buying new windows. Thanks
Hi. Honestly I don’t remember. It was an older bottle of Menzerna 3800 I had from years ago.
The lines are only visible if you get close and look at it. From any distance the results look great
Exactly. And I’ve even seen those lines on brand new rubber trim also when up close. Thanks! 😎👍🏼
Great! Can you share links to the products you used so I can buy?
Hi Sure I have them in the description below the video.
Hey Phil. This is a great tip. Thanks for taking the time to put this together. I'm curious about the longevity of this process. Do you think youight be able to do a follow up? I am curious to know if the rubber faded or dried out later on? Thanks again for taking the time to put your videos together!
You’re welcome! Yeah it’s on my Sequioa so we can keep track of it!
How has the black label ceramic holding up? Have you tried different ceramic coatings? I was thinking of using something from Cerakote for the rubber coating.
Hi. I since sold that vehicle a few years ago. But at the time of selling it the trim looked perfect still! We use a few different trim coatings but our favorite is Gtechniq’s c4 trim coating.
Hi brother, Great video and Great advice 👏🏻👍🏻👍🏻👏🏻👍🏻👏🏻. Would P&S Beadmaker work well on rubber trim to protect it after cleaning it bro?
Hi. Thanks. Yes you can use Bead Maker for trim but I would use a stronger protectant for rubber trim. Something dedicated for trim
Thanks bro! Just bought a car that’s absolutely beautiful (2022 Mazda MX-5 ND RF) except the weather stripping is all pitted and stained looking. Going to do this ASAP.
You’re welcome. Hope it helped!
I wish u were closer to nc i'd definitely take my car to u 😓 my local detailers don't know what they're doing
I used mequires Decontamination spray for my paint but it left a stained, bleached spotty look on my rubber. I'll use your tips to restore it.
Oh no! That’s weird! Hopefully it comes out.
Finally, someone working on older trim. Question though. The black on the door pillars how would you coat those? They feel like plastic but have a different feel from all the other trim. I'm planning on coating my Rav4 when it starts warming up and I want to make sure anything plastic is taken care of before putting CSL on everything.
Hi! So is black on your door pillars glossy or black textured plastic?
It’s glossy just like the sequoia smooth and shiny but feels like plastic not metal. It’s not faded like all the rest of the plastic so maybe I’ll just coat it and call it good.
Ah ok. So it’s most likely the black gloss pillars. Even though they are plastic underneath they are usually still paint d and clear coat led like normal paint so you can treat them paint. Polish and use a paint ceramic coating. 😎👍🏼
Clever, thanks.🇬🇧😊
Thanks! You're welcome
I have tan side panel trim that has faded also.
will this work the same?
thanks, Love your videos
Hi If its uncoated rubber then it should, what's the make and model?
02 Chevy 2500hd PU 4 door,
I will try it then let you know how I do.
Thanks
Whats the name of the coating you used after you did the whole cleaning process on min 13:01 ? Thanks in advanced
Hi. Sorry I didn’t link it in the description. It’s this. amzn.to/3sQL4si
Meguairs #39 heavy duty cleaner with a magic eraser. Less work in my opinion than using compound that leaves behind white residue.
Phil does the pinnacle streak down the door after a rain?
Hi. Nope. It’s a ceramic coating and not a dressing so once it cures it’s set. Pretty awesome stuff.
Thanks for Tip! You think Trim Shine may work or you prefer the dye? Great video as always ☺️
You’re welcome. The trim shine would definitely make it look great for a few weeks. The ceramic coating we used should last up to 2 years hopefully. It doesn’t need to be a coating with a dye in it. It can be any trim coating. I just happened to have this one.
Awesome.. Ceremic coating it is! It looks great too!
No negative comments here , if it works it works. Yay. Awesome results Better than new.
Lukat fix paint cleaner will get that molding right real fast try that tfs buddy
Does the Meguires ultimate compound work for this?
Hi. Yes that can work also.
Pretty impressive indeed... doing the whole car must take quite some time !
Thanks. You can blast though it pretty quickly once you get used to it. 😎👍🏼
I wonder if after cleaning it you could use mineral spirits to help with those lines.
Yeah I tried that but honestly the lines are not noticeable at all. It’s not a big deal at all. It still looks awesome.
I use adams tire & rubber cleaner & a small piece of magic eraser then use c4 from gtecniq
Cool! Thanks for sharing. I love C4 also!
hey phil ! what about apc and steam ? do you think it will work on it ?
Hi. I’ve tried just APC and steam and it doesn’t work for heavy mildew build up. It needs abrasive action to remove the top layer of mildew.
@@MirandaDetailing okay ! thanks for the answer
Do you think I will be Able to get spray paint residue on that rubber?
Hi. Are you asking if the trim can be painted? If so yes it could.
Great Phil Greetings from Dublin Ireland 🇮🇪 I have a car 🚗 ford trying to restore its been lying 😮😢up 4 a year and bit the same thing I've noticed on the rim around windows 🪟 No matter what I do with hot or a detergent it's still there... c we purchase this in Ireland?? Great patience Sir, u should of been a teacher really professional talk on how to get the best results 👏
Thanks for sharing!
Put some meguiars ultimate plastic restorer on there
I wonder if a 2500 sandpaper would work as well??
Probably would actually. That could be an option.
Great video, but wouldn't it make sense to do this with the window down the avoid scuffing the glass?
You could, but the pads or even 0000 steel wool won’t scratch the glass. But you could either tape it or put it down if you want. Good question! 😎👍🏼
Thanks for the video and tips! I'm going to try mine with the window down, hoping that polishing and restoring the inner lip that touches the glass will help restore a more even glass wiping action when the window goes down and up for clearing fog etc.
Been patiently waiting for this one. I have a ‘13 Taco with window trim that needs some love. Will tackle that this spring - thanks Phil!
Wait.. what? Taco?? 🤔
Ohhhh.. Toyota Tacoma? 😁👍
Word of warning - These rubber trims can be surprisingly very thin on the corners. I followed a guide to abrade trim mould on my Honda Prelude many years ago, using fine emery paper, yet managed to hit bare metal on the trim corners very quickly, before I had even removed most of the mould: had to buy new trim pieces in the end. I was fairly careful and only removed a fraction of a mm before I hit metal, so consider starting with a magic eraser sponge or 3000 grit emery paper and strong degreaser or suitable polish.
Excellent tip! Thanks for sharing!
Sorry, kind of skipped to the process. Did you consider magic eraser? If it is effective against the oxidation and mold, could forego masking tape step. Wont abrade paint or metal trim on older vehicles. Just hit the paint around the trim with a detailer or spray wax afterwards if worried about the protection, sooner or later.
Oh yeah I’m sure that could work also. But the eraser tends to deteriorate and fall apart when put pressure is applied to it. I’ve tried it and it’s ok but the scuff pads and steel wool won’t fall apart like the eraser will.
@@MirandaDetailing Good points.
Yeeees!! Exactly what I was looking for!!
do u prefer this restore over solution finish?any noticeable difference between these 2 products?just curious
Hi! Actually Solution Finish would have worked also, I just chose to use this coating since I had it.
Funny to think that the solution for old rubber is simply to take off a layer of rubber... Like there's always more good stuff underneath
Another great tip. I have a question though. Could you use an old mini polishing pad as well? We all know what happens when a pad comes into contact with the trim if you don't tape off those sections, I have done it and I don't think I'm the only one.
Thanks. Totally. I just feel I have better control by hand and getting close to the corners and edges better than with a mini polisher. But maybe just use both.
@@MirandaDetailing can we use sandpaper?
@@jalilpandi1347 Hi. You could use 3000-5000 grit, that can also work.
@@jalilpandi1347 A scotch brite pad will take the shape of the rubber better, start with the red 320 grade, if that doesn't wont move up to the green 100 grade....only use a small piece of pad and try to take the shape of the rubber with two fingers keeping it off the paintwork if you don't mask it.
If there was lines left over . What if you took a 3000 grit sandpaper to further refine the lines! Thanks guys
Well like I mentioned I have seen lines like that in brand new rubber trim. It’s bot just becasue of the steel wool. Honestly it’s not noticeable to the eyes. The close up shots make it more noticeable. But despite that for old rubber trim this what I would do for a customers vehicle. It worked out great! 😎👍🏼
@@MirandaDetailing the camera definitely shows more, the human eye isn’t going to catch that. It’s not a show car .
Totally!
I miss that shirt! Such a great name and logo🥺! Car Guy supplies, now car supplies warehouse. I liked it better before. What did you like more?
Yeah I liked the old name too. It stinks that they had to change it.
When rubber trim is coated does it still get moldy and faded over time? Or should it be fine
Hi. It still may fade and get mildew on it but you have have to be more careful with it.
Yes, rubber is easier to clean removing that top layer, just like doing it on oxidized paint after washing and decontaminating it. Phil, one thing I have done and also worked for me was the Griot's Garage Speed Shine or Doctor Mecánico which is a locally made Multi Purpose cleaner which is soapy since are used as lubricants to remove all that filthy top layer and I had them available at Advanced Auto. Also the scuffy pad. Thanks for your review video and great to know about that polish from Xtreme solutions to use it for that too.👌👍🇵🇷
True. It can be risky if the rubber is to far gone. I’ve seen it where the rubber is deteriorating away. But this one came out great! Thanks for the tip on that cleaner
How long did it take you?
Well because I was filming also maybe 30 min. but without filming 15-20 minutes for all the trim.
@@MirandaDetailing Thanks Phi