AFTER PLUGING THIS CABLE, WE CAN READ THE VEHICLE ECM SOFTWARE WITH THE HP TUNER AS I KNOW.. BUT IS IT POSSIBLE TO MAKE CHANGES TO THE ECM SOFTWARE AND THEN WRITE BACK TO THE VEHICLE AGAIN? CAN YOU GIVE INFORMATION ABOUT THIS TOPIC? THIS SHOULD BE THE MAIN ISSUE...2018+ CHALLENGER 3.6
The computer has to be unlocked by HP tuners to be able to write/change settings. The cable just unlocks your canbus “star network” to be able to communicate with the ECU. You can read it however it’s locked and will need unlocked to be able to write
Thanks for the video that’s one of the best I’ve seen for accessing the module
Thank you for the detailed explanation 👍.
Esto me sirve también para poder leer con escáner de OBD2 cierto ??
Hi did you let the cable on the car or you use it temporary till you make modify for the car because I didn't understand you
Leave it
Does it stay on there or when your done tuning do you take it off?
Just leave it in case you need to make changes.
@TaterSalad83 thank you
Leaving it does half the job for someone stealing your car.
@@squaddlife 🤫
W guy 💪🏼
Hey. Do you know anyway to get the Uconnect features like performance pages and stuff back on now that 3g is canceled
Yeah you should be able to call them and you can buy a dongle that plugs into your obd2 port
if you have the access cable you don’t need to unlock your pcm ??
No you need to do both
U could have just used a adc 2011 cord and plugged straight into the star connector but yea good video.
Roll jam Sam kamka
AFTER PLUGING THIS CABLE, WE CAN READ THE VEHICLE ECM SOFTWARE WITH THE HP TUNER AS I KNOW.. BUT IS IT POSSIBLE TO MAKE CHANGES TO THE ECM SOFTWARE AND THEN WRITE BACK TO THE VEHICLE AGAIN? CAN YOU GIVE INFORMATION ABOUT THIS TOPIC? THIS SHOULD BE THE MAIN ISSUE...2018+ CHALLENGER 3.6
The computer has to be unlocked by HP tuners to be able to write/change settings. The cable just unlocks your canbus “star network” to be able to communicate with the ECU. You can read it however it’s locked and will need unlocked to be able to write