Fast review Meter PZEM-016 Modbus RTU RS485 with frequency y Power Factor: PDAControl

PDAControl Present... #PZEM-016 #Peacefair #Modbus
Tutorial, documentation and downloads Complete: pdacontrolen.com/initial-revie...
Tutorial, documentación y descargas Completa: pdacontroles.com/revision-inic...
Initial tests of Peacefair PZEM-016 meter, allows measurements of Voltage, current, Active Power, additional accumulated power, frequency measurement and power factor.
Communication protocol Modbus RTU slave on Serial RS485.
Recommended and where to buy them cheap!!
Meter PZEM-016 + CT (0-100A) s.click.aliexpress.com/e/bXeUfp2s
ESP32 s.click.aliexpress.com/e/Ayju3Fa
ESP32 + 0.96" Oled s.click.aliexpress.com/e/lAnSzrE
ESP8266 12 Node MCU v3 s.click.aliexpress.com/e/b6QNZfy
Arduino Nano V3 Clone s.click.aliexpress.com/e/YjqR37m
Arduino Mega 2560 R3 Clone s.click.aliexpress.com/e/Y7I2NVr
Raspberry pi 3 s.click.aliexpress.com/e/po06dgk
Raspberry pi zero w s.click.aliexpress.com/e/cBkmnL1O
Meter PZEM-004 with Display s.click.aliexpress.com/e/YNVrZjq
Meter PZEM-004T s.click.aliexpress.com/e/uBunmAm
Playlist Recommended
• Power Meter PZEM 004 P...
-------------------------------------------------------------------------------------------------------------
Pruebas iniciales de medidor PZEM-016 de Peacefair, permite mediciones de Voltaje, corriente, Potencia Activa, potencia acumulada, adicional medición de Frecuencia y Factor de potencia.
Protocolo de comunicación Modbus RTU esclavo sobre Serial RS485.
Recomendados y donde Comprarlos baratos!!
Meter PZEM-016 + CT (0-100A) s.click.aliexpress.com/e/bXeUfp2s
ESP32 s.click.aliexpress.com/e/Ayju3Fa
ESP32 + 0.96" Oled s.click.aliexpress.com/e/lAnSzrE
ESP8266 12 Node MCU v3 s.click.aliexpress.com/e/b6QNZfy
Arduino Nano V3 Clone s.click.aliexpress.com/e/YjqR37m
Arduino Mega 2560 R3 Clone s.click.aliexpress.com/e/Y7I2NVr
Raspberry pi 3 s.click.aliexpress.com/e/po06dgk
Raspberry pi zero w s.click.aliexpress.com/e/cBkmnL1O
Meter PZEM-004 with Display s.click.aliexpress.com/e/YNVrZjq
Meter PZEM-004T s.click.aliexpress.com/e/uBunmAm
Lista de Reproduccion recomendada
• Power Meter PZEM 004 P...
------------------------------------------------------------------------------------------------------------
Web English Web Español
pdacontrolen.com pdacontroles.com
Twitter: @Jhon_Control @PDAControl #PDAControl
Donations : www.paypal.me/pdacontrol
Facebook:
/ pdacontrol
/ 952143111598210
Audio Video: ThornsOfOmarV2 for Jason Shaw
Licensed under a Creative Commons Attribution 3.0 Unported License.
audionautix.com

[@butteryak]

Do you know if the Kwh reading is retained on power loss? or does it reset back to 0.

[@billssolarpowerandgardenin1016]

That looks great. Where did you locate the Ningbo software? Thanks for sharing!

[@PDAControl]

Hello Bill's, at the end of the article, you can download the software pdacontrolen.com/initial-review-meter-pzem-016-modbus-rtu-rs485-by-peacefair/ , regards and subscribe

[@billssolarpowerandgardenin1016]

PDAControl Thank You!

[@chickenz4604]

NIce Video Thankyou, i have pZEM-016, it works well for 1-2 days, but suddenly myPLC cant read rs485 value from the powermeter anymore. When I open the PCB Board, one of the component is (max485 csA +19DN) overheat (around 100degree celsius when i check with thermometer). How to fix it?

[@PDAControl]

Hello, Initially Thank you, for watching my videos, can you confirm it is the integrated MAX485, or the equivalent TTL to RS485 converter, it is really strange that the communication wiring overheats, do you use bus terminating resistors? Regards from PDAControl

[@hazardede_n]

Can I use it to measure more than 100 amps ?

[@PDAControl]

Hello, @hazardede_n , Although the Manufacturer mentions 0 to 100A, I would believe that 100 is its maximum, beyond that I suppose it will not measure, Regards from PDAControl pdacontrolen.com/category/peacefair/

[@shrikantgedam2900]

can i modify slave id, stop bit, baud rate, parity etc i want to this device in existing network.?

[@PDAControl]

Hello Shrikant, I suppose it should be possible, in the documentation of this video at the end a software is downloaded, pdacontrolen.com/initial-review-meter-pzem-016-modbus-rtu-rs485-by-peacefair/ for monitoring via modbus, it allows calibrations and additional configurations that I suppose are the ones you want, the software requires a password which I can not get, if wish you could start the search for this one,
regards

[@inge_prof_lab]

@@PDAControl la constraseña está en el manual txt

[@flokyshah5877]

how to access it remotely?

[@PDAControl]

Hi MUHAMMAD BILAL , access the data, the measurements from another platform iot and / or hmi, this tutorial is among my next tests, integrate it with nore-network and rpi, similar to this tutorial but with RS485 th-cam.com/video/GRywJ38qDGc/w-d-xo.html , Regards

[@shrikantgedam2900]

Hello...

[@PDAControl]

Hello

[@shrikantgedam2900]

@@PDAControl can I modify communication parameters setting such e slave ID, parity, stop bit, baudrate etc