THANKS for a very detailed, narrated demonstration. Great lighting and was all clear and on focus. THANK YOU !!! From the picture of it, on line, I couldn't make out how it worked. And whether or not to get a knife switch type or a knob type L-pad type, or just take the terminal off every time. I'm going to get a top post style for my 1986 Mercury Colony Park Station-Wagon. There's something, very minute, that will sap the battery overnight. It's NOT a phone charger, nor a light. I've been thru it. The battery is clean, so it's not discharging THAT way. The best is to raise the hood and disconnect the battery. THANKS again for your video. I Subbed.
I got it in but for some reason I had to add a washer for it to properly tighten to the battery but that's ok. The screw was a tad too short. It works great and I love it!! 👍👍
The washer is for the side that has the threads. Sometimes they have two bolts one don’t work for the battery. I don’t know why they put it in there. They only need one bolt with it the one that threads.
Don’t need to wear in. It works perfect. When you take it out of the package you overemphasize that point it’s not necessary but the presentation is great Cuz it’s a simple thing to install.
I just wasted 5 minutes of my valuable time to watch some guy take apart and put it back together over and over again. WOW. I am very impressed. Why couldn't you show how it hooks up to the battery.
My 2013 newly purchased corvette has this switch attached to the positive post. It continues to lose power and everything dies. I want to remove but don’t know what to do with my 2 wires. Help!
I am 99% sure that item is not brass !!!! BRASS COLOURED YES but it is die cast that is why the half contact area is of a silver appearance Just saying from down under in Australia
Mind makes contact with us that's screwed in or screwed completely off... If you like sitting inside your vehicle with the dome lights on don't buy this... It turns the dome lights off,
Mike Barker has an excellent video of how to install it. That's the one I used to help put mine in. Much better than the one I mentioned from Mike. Good luck. I love mine.
Smh I was looking for a video that shows how is it work ones it's installed... This was a waste of time.. I wanna see how is it work so you turn off the car first or switch this while the car still on?
Geezus would you climb out of a car and disconnect a battery lead while the car was still running? No! This product does the same thing, just in a quicker, more convenient fashion. Screw your entitled complaining smh comment. Grow up.
![[#2024MAMA] G-DRAGON - 무제(Untitled, 2014)+POWER+HOME SWEET HOME+뱅뱅뱅+FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/Ox29z5Nf1Uk/mqdefault.jpg)
THANKS for a very detailed, narrated demonstration. Great lighting and was all clear and on focus. THANK YOU !!!
From the picture of it, on line, I couldn't make out how it worked. And whether or not to get a knife switch type or a knob type L-pad type, or just take the terminal off every time. I'm going to get a top post style for my 1986 Mercury Colony Park Station-Wagon. There's something, very minute, that will sap the battery overnight. It's NOT a phone charger, nor a light. I've been thru it. The battery is clean, so it's not discharging THAT way. The best is to raise the hood and disconnect the battery.
THANKS again for your video.
I Subbed.
I'm glad that you took it apart because I wasn't sure how it worked and wasn't going to buy it. Thanks
Any time!
So excited to try this. Going to install it today!! So sick of my battery draining. I think my clock is the culprit in this ole '79. 😊
I got it in but for some reason I had to add a washer for it to properly tighten to the battery but that's ok. The screw was a tad too short. It works great and I love it!! 👍👍
Oops, meant screw was too long, lol. I tried to reverse them but that way was way too short. Regardless, it works. 😁
The washer is for the side that has the threads. Sometimes they have two bolts one don’t work for the battery. I don’t know why they put it in there. They only need one bolt with it the one that threads.
Don’t need to wear in. It works perfect. When you take it out of the package you overemphasize that point it’s not necessary but the presentation is great Cuz it’s a simple thing to install.
just put ASMR in the title and you will get x1000 views lol
I just wasted 5 minutes of my valuable time to watch some guy take apart and put it back together over and over again. WOW. I am very impressed. Why couldn't you show how it hooks up to the battery.
My 2013 newly purchased corvette has this switch attached to the positive post. It continues to lose power and everything dies. I want to remove but don’t know what to do with my 2 wires. Help!
@Anthony Ramsey Thanks for the laugh!
It should be on the negative.
In need that
do you think you could bend one side 90 degrees and have it still function properly?
I don't think so.
I am 99% sure that item is not brass !!!! BRASS COLOURED YES but it is die cast that is why the half contact area is of a silver appearance Just saying from down under in Australia
Now u gotta keep opening ur bonnet
❤
Put it on would help me better
So it go on the positive or negative
Well, when you hook up a battery, you connect the positive first.
Then you connect the negative last.
So it goes on the negative.
Mind makes contact with us that's screwed in or screwed completely off...
If you like sitting inside your vehicle with the dome lights on don't buy this... It turns the dome lights off,
I got this and the bolt does not screw into side post and the cable doesn't tighten on its side of the connector. POS.
I would like to see you hook it up to a side post battery, just looking at the part is not a skill
If you need a demonstration, you're too dumb to use it.
I can't find one video that actually shows them being connected to a battery.
@@seerstone8982 There is one that shows a little more than this. I'll look it up and add it here for you.
One by John McIver called Auto Battery Shut Off (or close to that title)
Mike Barker has an excellent video of how to install it. That's the one I used to help put mine in. Much better than the one I mentioned from Mike. Good luck. I love mine.
Can't you speak a little bit up ? Sounds like you talking to yourself !
kinda late for that no?
Just turn your volume up for gods sake. I understood him just fine.
...a little bit up? "Can't you speak up a little? It sounds like you're talking to yourself." English people, ENGLISH!!!!!!
Smh I was looking for a video that shows how is it work ones it's installed... This was a waste of time.. I wanna see how is it work so you turn off the car first or switch this while the car still on?
Always turn the car off first. Then disconnect the battery.
@@FixItYourself Ok thank you
Geezus would you climb out of a car and disconnect a battery lead while the car was still running? No! This product does the same thing, just in a quicker, more convenient fashion. Screw your entitled complaining smh comment. Grow up.
"shows how is it work ones it's installed" Does anyone speak English anymore?
If you can’t figure out how this works after watching the video then you probably don’t need to be driving anyway.