Every F30 NEEDS These Mods

แชร์
ฝัง
  • เผยแพร่เมื่อ 1 ก.ค. 2024
  • The charge pipe is arguably the first mod you should do for your F30 and while you're there you might as well do the intercooler. See how to do it on your BMW in under an hour.
    Intercooler: tinyurl.com/n55VRInt
    Charge Pipe: tinyurl.com/n20chargepipe
    Boost Pipe: ebay.us/LNSxaT
    Intake Valve Cleaner: amzn.to/2LG29zX
    Mass Air Flow Sensor Cleaner: amzn.to/31IYGGn
    Drill: amzn.to/3poC8IW
    Bits: amzn.to/3taB3We
    Creeper: amzn.to/2V8aHTe
    Allen Wrenches: amzn.to/3hp4P47
    Ratchets: amzn.to/3pkohDh
    Thanks for tuning in. If you are looking for a complete tool kit as well as video gear hit the links below.
    Tool Kit: kit.co/fritzramos/bmw-mechani...
    Video Gear: kit.co/fritzramos/filming-gear
    If you are looking to get started on TH-cam, consider Tube buddy as it has helped me out a great deal. Try it out for free: www.tubebuddy.com/financialfi...
    Some of the above links are affiliate links. By using them you help support the channel at no additional cost to you. Thank you for your support.
    00:00 Intro
    00:35 Why These Mods are Important
    02:54 Chargepipe Uninstallation
    04:07 Intercooler Uninstallation
    04:39 Intercooler Comparison
    05:08 Intercooler Install
    05:43 Chargepipe prep
    08:09 Chargepipe Install
    09:15 Initial Impressions and Tips
  • ยานยนต์และพาหนะ

ความคิดเห็น • 48

  • @noelelnolo9642
    @noelelnolo9642 ปีที่แล้ว +2

    Fritz, your videos r excellent. Top jotch! Thank u!

  • @argonovak3444
    @argonovak3444 ปีที่แล้ว

    Great video

  • @jimmyn2054
    @jimmyn2054 2 ปีที่แล้ว +1

    I have the exact same set up , can you make a video on the VRSF Muffler with the diffuser like a 335i? Luv your vids!!

  • @jimmyv1289
    @jimmyv1289 ปีที่แล้ว +2

    Hey fritz any chance you would know the part number for the 2 new gaskets you installed can't find them anywhere! Thank you!!!

  • @thomasdiersch1181
    @thomasdiersch1181 2 ปีที่แล้ว +7

    Nice upgrade. I'm thinking of getting a new charge pipe for my M235. Mine is still stock

    • @FritzRamos
      @FritzRamos  2 ปีที่แล้ว +1

      Thank you and yes! You definitely should.

  • @wasing02
    @wasing02 6 หลายเดือนก่อน

    Do you know if changing out the charge pipe and intercooler will trigger a check engine light?

  • @davidcollison8490
    @davidcollison8490 ปีที่แล้ว

    Have got a link for your jack you used please.

  • @Durikono
    @Durikono 5 หลายเดือนก่อน

    Does the BMW shows his MIL because he has a bigger Intercooler? (More volume)
    I want to upgrade some parts, so that I can get a long time with it. BUT the ECU will be stock!
    And did the car need “longer” (like a turbo leg)

  • @Skintback27
    @Skintback27 2 หลายเดือนก่อน

    I couldnt choose so i went FBO all at once all with a paper tag still lol

  • @kaichow6931
    @kaichow6931 2 ปีที่แล้ว

    CAn N20 IC fit into N13 without any modification ?

  • @Mr2004audi
    @Mr2004audi ปีที่แล้ว +1

    What jackstands are you using there? They look awesome! And which jack is that?

    • @FritzRamos
      @FritzRamos  ปีที่แล้ว

      Jack: amzn.to/3r5Sp6n
      Jack Stands: amzn.to/3r33i94

  • @RangeVibeZ
    @RangeVibeZ ปีที่แล้ว

    Will this work on a 2013 528i x drive n20 f10

  • @MR.ROBOT...76
    @MR.ROBOT...76 ปีที่แล้ว

    Man I can't wait to get my first bmw... 335i that is

  • @robertconklin502
    @robertconklin502 2 ปีที่แล้ว +2

    Awesome video! Do you have to get a tune after this install? I'm actually doing this, Injen intake, catless downpipe, new boost pipe n inlet pipe upgrades as well as with a muffler delete. Will it hurt the car to drive like this until I get a stage 2 tune?

    • @FritzRamos
      @FritzRamos  2 ปีที่แล้ว +2

      No, I ran the m235i like that for a while. Here's my review on it th-cam.com/video/LZf8UuszVGY/w-d-xo.html Hope that helps

    • @robertconklin502
      @robertconklin502 2 ปีที่แล้ว +1

      @@FritzRamos thanks!

  • @Sqwin_n20
    @Sqwin_n20 2 ปีที่แล้ว +13

    Just a heads up, the stock clutch can’t hold stage 2 OTS maps. Ask me how I found out the hard way. Good luck and have fun fritz.

    • @FritzRamos
      @FritzRamos  2 ปีที่แล้ว +1

      Thanks for sharing! I'm sorry to hear that. It's a good thing that this car won't get a tune 😅

    • @dylan-nguyen
      @dylan-nguyen 2 ปีที่แล้ว

      The stock pistons can’t hold stage 2 either
      I had to get an engine rebuild at 90k and am now running a stage 1 jb4 tune

    • @Sqwin_n20
      @Sqwin_n20 2 ปีที่แล้ว +1

      @@dylan-nguyen that’s why you don’t run JB4 a piggy back. Stock internals are fine. Piggybacks have a margin of error as well.

    • @dylan-nguyen
      @dylan-nguyen 2 ปีที่แล้ว

      @@Sqwin_n20 stage 2 was a bm3 and I didn't wanna pay for it again for a stage 1 so I got a used jb4 from someone at work

    • @Sqwin_n20
      @Sqwin_n20 2 ปีที่แล้ว

      @@dylan-nguyen bootmod did nothing to your car lol. Not sure why you had to get a new tuning platform and go JB4 if your motor was rebuilt + used the same DME for licensing. It would still be tired to the same car/DME. Sounds like someone is spreading BS.

  • @chasegoodman7672
    @chasegoodman7672 2 ปีที่แล้ว +2

    3rd upgrade should be to get BimmerLink & BimmerCode as well as a BT OBD2 dongle. 4th upgrade... MST Cold Air Intake because of the heat shield and MAN DOES IT SOUND SEXY

    • @chasegoodman7672
      @chasegoodman7672 2 ปีที่แล้ว +1

      Also, the charge pipe should 100% be the first upgrade. Mine exploded on the way to Taco Bell one evening

    • @FritzRamos
      @FritzRamos  2 ปีที่แล้ว +1

      Darn Taco Bell. I Scrapped my rim leaving their drive though lol. Tha one's on me though.

    • @FritzRamos
      @FritzRamos  2 ปีที่แล้ว +1

      Good points! I might have to sneak 1 or 2 more items in front of your list though.

    • @chasegoodman7672
      @chasegoodman7672 2 ปีที่แล้ว +1

      @@FritzRamos What would you sneak ahead? Just curious if it is something I have not done yet
      I have all hot and cold piping changed. I still need to do the VRSF FMIC tho :/

    • @FritzRamos
      @FritzRamos  2 ปีที่แล้ว +1

      @@chasegoodman7672 Mickey Mouse Flange and Turbo inlet. Videos incoming

  • @AdrianJayeOnline
    @AdrianJayeOnline 11 หลายเดือนก่อน

    @0.28 DUDE is that a block of "blow" ?

  • @D1beam
    @D1beam 2 ปีที่แล้ว

    I did vrsf down pipe but now I’m trying to get a tune to remove my chrck
    Engie light since the 02 checks it

    • @FritzRamos
      @FritzRamos  ปีที่แล้ว

      If you plan on getting BM3 you can code it out with their app

  • @87mitchb
    @87mitchb 2 ปีที่แล้ว +1

    Im trying to decide between an f30 320i or an Audi A4? The f30s i have looked at are quite worn like cracks in the headlights and window and door surrounds.. and they only done around 60k miles. Is the A4 i higher quality build? How about reliability?

    • @dylan-nguyen
      @dylan-nguyen 2 ปีที่แล้ว +1

      From personal experience the 4cyl bmw engines have a huge flaw. Timing chain guides fail ~100k there was a class action lawsuit
      A4 on the other hand has loads of electrical issues sensors failing all the time. Coworker has one and like every other month has to bring it in for a broken sensor
      I personally will only get cylinder bmws as they’re all pretty reliable
      As for the interior, mine looks brand new with only the interior door handle guard cracking which is common. Whatever rubber they used deteriorates and they’ve changed the material in my new car. But that’s a 1-2hr fix (all 4 doors) and diy with just hand tools + drill
      I don’t know about Audi interior but the build quality is way worse lots of “bling” to look nice but cheap materials and worse fitment

  • @nordin2131
    @nordin2131 2 หลายเดือนก่อน

    800hp🤔👍👍👍
    i need that👍🙏👏👏👏

  • @uTAPOUT1
    @uTAPOUT1 ปีที่แล้ว

    I have a b47 what similar components could I change for longevity

  • @realsaxual2357
    @realsaxual2357 6 หลายเดือนก่อน

    Is lifting it on hockey pucks not sketchy????????? Idk how I feel bout that

    • @FritzRamos
      @FritzRamos  6 หลายเดือนก่อน +1

      The rubber is just as sting as any of the rubber pads for jack stands. Just don't get the "training" hockey pucks. They're a softer rubber and compress much easier

  • @johnpena1758
    @johnpena1758 2 ปีที่แล้ว +1

    I did the same thing wen I got my n26 but I wen to do my smog they wouldn’t pass me cause of the pips are not oem tho

    • @FritzRamos
      @FritzRamos  2 ปีที่แล้ว +2

      So it just failed the visual? My smog location didn't even look under the hood.

    • @johnpena1758
      @johnpena1758 2 ปีที่แล้ว

      @@FritzRamos yeah just the visual people here in El Cerrito do extra lol

  • @philpham2069
    @philpham2069 2 ปีที่แล้ว

    The B48 doesn't have intercooler, only charge pipe 😓