Dracoid : Blender to printer. (anet a8 3d printer)
ฝัง
- เผยแพร่เมื่อ 13 ธ.ค. 2019
- Project : homo-draco-oid.
Type:mini size flying humanoid.
Height:37.5cm
Weight:1.19kg
Thrust:2.5kg+
Thrust/weight:2.1
Components :1x esp32(now I'm using usc32 with Bluetooth to test it) , 1x mpu6050, 8x voltage regulator mini 360 ,12x towerpro mg92b 3.5kg/cm micro servo, 9x towerpro mg90s 1.8kg/cm micro servo, 1x gnb 11.1v 850mah 80c/160c lipo battery, 4x 20a drone esc, 4x a2208 1100kv brushless motor, 4x 8 inch foldable drone propeller, 1kg abs filament, m2*6,*8,*10,*18 screws a lot, 10x m3*8 screws, 8x m3*16 crews with nut, 2x rectangular led 2*5*7.
3d stl, blender file:
drive.google.com/file/d/1k-i5...
Command for usc32:
drive.google.com/file/d/1RqWp...
wowwwww
Nice. I’m looking for a 3D printer to build some robots for my kids. I was ready to go with the Ender 3 but the A8 seems similar in quality but lower cost.
I never use ender3, so I can't tell how good it is compare to a8, but a8 is a lot better than I expected, very recommended to use petg filament, the results is amazing.
tang woonthai I decided to get the clone of the Alfawise u30 pro, that is the Longer LK4 Pro. I will start with PLA, but planning to print my parts in PTEG, as you recommend, and PP, which brand of filament are you using?
Longer lk4 look great, aluminum frame, extended extruded feeder ,especially auto levelling bed, I spent so much times on adjusting it. I usually just buy the cheapest I can get, 3d aura or fabbxible filament and sometimes unbranded. Now I'm using 3d aura petg.
I need cinematic
What is program on laptop behind robot please tell
Rios
@@tangwoonthai can I use two PCA9685 16 CH servo controllers or do I need to order different controller
You need to connect the pca9685 to a microcontroller such as Arduino nano or esp32 to work, usually I will simply using two esp32 (16 channel each) and get 32channel, but you can use 1 esp32 + 1 pca9685 to get
32 channels too.
@@tangwoonthai would an Uno r3 fall in those lines ? Or should I get HiLetgo ESP32 OLED WiFi Kit on Amazon
@@tangwoonthai making a 22 dof minimum robot with mg995 servo