Been painting for 20 years now. I've seen the rollers with poles you can fill with paint to roll with but never a auto mechanical paint roller. Thanks for showing this.
Let’s get this guy some likes! So great to have someone putting great info in our industry out. I always have the thought to do it but I’m so focused on getting the job done I never do a video so I appreciate it. Your time is valuable
Painting over wallpaper sure is a lot easier than tearing it all down and skim coating it. Sometimes the customer doesn’t seem to understand how much goes into tearing off paper and completely redoing the wall to the point where it looks good. We put it in the bid that the time and cost will be conditional on how bad of shape the walls are in. We just did a dental office and the job took like a month longer tearing off the paper than if we just painted it. It was a huge pain in the butt having to work around their dental equipment
In the future you can use tuffhide dry wall filler will hide the wall paper and I always use an 18” roller when I power roll I use the power roller to load the wall and the 18” to lay it off ..
By the time your setting up Sprayer , your already rolling, and by the time to clean up sprayer and pole your already done with Old school Rolling. I think for A lot of sq footage will work best , but for couple rooms Old school Rolling will work best! I just tell it like it is!!!
I am not a professional painter, but flip houses. I can paint all the interior walls myself in a day with a titan feed roller. Roll time is diminished to nothing. Cleanup/setup about 15 min.
@@mph5896 will work for A lot of Sq footage, complete Interior yes, but not for 1 room or couple rooms. You will roll 2 rooms faster then putting Feed roller.
+ being able to switch poles for closets & stairwells & smaller spaces goes a long way, I would always want a back roller behind me with a tray for smaller spaces
@@quantom3392 exactly. Another + old school style you need a bucket 🪣 & pole your good to go! Feed roller, You need Gun, pole, hose, Graco sprayer, extension cord + electricity ⚡️ , bucket 🪣 of water to clean, energy bill ect Like a said , if you have a lot of square footage to paint yes it will be good, but for Rooms.
Awesome video thank you for this. I was curious about these. There are those Mickey mouse plastic clam shell roller sleeve keepers. I bet that would work for a few stops.
Not with the innerfed roller. Graco does make an 18" jet roller which is basically just a roller attachment on a spray tip. Can't tell you how well they work because I've never used one.
Tried this few new construction jobs. Compared it with 18” rollers. This was much faster and easier. Specially on new drywall where using a lot of material. You can set up your sprayer on 1st floor and paint with this on 5th floor, no 5 gallon buckets to carry. The only problem is it doesn’t have microfiber rollers. One coat of primer and two coats of finish even the 3/8 leaves a big texture on smooth walls.
Idk man I've tried this rig and I think you a few years ago would have advised against it. Maybe certain applications but you sure you haven't got too Hollywood? Just keeping you honest, love your vids
I just use this on a ceiling last week, way too heavy, my crew try it for 3 mins and give up, i finish 2 ceilings with this roller. Decide to sell the roller and the Titan 440 which I brought last year. I spend 30+ hours to learn how to use sprayer,doesn't work out for me. Too many limitations to use in a residential project
@@jimeneazy5999 i only get 1 or 2 spindle job per year. I can paint 13-15 doors (including door frame)a day using brush and roller.i had tried with the sprayer. It's 2-3time slower and i break a ceiling light because I was moving door from room to room.
@@wwsunmoon What about louver doors with the slats? I'm usually working remodels for an investor that flips properties and flooring is usually replaced so we spray everything.
Been painting for 20 years now. I've seen the rollers with poles you can fill with paint to roll with but never a auto mechanical paint roller. Thanks for showing this.
If u wanna knockout some square footage...have some1 with 18 inch roller right behind him
Let’s get this guy some likes! So great to have someone putting great info in our industry out. I always have the thought to do it but I’m so focused on getting the job done I never do a video so I appreciate it. Your time is valuable
Painting over wallpaper sure is a lot easier than tearing it all down and skim coating it. Sometimes the customer doesn’t seem to understand how much goes into tearing off paper and completely redoing the wall to the point where it looks good. We put it in the bid that the time and cost will be conditional on how bad of shape the walls are in. We just did a dental office and the job took like a month longer tearing off the paper than if we just painted it. It was a huge pain in the butt having to work around their dental equipment
In the future you can use tuffhide dry wall filler will hide the wall paper and I always use an 18” roller when I power roll I use the power roller to load the wall and the 18” to lay it off ..
I've had nothing but trouble with power rolling. Like you said the nap is really bad. But I didn't realize I could use tape to delint it.
Its good if you have long corridors can have someone with power roller applying while someone comes behind and cleans it up back rolling
@@RP-se9lf yeah that's kind of the problem I encountered. You got to roll it again and again and again.
Can you do a comparison of spraying vs power rollers? I've got a knockdown ceiling, and walls.
Great job. What roller system is this ?
Would you recommend using on a exterior instead of spraying and back rolling?
No
Ese equipo esta muy bueno
By the time your setting up Sprayer , your already rolling, and by the time to clean up sprayer and pole your already done with Old school Rolling.
I think for A lot of sq footage will work best , but for couple rooms Old school Rolling will work best!
I just tell it like it is!!!
Keep up the hard work Idaho
I am not a professional painter, but flip houses. I can paint all the interior walls myself in a day with a titan feed roller. Roll time is diminished to nothing. Cleanup/setup about 15 min.
@@mph5896 will work for A lot of Sq footage, complete Interior yes,
but not for 1 room or couple rooms. You will roll 2 rooms faster then putting Feed roller.
+ being able to switch poles for closets & stairwells & smaller spaces goes a long way, I would always want a back roller behind me with a tray for smaller spaces
@@quantom3392 exactly. Another + old school style you need a bucket 🪣 & pole your good to go!
Feed roller, You need Gun, pole, hose, Graco sprayer, extension cord + electricity ⚡️ , bucket 🪣 of water to clean, energy bill ect
Like a said , if you have a lot of square footage to paint yes it will be good, but for Rooms.
Awesome video thank you for this. I was curious about these. There are those Mickey mouse plastic clam shell roller sleeve keepers. I bet that would work for a few stops.
I am a diyer and own the graco magnum x7. Is this pretty much the same thing graco sells for the x7 or is it better?
Do they have a 14 or 18" version of these?
Not with the innerfed roller. Graco does make an 18" jet roller which is basically just a roller attachment on a spray tip. Can't tell you how well they work because I've never used one.
What happened to journey man John?
Tried this few new construction jobs. Compared it with 18” rollers. This was much faster and easier. Specially on new drywall where using a lot of material. You can set up your sprayer on 1st floor and paint with this on 5th floor, no 5 gallon buckets to carry. The only problem is it doesn’t have microfiber rollers. One coat of primer and two coats of finish even the 3/8 leaves a big texture on smooth walls.
Thanks for sharing
Bro how you fit time for the gym??
Just make it
Did you just put killz on wall paper on the top and sprayed over it?
I did
@@Idahopainter i always thought that would be a terrible idea but I might try it one day.
Idk man I've tried this rig and I think you a few years ago would have advised against it. Maybe certain applications but you sure you haven't got too Hollywood? Just keeping you honest, love your vids
I just use this on a ceiling last week, way too heavy, my crew try it for 3 mins and give up, i finish 2 ceilings with this roller. Decide to sell the roller and the Titan 440 which I brought last year. I spend 30+ hours to learn how to use sprayer,doesn't work out for me. Too many limitations to use in a residential project
You paint doors, bannisters, spindles, ect by hand?
@@jimeneazy5999 i only get 1 or 2 spindle job per year. I can paint 13-15 doors (including door frame)a day using brush and roller.i had tried with the sprayer. It's 2-3time slower and i break a ceiling light because I was moving door from room to room.
@@wwsunmoon What about louver doors with the slats? I'm usually working remodels for an investor that flips properties and flooring is usually replaced so we spray everything.
Sou pintor profissional aqui no Brasil 🇧🇷
Driving me nuts you going the wrong way on the wall! I would rather use an 18 inch roller
I can do it way faster with an 18 inch nap