Do you also have a part list for this build of yours? It'd be nice. It's been awhile since I've done this kind of stuff. Not late making but building things. Thank you, barry...
Good video sir. Something to consider,if you have a tablesaw, set the blade to 45 degrees and cut off the corners. The 8 small corners will work much faster with less effort. Keep well and God bless.
Eventually you might want to switch out the drill chuck for something a little stronger, drill chucks arent really meant for handling perpendicular forces. It will wear them down fast.
Yeah, those saw blades aren't really meant to handle being pushed into something perpendicular either.. I mean, itll work until something slips and it falls apart, ooor until they cut into an artery... Like, this could work pretty well, but with a router, and a router bit instead of an angle grinder, and a spindle made from some hardened steel, attached to a pulley and countershaft. like if your gonna go through the effort of making a headstock, just a little more work will save you a lot of trouble. @@b3arwithm3
Utilizar discos para corte en madera es muy riesgoso. Si compras tus puezas ya hechas evitaras recoger tus manos del suelo y mucho mascaras te costaran las protesis
A criatividade existe em abundância. Acredito, porém, que se o serviço for ininterrupto, haverá um superaquecimento de ambas as máquinas e a sua possível inutilização. Ou essa hipótese fica descartada?
Bad idea. The circular saw does not cut very well with a side feed. The front edge is slightly blunted + plaque and the disc begins to bend. Плохая идея. Дисковая пила плохо очень режет при боковой подаче. Чуть затупилась передняя грань + налёт и диск начинает отгибать.
Genial colega , los maestros de la madera somos verdaderos ingenieros ,,,,, sin títulos ni universidades , adelante colega somos los mejores
ေေ
Thank you for sharing your knowledge, this lathe is very good.
Wood turning with template , cool
I'm thinking about making a lathe. Thank you for sharing your ideas 👍
Thank you for watching!
Geeeeeniiiiiiooooooo.. sos el Maradona del torno..
You work very well in from Indonesia🇮🇩
Where did you get the blocks to hold the tubes looks great!
километр наждачки чтобы убрать все неровности - красота
Genial idéia. Very Nice 😃
I'm probably going to build something like this, thanks for the inspiration.
Thank you for watching!
Good work. We shared this video on our homemade tools forum this week 😎
buen video me imaginaba que era copiador tambiem saludos
Do you also have a part list for this build of yours? It'd be nice. It's been awhile since I've done this kind of stuff. Not late making but building things. Thank you, barry...
Can we get a part list in the description? No idea what Or where the pieces were sourced
Pekerjaan yang mengagumkan 😊
Creative! Clean shop! Cool video
Thank you!
thanks man..u really open up my eyes towards ur brilliant idea
Thanks bro!
true!!! ^^
Extraordinary creativity ❤
What does what is that hardware that is on the pipe that holds the saw in place with blade so the blade so I can move back and forth freely?
Parabéns lindo trabalho tem como vc manda em PDF esse modelo de peça pra eu cópia aqi ?
Gracias por compartir tus conocimientos
Great way to get a prosthetic
Genius idea man love it.... U have alot of 🧠🧠
Tác phẩm tuyệt vời mong được đồng hành cùng bạn
Cám ơn bạn quan tâm!
Nowatorski rozwiązanie z własnego pomysłu z elektro narzędzi tokarka i funkcjonuje doskonale fajoskia sprawa
Yaxshi zor
Parabéns.
Clever.
Great work...👍👍👍👏
Me gusto muchas gracias
Супер. Красавчик
Amazing
Good
Exelente
Good video sir. Something to consider,if you have a tablesaw, set the blade to 45 degrees and cut off the corners. The 8 small corners will work much faster with less effort. Keep well and God bless.
Thank you for your comment, it's very helpful
Eventually you might want to switch out the drill chuck for something a little stronger, drill chucks arent really meant for handling perpendicular forces. It will wear them down fast.
Putting a saw blade on a grinder shows how much he understands tools
Yeah, those saw blades aren't really meant to handle being pushed into something perpendicular either.. I mean, itll work until something slips and it falls apart, ooor until they cut into an artery...
Like, this could work pretty well, but with a router, and a router bit instead of an angle grinder, and a spindle made from some hardened steel, attached to a pulley and countershaft. like if your gonna go through the effort of making a headstock, just a little more work will save you a lot of trouble.
@@b3arwithm3
Utilizar discos para corte en madera es muy riesgoso.
Si compras tus puezas ya hechas evitaras recoger tus manos del suelo y mucho mascaras te costaran las protesis
Ok
very idea
nice
Show muito bom 👍🏾👏🏾👏🏾👏🏾👏🏾👏🏾🇧🇷
МаншаАллагь чудесное творение
Хорошие балясины выходят 👍👋
Maşallah 👍
Zanimljivo, ali opasno rješenje!🤔
A criatividade existe em abundância. Acredito, porém, que se o serviço for ininterrupto, haverá um superaquecimento de ambas as máquinas e a sua possível inutilização. Ou essa hipótese fica descartada?
How is this better than just a chisel
I guess it seems easier for duplicating work
@@nagaberak3568 assxs uuu
@@elydeespinoza4114 aàaaa
Both rotates..load will be less compared to chisel..I tried angle grinder with bare hands
O SARGENTO( granpo) não é confiável pra esse trabalho..! Más
Interessante! !
..esos de aluminio , son de un bus soviético verdad?
Good idea but with a router.
That's a good idea, maybe I'll do that project.
Thank you for watching and commenting!
What a sneaky devil
They sell a chainsaw blade for an angle grinder that would probably work better than the saw blade that you are using imo 🤷♂️
Надо переставить шаблон ближе себе а то копир сильно длинный и прогибается
Impresionante
Good !
😊👏👏👏👏
Buena idea para Perder los dedos....
♥️♥️♥️♥️♥️
Bravissimo
Thank you!
Muy buena idea. Incluso trabaja con menos exigencia que el desbaste con gubias, ideal para tornos con poca potencia.
От чего алюминиевые кронштейны трубки?
Imaš li ti drug sve zube i ukupnu glavu.Čuvaj se ljudino moja,tako je opasno to raditi!!!!!!!!
Faz taco de Sinuca neste torno?
Opasno po ruke i oci!@!!!
Muito perigoso este disco quebrar e voar no braço ou no rosto teria que está bem protegido.
Thank you!
Luar biasa,baru lihat ini bubu pake gerinda
Genial, entretanto, é muito perigoso!
Bad idea. The circular saw does not cut very well with a side feed. The front edge is slightly blunted + plaque and the disc begins to bend.
Плохая идея. Дисковая пила плохо очень режет при боковой подаче. Чуть затупилась передняя грань + налёт и диск начинает отгибать.
This is the biggest gimmick I've ever seen. Without any security. It becomes a great danger for whoever is operating. I'm from Sao Paulo Brazil.
Now your thinking, I am so amazed how many people do not use cutting oil, and they wonder why their drill bits don't last when drilling into Metal.
Interessante.
De Bsb DF
এটার রেট কত কোথায় পাওয়া যাবে
Can we order how much your price
Could hold 27vinches lengt
Ye sirf TH-cam k like k liye hai ya har Kam aise hi karte ho
Serves no purpose at all. The same job can be achieved with a gouge etc... More power is being used . Unsafe conditions are being created .
Legal muito bom 😮😮😊😊
Muy peligroso,creo que es más confiable con los formones,
Me gustaria elimine tanta vibracion!
Muy peligroso . .
An accident waiting to happen with that blade.
....no me convence, giran en el mismo sentido la madera y cortante hoja.
Prefiero formon y guvias
😂😂😂😂😂😂😂
Бумайдикан бу упит
Бредятина
This is very danger and risky
By
Answer me
Bakwas
Great amputation machine. Stop post shit like this. People will lose their fingers because of silly design like this
Самый настоящий дурдом.
Дрочево! Других словами не описать.
1 de las mil maneras de morir😂
𝚐𝚘𝚘𝚍 𝚒𝚍𝚎𝚊 𝚘𝚏 𝚝𝚑𝚎 𝚐𝚛𝚊𝚝𝚎 𝚠𝚘𝚛𝚔𝚎𝚛
херня. небезопасно и намного дольше и грубее нежели чем резцом !