Nicely done, very clear in showing the steps you use to make these! Was that water you sprayed at the end to raise the grain before final sanding? Is the Osmo good safe once cured?
Dari potongan kayu yg tak seberapa nilai harganya.. Disulap menjadi barang yg sangat mewah dan mahal harganya anda hebat sahabat.. Semoga sehat selalu sahabat. Dukung juga saya sahabt🙏🙏🙏
Hi everyone, question from someone who is starting to look into wood turning. At 07:20 and 12:54 he uses a spray bottle, is it water inside or what, my thinking it's water to keep fibers up for a better sanding and surface finish? Can someone confirm or explain if I'm wrong? Thank you, greetings from Serbia.
Beautiful goblet. I'd would like to purchase some of those I.D. disks for labeling my work. Where do you order those personalized disks from? Thanks. J.B.
@@raytreherne26 thank you first for watching our video. I have use first sanding sealer to seal the wood and for finish coat i have used osmo oil, whitch is food safe.
Thank you. This is the hook tool from Wiedemann. Here is also link neureiter-shop.at/produkte/drechseln/drechselwerkzeuge/wiedemann/wiedemann-hakensystem/drechselmeister-ausdrehhaken-gerade.html You have two versions of this hook tools. One is for making flat bottom and one for making round bottom if you know what i mean. If you need some more info, you just write. Happy holidays
Hello. First i wish you a happy new year. The hollowing tool that i have used is from WIEDEMANN company. Here is link. neureiter-shop.at/produkte/drechseln/drechselwerkzeuge/wiedemann/wiedemann-hakensystem/drechselmeister-ausdrehhaken-gerade.html
Thanks for watching. The spray is water or denatured alcohol that raises the grain in the wood. If you do that and then sand it again, the finish will be smoother when the goblets are used.
Hello. Thank you. If you want that is all the same sizes you have to have copy machine. I don't have that. I just mesure every goblet seperatly. Because of that is every goblet that i made uniqe
Hello. Thank you for watching. In this goblets i have use for seal sanding sealer and osmo oil. I did't test with other than wine and water and it was ok.
This is not turning, it's just scrapping wood, but it's funny and a good start for rookies. You HAVE to cut the wood, not scrape it, use every tool with the right angle forward and backwards, change direction of turning, when needed, and pay attention of hook - then you'll be sanding almost nothing. The cuts are clean and polished. As to impregnation, apply bees wax, mixed with medical terpertyne with a wool cloth at high speed - this is the best and the most natural insulation for wood & food products. I haven't watched your channel, and don't want to sound rude, excuse me if so! Just had to give my way of seeing and understanding how to turn wood. Congrats for sharing this art, and remember - we can always get better!
🚀 Elevate your uniform style with @AlphaDTFPrint's latest post! Discover the artistry of DTF printing on military tees. What's your preferred way of adding a personal touch to your uniforms? 💫 #DTFprinting #UniformArtistry
Your commitment to achieving a stunning finish is truly admirable. The result is nothing short of perfection absolutely flawless.
Thank you very much for your comment. It means a lot to us😊😊😊😊
Absolutly amazing woodturning!!!
Never seen so fine woodturning!!!
Only in finest dimensions!!! Thin like real wine glasses.... great job!!! 🎩👍👍
Thank you very much!
Very good lathe working ❤ the skill of the carpenter using the chisel .
A lovely goblet made from oak 😍 🙋😍
Thank you very much....... 😊😊😊😊😁😉
Wow what a talent. I have just subscribed to your channel. You are truly gifted. You have blessed my afternoon. Thank you so much
Thank you..we try to do the best 😊
The products are created with very good quality
Thank you very much😊😊😊😊😊
Awsome Job buddy🤗
Thank you. I have learn alot from you, so thank you!
Great one minute video. :)
Thank you for watching. But what do you mean with one minute video. This video is more that 16 minutes long. Is something wrong with video?
Please my support 🙏🙏🙏🙏
Great job 👍👍👍
@@Pipejawood-Woodturning Because you don't say anything I just skip through the video. Saves me time.
That was really great.
Awesome video !!! Learned a lot.
@207crafts Thank you very much. I am very happy that I helped you!
Very very amazing
Thank you 😊😊😊
That was really great.
Thanks for the info!! Merry Christmas!!!
Thank you. Marry Christmas to you?
That was really great.
Amazing 👌❤
Thanks 😉😁😊
@@Pipejawood-Woodturning 🙏🤝
C'est tres bien travail
Thank you very much 😊😊😊
Excellent video 👍
Thank you😊😊😊
Que buen video amigo like a este cracks😎
Thank you very much😊😊😊😊
عمل رائع
Thank you very much
Craftsman at his best
Thank you
Excelente trabajo Gracias por compartir tu Arte (Francisco de Paraná Entre Ríos Argentina)
Thank you for watching our video. Greetings from Slovenia 😊😊😊
Bravo Awesome Man
Thank you very much😊😊😊😊
Дуже цікава робота.
thank you😊😊😊
Good job 👍
Thank you☺️☺️☺️
Cool amazing amazing
@@JATIFORTUNACHANNEL thank you very much.
Belo trabalho parabéns 😊
Thank you very much😊😊😊
Very Nice ...
Thank you😊😊😊😊
Very nice well done.
Thank you😊😊😊😉
That was really great.
Чудова робота! Дерево клеєне із частин. Чи можна наливати рідину не розклеіться? Який клей використовуєте?
Hello. Thank you for watching. Yes, I glued 3 blocks together and I used Titebond III wood glue because it is waterproof.
Щиро вдячний!
!@@Pipejawood-Woodturning
You are welcome 😊😊😉
Excellent. Amazing work. God bless you always.
Thank you very much😊😊😊
That was really great.
@@JuiceRiver-ei1jc thank you 😊😊😊😊
Thanks Sir, for your beautifully crafted
Thank you for visiting our channel 😊😉😊
No any suggestions, no any comment about your wood turning work. Your work is very fine.
@@durgasubarnakar1306 thank you.
Waw a mazing skill keep it up well done👍👍👍👏👏👏
Thank you very much😊😊😊😊😊😉
love it !
Thank you 😊😊😊
Man, I enjoy turning too. I just learned a couple of tricks watching you. Thank you and great work!
Awesome! Thank you!
Good 👍
Thank you 😊
Nicely done, very clear in showing the steps you use to make these! Was that water you sprayed at the end to raise the grain before final sanding? Is the Osmo good safe once cured?
Hello. Thank you for watching our video. I spray denatural alcohol because it dry quickly and yes the osmo oil has certificate that is food safe.
That was really great.
Good jod!!!
Thank you very much 😊😊😊😊
New subscribed from Somalia
Welcome to our channel and greetings from Slovenia.
You're excellent bro
Thank you man😊😊😊😊
عمل اكثر من رائع اتمني يوما ان تكون لي مخرطة خشب
شكرًا لك. أبقي إصبعي متقاطعًا حتى يحصل عليه في أسرع وقت ممكن
I love working on a lathe, but I haven't gotten one yet
@OmarFdalaine working on lathe is for me like relaxation😁😊
@@Pipejawood-Woodturningشكرا لك انا من الجزائر اتابع اعمالك دائما
We are very thankful that you follow us and hope that we will satisfy you in the future. Greetings from Slovenia 🇸🇮
Exquisite making
Thanks ❤️😊
Комментарий в поддержку канала и ролика, а также труда мастера.
спасибо за ваш комментарий и за вашу поддержку. это очень много значит для нас. Спасибо
How nice
Thank you
👏👏👏👏👍
Dari potongan kayu yg tak seberapa nilai harganya.. Disulap menjadi barang yg sangat mewah dan mahal harganya anda hebat sahabat.. Semoga sehat selalu sahabat. Dukung juga saya sahabt🙏🙏🙏
Thank you for your comment. In woodturning, wood is always transformed from firewood into something nice. 😊😊😊
Respekt!
Thank you 😊😊😊😉
Muito bom parabéns
Thank you 😊😉
👏👏👏👏
Thank you!☺️☺️☺️🇸🇮
Do you ever take any requests for a mug or goblet for hire?
Do you mean if i allrady sell any of them?
@@Pipejawood-Woodturning Yes, do you sell things you make?
@@sidbrowning9211 yes off course. We have Etsy store. pipejawood.etsy.com
Muito Bom
Thanks 😊
Hi everyone, question from someone who is starting to look into wood turning.
At 07:20 and 12:54 he uses a spray bottle, is it water inside or what, my thinking it's water to keep fibers up for a better sanding and surface finish?
Can someone confirm or explain if I'm wrong?
Thank you, greetings from Serbia.
Hello. You are write I use denatural alcohol to keep fibers up. But you can use also water. GREETINGS FROM Slovenija
Very nicely done!! The final finish; it's liquid proof?? Water? Wine??
Thank you. Yes the final finish it's liquid proof. I have tested them. I have coated them with osmo oil that is also hot resisted
Where do you get your wood from?
Hello. Most the time i use my own wood. Otherwise i use wood from local people.
Subbed
Thank you very much for subscribe to our channel
Beautiful goblet. I'd would like to purchase some of those I.D. disks for labeling my work. Where do you order those personalized disks from? Thanks. J.B.
Hello and thank you. If you mean this discs that are in the bottom? This discs i make my selfe with my laser
That was really great.
Very very amazing😍😍😍😍🥰
Thank you very much!😊😊😊
@@Pipejawood-Woodturning please suport to my channel 🙏🙏🙏🙏🙏🙏
Very² amazing lol 🫵😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂
youtube.com/@threestarfancywoodworks1902?si=z8jlLF7-2vdB5r1T
What do you seal it with to stop contamination and staining
@@raytreherne26 thank you first for watching our video. I have use first sanding sealer to seal the wood and for finish coat i have used osmo oil, whitch is food safe.
That was a great video and I learned a lot
Would you mind sharing - what tool were you using to Hollow out The goblet?
Thanks
Chuck
Hello and thank you for watching our video. Hollowing tool is Gamma Zinken. Here is link www.tobi.si/en/Termite-4243-insert
Very nice, where to get this plates?
Thank you , we make this plates from ourselves 😀
Wawoooo very nice I want to know how make it
Thank you. If you watch our video, you can see how to make it but if you have any additional questions we are here to answer😊😊
👍👍👍👍
Muito bonito, deixa eu perguntar qual o nome da goiva que vc faz o desbaste interno ?
Thank you. This is the hook tool from Wiedemann. Here is also link neureiter-shop.at/produkte/drechseln/drechselwerkzeuge/wiedemann/wiedemann-hakensystem/drechselmeister-ausdrehhaken-gerade.html
You have two versions of this hook tools. One is for making flat bottom and one for making round bottom if you know what i mean. If you need some more info, you just write. Happy holidays
You make using traditional tools look so easy! And when I try I end up with it stuck in my ceiling. Haha. Looks good!
Thank you for watching our video. When i start turning i have also make many mistakes, but with practice i start to know how to use this tools.
What is the hollowing tool you are using ?
Hello. First i wish you a happy new year. The hollowing tool that i have used is from WIEDEMANN company. Here is link. neureiter-shop.at/produkte/drechseln/drechselwerkzeuge/wiedemann/wiedemann-hakensystem/drechselmeister-ausdrehhaken-gerade.html
❤
What is the spray ?
The spray you used after polish
Thanks for watching. The spray is water or denatured alcohol that raises the grain in the wood. If you do that and then sand it again, the finish will be smoother when the goblets are used.
@@corentinlavigne-zf4qj12:57 this is denatural alcohol
@ thanks a lot
@corentinlavigne-zf4qj you are welcome.
great job! Tell me, how can we mass produce products so that they are the same in size and proportions?
Hello. Thank you. If you want that is all the same sizes you have to have copy machine. I don't have that. I just mesure every goblet seperatly. Because of that is every goblet that i made uniqe
@@Pipejawood-Woodturning thank u!!!
Excellent video! Where do you get the glue on discs that advertise you? In all my searches all I come up with is stickers and pin on buttons. Thanks
Thank you! You mean CA glue with hardener? This glue i buy in local store in Slovenia
No-The metal discs that has your logo@@Pipejawood-Woodturning
Metal disks i make my selfe, if you mean glue like in 16:00 i order on Aliexpress
Where do you get the metal plate with your company name on them
We make them our selfe
Oh ok you must have a cnc or the like....thank you for the quick reply@@Pipejawood-Woodturning
Yes we have a laser
What do you use to seal these for use? Is it alcohol safe?
Hello. Thank you for watching. In this goblets i have use for seal sanding sealer and osmo oil. I did't test with other than wine and water and it was ok.
ไม้เนิ้ออ่อนเนื้อแข็ง...ทำขายดูอายุตัดแกะง่ายๆ⚡ต้องใช้งาน...มีคมอย่างเดียว👁👌จับผิดจบงานเสียความชำนาญไม่มีมนงานขาย❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
Thank you for your comment. I will be very happy if you can write in English language, that i can understand
😀👍👍👍👍👍👏👏👏
Thanks
Разве можно делать бокалы из клееного бруска ?
спасибо, что посмотрели наше видео. Я думаю, что это можно сделать, но это нужно склеить. Вопрос в том, выдержит ли стакан воду.
Я это и имел в виду.
can you write in eanglish, because i don't know what do you mean with your answer
Kya ya mil skta h dear
Thank you for your comment. Can you please write in English?
Very cool. The video had constant adds blocking the video which was not very fun
Thank you. I am sory about adds. I think that this don't have something with my video. This is youtube.
How.tha.price
@@karamilsundarkaramilsundar3337 hello. You can see the price on pur web page www.pipejawood.com/collections/handmade-goblets
VIP PRO
Hello. What do you mean with that?
Can you give dimensions of starting block and finish product?
Yes of course. Starting block was 17cm by 9,5cm and finishing product is 15cm by 8cm.
Salla Allahou halla Mohamed
Thanks😊
Teach me please
Tell me what do you want?
This is not turning, it's just scrapping wood, but it's funny and a good start for rookies. You HAVE to cut the wood, not scrape it, use every tool with the right angle forward and backwards, change direction of turning, when needed, and pay attention of hook - then you'll be sanding almost nothing. The cuts are clean and polished. As to impregnation, apply bees wax, mixed with medical terpertyne with a wool cloth at high speed - this is the best and the most natural insulation for wood & food products. I haven't watched your channel, and don't want to sound rude, excuse me if so! Just had to give my way of seeing and understanding how to turn wood. Congrats for sharing this art, and remember - we can always get better!
You are totally right; we can always be better. Thank you for your opinion!
Супер💪💪💪👍👍🦾🦾
Thank you very much!!!!
🚀 Elevate your uniform style with @AlphaDTFPrint's latest post! Discover the artistry of DTF printing on military tees. What's your preferred way of adding a personal touch to your uniforms? 💫 #DTFprinting #UniformArtistry
I'm sorry, but I don't know what your comment has to do with my video
มีดกลึงทำเองหรือคนรับ
Lathe that i have is from company Jet. This is old lathe made in US. Now is that Powermatic
Mabagal ang proseso ng pag gawaga
tambah males
Thank you for watching. I have translate your language and I don't know what do you mean with more lazy
No thanks. I don't want to watch you play with your tool. How about some advice?
Thanks for watching. what advice do you have for us?