Thank you for the assembly video! What an excellent aircraft!! I'm seriously looking at building this as a family project. (Just downloaded!) An idea: A one-piece wing printed with the fences? Just a thought.
Hi, wonderful build! Silly question but im stumped...how do you configure the transmitter so both rudders move with elevation and worh left or right independent movement. I have a Radiolink AT10 ii.
It is Kyle's philosophy not to have any locator holes, and you don't need them! There is a mark at the bottom to align feet 1-3 and the rest will follow - if there is a second version, there won't be any pins there either.
Very beautifull. Can you provide any information about this black collar you are using on the glue gun? Can you also provide information about this bottle of glue with a green lid that you are using? What is this spray can for? Can you provide information about that?
I print so much that I hardly pay attention to it! I usually print on 3-4 printers at the same time, then I have a plane ready in 12-16 hours! I only printed the Dark NGAD on the P1S and it took about 2 days!
Have to watch it second time, first time i was just listening background music 🕺
I hope there will be holes and pins between parts to simplify assembly and improve assembly accuracy and portability!
Absolutly magnificent model and for seeing one fly from another guy here, it fly extremly well. . .
This looks great! Is there any way to open up a little and fit a twin 50mm?
Nice project! It is clear that the tailless boat immediately begins to have problems with directional stability and yaw, and you solve these problems.
Beautiful video!
Bravo! That was splendid and very comprehensive. You have quenched my curiosity.👍
Thanks for what you do!!
Stick the twin fins on the back and you have the original F-19 but with a more squared off wing ;)
Thank you for the assembly video! What an excellent aircraft!! I'm seriously looking at building this as a family project. (Just downloaded!) An idea: A one-piece wing printed with the fences? Just a thought.
A total professional builder, you pay attention to detail and that is key to a good product.
Hi, wonderful build! Silly question but im stumped...how do you configure the transmitter so both rudders move with elevation and worh left or right independent movement. I have a Radiolink AT10 ii.
@@trapking4459 with elevon Aileron mix!
@@theuer5481 ok thank you for responding
Very well done, thanks for this video. Any pointers on printing the LW-PLA parts?
Sweet Thanks
Great an informative video, just wondering what is the overall weight of the print
@@stuartsandiford 413g without Lipo!
No locator holes on any of the large parts? Why not? Think I'll wait for a version 2
It is Kyle's philosophy not to have any locator holes, and you don't need them! There is a mark at the bottom to align feet 1-3 and the rest will follow - if there is a second version, there won't be any pins there either.
Very beautifull.
Can you provide any information about this black collar you are using on the glue gun?
Can you also provide information about this bottle of glue with a green lid that you are using?
What is this spray can for? Can you provide information about that?
You can buy different colors of hot glue Sticks (Steinel), Industrial CA Glue Medium (German Amazon), Activator for CA Glue (German Amazon)
The Black collar is a cutted Medical needle - you can ask your local Pharmacy there can you buy! Outer Diameter is 0.9mm
@@theuer5481 Obrigado vou pesquisar
what would you charge me to 3d print this plane same size as shown ????
This looks awesome! How much does it weight assembled?
413g without Lipo
I didn't see where it says what nozzle size you recommend to print with under your print settings.
I Print with Nozzle 0.4mm, 0.24 Layer hight. You Can find nearly the setings by 3DLab or JPT.
Can I ask what software are you you using for this plane?
@@chickenychickens07 we use Shapr3D
@@theuer5481 thank!
I’m curious as to how long did it took to print all the parts?
I print so much that I hardly pay attention to it! I usually print on 3-4 printers at the same time, then I have a plane ready in 12-16 hours! I only printed the Dark NGAD on the P1S and it took about 2 days!
@@theuer5481 So the quick answer is around 2 days on a single printer.
Thanks.
Just curios what flight controller do you use?
I use only what you see in the Video (1:58-2:13)
666 666