More detail on Radiator damage easily avoided plus a couple of other problems

แชร์
ฝัง
  • เผยแพร่เมื่อ 28 ม.ค. 2025

ความคิดเห็น • 10

  • @johnallen3555
    @johnallen3555 20 วันที่ผ่านมา +1

    easy fix options
    - circlip and some spacer washers
    - clean it all up and a big dose of sicaflex on the circlip side when it is protuding ( bit like a "sicalex fillet weld around the pin
    - Your split pin idea is good, but worried about drill access??

    • @lennarderceg8152
      @lennarderceg8152 19 วันที่ผ่านมา

      John, while the metal round end is protruding out of the chassis your idea looks the easiest fix. Sicaflex would keep it from moving back especially if there’s a circlip and spacer washers involved.🤓👍

  • @HML-it7te
    @HML-it7te 20 วันที่ผ่านมา

    Worm drive hose clamp? (The ones you don’t use on radiator hoses as self tension genuine are best).
    Another option is Stainless Steel single strand wire (approx 2mm dia), wrap around twice, then use pliers twist as you pull hard, gives it a neat even twist.

  • @radioaustralia5070
    @radioaustralia5070 20 วันที่ผ่านมา

    I put a metal cable tie around it from Bunnings and it stopped it moving Forward. I didn't use the plastic cable tie because they break down from heat.

  • @Abbonorvall
    @Abbonorvall 20 วันที่ผ่านมา

    One thing I learned with my 4lt, if you replace one idler pulley for the belt, do them all. Initially I replaced one with a noisy bearing and it would throw the belt in 200km, replaced the rest and baddaboom!

  • @moballerAk47
    @moballerAk47 18 วันที่ผ่านมา

    Would u ever sell ur Prado this specific model ?

  • @markorlando4817
    @markorlando4817 20 วันที่ผ่านมา

    I need to measure those

  • @ACCOD
    @ACCOD 20 วันที่ผ่านมา

    I would drill & put split pin in.