Suzuki Burgman 400 - Valve Clearance - Part 4 - Installation 2007-2016 | Mitch's Scooter Stuff

In this video I show you how to put everything back together (throttle body, air filter and more!)
Left side skirt cover installation video: • Suzuki Burgman 400 - L...
Videos in order to do this service:
Part 1 Getting ready for inspection - • Suzuki Burgman 400 Val...
Part 2 Clearance Inspecting valves - • Suzuki Burgman 400 Val...
Part 3 Adjusting valves - • Suzuki Burgman 400: Va...
Part 4 Putting all back together - • Suzuki Burgman 400 - V...
Tools I used in this video:
Phillips #2 screwdriver - amzn.to/2fgdZDL
Ratchet 3/8 drive - amzn.to/2hhmnUs
8mm socket 3/8 drive - amzn.to/2xLNVXU
10mm socket 3/8 drive - amzn.to/2xGuLSF
10mm wrench - amzn.to/2hqqYDW
3" / 6” extension set 3/8 drive - amzn.to/2h7ypMl
Torque wrench 0-150 lb/ft 3/8 drive - amzn.to/2Crqq4R
Spark plug wrench (in tool kit bag)
SHOP MY SCOOTER STUFF (GEAR & TOOLS I USE: amzn.to/2CbqQku
Want more free Scooter Tip / Tutorial videos - Please support MicBergsma!
Paypal donation: bit.ly/2fghrwN
*******************************************************
TH-cam - 2nd channel - bit.ly/2g4i5d5
Instagram - bit.ly/2fB8gay
Facebook - bit.ly/2gEsYpt
Google Plus - bit.ly/2fPb423
******************************************************
Filmed by Mitch Bergsma
Edited on Final Cut Pro X on Mac
Scooter Intro edit by Erik Lauritzen
Check out his websites: bit.ly/2gQe8d4
IMPORTANT
Please only use and share this embed code of the original video.
Third party downloads and distribution is not permitted.
If you are interested in buying footage or for booking information please contact:
[e-mail]
#suzukiburgman #suzukiburgman400 #burgman400

[@MitchsScooterStuff]

Tools I used in this video:
Phillips #2 screwdriver - amzn.to/2fgdZDL
Ratchet 3/8 drive - amzn.to/2hhmnUs
8mm socket 3/8 drive - amzn.to/2xLNVXU
10mm socket 3/8 drive - amzn.to/2xGuLSF
10mm wrench - amzn.to/2hqqYDW
3" / 6” extension set 3/8 drive - amzn.to/2h7ypMl
Torque wrench 0-150 lb/ft 3/8 drive - amzn.to/2Crqq4R
Spark plug wrench (in tool kit bag)
SHOP MY SCOOTER STUFF: amzn.to/2CbqQku
Want more free Scooter Tip / Tutorial videos - Please support MicBergsma!
Paypal donation: bit.ly/2fghrwN

[@عليالناصري-ث8و]

Do you know..I love you bro...😘. But I need you to something!!

[@mhdoesburg-michdoes]

thanks for the video TOP that you make did It very help full TOP TOP

[@hacksaw413]

Thank you very much. Don't know if I can do it but it will be easier with the video. Looking for a 400 now. What do you think about the scooter? Thanks again.

[@Excalibure666]

Hey Mitch, Can you make a video about "deglazing clutch pads" Thanks!!

[@Brakballe]

First of all: This is a JAPAN product so start with DITCH all Phillips crosshead drivers and get JIS standard ones or welcome to stripped heads.. especially those lids on the brake reservoir! A JIS standard crosshead screw is easily identified by it usually have a dot imprinted just at the cross on the head of the screw ;)

[@MitchsScooterStuff]

Awesome I will check it out, thanks!

[@ewob52h74]

Here's a quote from Webbikeworld in 2016: "True JIS screws haven’t been used since Yamaha was still making two-stroke street bikes." Phillips crosshead drivers are fine for JIS.

[@Brakballe]

@@ewob52h74 100% BS