Just watched your other video of taking your 48 for a drive. For some reason there was no way to comment on it but I have a question. I noticed your aftermarket dual temperature gauges and want to do the same with mine. I’m still running stock 6v positive ground and wondering ,if your the same, where you got the gauges ( are there different gauges for 6v systems or will standard gauges work?)and I assume that you had to replace the temperature probe on the right side of the block to a single post or can you keep the factory 2 post.
So was the purpose of drilling the wing window screw holes because you used a new frame? Or do the old holes in the frame not line up with the old holes in the door with the new rubber?
Have you done a door rebuild? I'm getting ready to. Replacing vent windows and door glass. I'm doing the doors while their on the truck. Seems better for me. My question. While the vent window is out can I just drop the new window in from the top and just leave it sit on the bottom of the door while I put in the vent window and then with the divider attached just at the top put the glass into the tracks , slide it up and attach it to the regular and then adjust and attach the bottom of the divider? Just seen this video. Not a lot of info out there. I've just been giving it some thought. Thanks
Thanks for the demonstration.
Actually, the window does fit in through the door access hole. Much easier than fitting it through the top!
Thank you, saves a lot of frustration.
Thank you! I would’ve broken something trying to take off the interior door handles 🙏🏼
Thanks for doing this! Nice job
Good work!
Thank you for making this
Thanks very helpful video!
Thankyou. Great information
Helpful, thanks!
Thanks for the vídeo hopefully it work for me.
Just watched your other video of taking your 48 for a drive. For some reason there was no way to comment on it but I have a question.
I noticed your aftermarket dual temperature gauges and want to do the same with mine.
I’m still running stock 6v positive ground and wondering ,if your the same, where you got the gauges ( are there different gauges for 6v systems or will standard gauges work?)and I assume that you had to replace the temperature probe on the right side of the block to a single post or can you keep the factory 2 post.
So was the purpose of drilling the wing window screw holes because you used a new frame? Or do the old holes in the frame not line up with the old holes in the door with the new rubber?
Glas goes in up through hole in door.
Have you done a door rebuild? I'm getting ready to. Replacing vent windows and door glass. I'm doing the doors while their on the truck. Seems better for me. My question. While the vent window is out can I just drop the new window in from the top and just leave it sit on the bottom of the door while I put in the vent window and then with the divider attached just at the top put the glass into the tracks , slide it up and attach it to the regular and then adjust and attach the bottom of the divider? Just seen this video. Not a lot of info out there. I've just been giving it some thought. Thanks