Holmes Hobbies Puller Pro V2 4100 Losi Hammer Rey Castle Mamba X
ฝัง
- เผยแพร่เมื่อ 29 มิ.ย. 2024
- This motor is INSANE!!! NO KIDDING!!! Seriously impressive
Holmes 4100kv Motor
Holmes Hobby holmeshobbies.com/motors/brus...
Amain bit.ly/3almr0u
Ebay ebay.us/3MnkTX
Castle Mamba X ESC
Holmes Hobby holmeshobbies.com/electronics...
Amain bit.ly/338F0Oz
Ebay ebay.us/grLgLr
Losi Hammer Rey
Amain bit.ly/3MyYz7I (Red)
Amain bit.ly/3PzuWoC (Green)
Horizon bit.ly/39DpG39 (Both Colors)
Amazon amzn.to/3lxsFMU (Red)
Amazon amzn.to/3Mwwqy5 (Green)
CNHL 8000mah 3s
Amazon amzn.to/3MzbZki
Are you a Bass Fisherman? Check out Headbanger Lures bit.ly/3MIFpvZ
Want some badaxx shirts? Check out Armed American Supply here
CHANNEL MEMBER INFO
If you would like support Exocaged RC Directly, consider being a channel member. Cheap monthly membership fees, they are $1.99, $4.99, $9.99 and for the big guys $24.99. Take a look! / @exocagedrc
Get Upside, I use this every time I fill up and just let it earn and fro till Christmas time and cash out. It works and once you get used to it, it’s an easy habit.
Click this link or use promo code 9H6W8 to get an extra $2.22 bonus the first time you make a purchase. upside.app.link/9H6W8
#rccar #hammer #u4 - บันเทิง
I like how the closed up the sides to keep all the dirt out
Dude I love you man never fail me this is like waking up to watch sat morning cartoons old school style thank you 😊
Nice! I have that exact combo in my yeti and I was thinking last night of swapping it into my hammer rey after my Reefs raw 500 servo gets here so I have a bombproof electronics set up. Thanks for the video!
Now that’s better! That’s rig looks right at home bashing than it did on the rocks.
Epic jump and landing 😎
That’s a rad looking car
definitely rips with that holmes hobbies motor.
Yo that was a very nice jump and the slow motion editing so good
That was a nice run and yeah that motor is a right screamer. Kind of reminds me of my Kyosho Mad Van with its 4000kv motor, that thing screams pretty well too just on 2s
Bro this is the Best video for this RC
Good video man. Great landing on last big jump!
Thanks!
I have this exact combo on my axial bomber on 3s. It rips!!
Looks like a clean chassis with lots of room
Nice move catching that downside! 👍
You should lock the rear diff and do a video. Would help it crawling and drift probably
Definitely landed in a good spot not only was it on the down slot but it looked like back fill - soft dirt. Slap some Mombas on it lol
Cool vid Exo 🔥👍✌️
I have this exact combo in my TRX-6 and it's FREAKIN NUTTS!!! My all round favorite vehicle I own. By allot. Lol
awesome Video!! Man, sometimes you have to know when to say when, and you did. That was an awesome launch. Question, i don't remember you saying what pinion you were running or spur gear size. any addition info would help. And thank you in advance
What does changing timing do? I’ve been in the hobby about a year and have a channel now but I’m still learning a lot of the technical stuff.
From B E C to the E S C, the thing works.
Hey Joe can you fit a fan on the motor? Have you run into any heat issues since this swap? I just ordered one today and I'll be looking at different options as well. That jump was sick!
Awesome, are those pro puller motors still not sealed?
Been looking at these rigs but can’t justify the cost cause it needs some work to make it an all around basher/ crawler..
Would need to change esc/motor and lock up the front and rear diffs.
The video was made with puller pro 4100 kv but I want more power 6000 kv
I'd love to race a truck like that with other drivers on a Sandy track like yours . It doesn't look much fun by yourself .
I don't know about that. I struggle to find a good loose or loamy dirt to run my vehicle in
Great video! Do you think this motor will go well on the LMT?
What other cars or trucks would you recommend that motor esc combo to put into?
Would be great to see a stronger rear sway bar that fits into the stock position.
I really like the looks of this car, but your video has allowed me to see that rear end geometry is really bad. The attachment of the upper link needs to be as close to the pivot point of the lower arm as possible. The way it's attached now causes the rear end to pivot throughout the travel causing extreme u-joint angles. It looks like they may have done this due to the battery location, without seeing the actual car not sure how restrictive this is, correcting the geometry hopefully would just make battery insertion more difficult, if it makes it impossible you may be stuck with drive shafts problems.
Has the 3D printer compositions gotten better? My last printer, pla was extremely brittle & hard. (Wanting another printer)
Your rear driveshaft is out of phase 😎
Wonder if they fixed the dif issues that br and rr had. Recently got br and dang even on 2s front dif makes noises sometimes the dif pinion had super tiny bearings.
Idk if hr comes with it but rear locker in my br makes it so much more fun to drive and slide
I have both and I've had everything but diff issues, LOL! A and Trailing arms, shocks, output, steering bellcrank and it goes on. They are both shelf queens at this point.
hey guys, what shocks do you recomend?
Please help, I bought a 3100 Casle motor but the shaft is too long and hits inside the housing, did you run into this problem with your new motor?
Joe pretending to be Rick Flair over here !!!! Wooooo !
What size pinion are you running with this motor?
What castle motor is equivalent to that motor?
Have you seen the movie Flying Cars?
gotta ask ... since this is a u4 racer why didnt you go with the PULLER PRO 4274 1/8TH SCALE COMPETITION BRUSHLESS MOTOR ? or save $55 and get a Hobbywing
EZRUN 4274 SL Motor with a max 8 esc ?
I’m working through mods right now as I want mine to be 6s. The stock motor is 36 in diameter and only have room for like 70mm in length. I haven’t got to the motor yet to start thinking about how to make it work but there has to be a way.
😁👍🛫🛩️
We’re you just waking up in this video or not feeling well you sound a little different
The way that seems to handle reminds of a stretched out wendigo! Just rolls over a little less!
This is the only way to get better from this vehicles
I gotta say it…
As nice as it looks..
it’s an absolute waste of everything..
There is a better cheaper vehicles for everything and there are vehicles that are cheaper and waaaaaaay more versatile..
This is an absolute loss in the Losi column..
Just my opinion..