Меня удивляет то что людей вообще не смущает что их называют при каждой сварки подшипника долбоёбами и дальше выкладывают видео с этой чудной операцией
Some of these are pretty amusing. The time it takes to fabricate those gadgets for clipping bits of slender rod into shorter lengths would allow you to make a lifetime of cuts in the same material with a grinder and cutting disk.
the guillotine made from an open ended spanner won't work for long as the fixed blade the spanner works against is only mild steel. i suspect the rod being cut is very hard and brittle to snap like that. i would think a mild steel rod would bend upwards and not be cut.
что мешает резать проволоку и квадрат с помощью УШМ ? Сварка подшипника вообще без комментариев. Для того чтоб стягивать стропу есть уже давно заводское решение, гораздо более практичное.
@@evgen154rus2 значит и сварки не будет без электричества чтоб херней не занимался это раз. во вторых чтоб эту херню сделать он пользовался УШМ, значит есть, это два. Умник.
@@user-ln1ee3cn5q Я тебе в принципе говорю! Проволока есть я резать не чем, вот для этого и делается подобная штуковина, если ты реально в "поле" ❗🥴Умник.
@@evgen154rus2 если я реально в поле то я воспользуюсь генератором, если его нет то я и не полезу в поле чтоб чтото делать, на худой конец существует такой инструмент как ручной болторез, который легко справляется с катанкой 8 мм, возможно даже пруток десятку осилит, но я не пробовал.
Why do TH-cam welders use this weird, multiple tack weld method instead of using a smaller rod, lower amps to put down a beautiful continuous bead. It irritates me to death. Learn to weld!
The concepts are all awesome but so many problems with assembly. I was sad watching a bearing get welded.. especially since it was a sealed bearing!. For that application an oil bronze bushing would work fine.. even just a regular bronze or brass bushing. Never weld on a sealed bearing. One you burn out all the grease inside (notice the small time it was on fire) and also, the weld is not going to hold. Bearing races are high carbon hardened steel. They do not weld very well.
You have to buy a bunch of power tools, lathe, welding machine and a whole array of hand tools to make some manual tools from not so scrap metal and parts. 😂
Usually people already had most of these regular store-bought hand tools to do some of this work only those who don't are really making it difficult and expensive if they already have them it's easy cheap
Overall, this is a highly informative and enjoyable video for anyone interested in engineering. It showcases your talent and expertise while providing valuable insights and inspiration to fellow enthusiasts. Keep up the great work, and I look forward to watching more of your content in the future 👍👍👍
Mantap bosque👍👍👍 salam kenal
Меня всегда удивляет, как вы умудряетесь подшипник приварить к железу?🤔😂😂😂
меня удивляет в этом видео вообще почти всё...
Меня удивляет то что людей вообще не смущает что их называют при каждой сварки подшипника долбоёбами и дальше выкладывают видео с этой чудной операцией
Buenos días hermano excelente herramienta gracias por enseñar desde Venezuela Carabobo Ali Molina bendiciones 🙏
Amazing diy tools thanks for sharing
При просмотре подобных видео в голове сама собой начинает играть мелодия "would i give"...
Very beautiful and best
Thật tuyệt vời chúc a sức khỏe và thành công trong cuộc sống
Привет Мастеру благодарю за видео зачёт вам...,,,
Замечательно, спасибо! 🙋
Thank you very awesome ideas I will try some thanks👍👍.
Wow brilliant idea great sir thank you for sharing.
The third hand tool seems pretty good quality design. If you happen to have the materials like a random 100mm? ball bearing for a base weight.
Wow nice tool
God bless us 🙏
Good job friend,waithing next video
Olá
Projetos muito bom. Excelente
Also visit my chanel brother
Some of these are pretty amusing. The time it takes to fabricate those gadgets for clipping bits of slender rod into shorter lengths would allow you to make a lifetime of cuts in the same material with a grinder and cutting disk.
Very interesting diy...useful tools and i will make it for my workshop..thank you..regards⚘🍻
Muito profissional . Top demais!
K KK KK KKN njjkkknnkk JJ JJ JJ
Best idea, thank you
Mantap bos ku
Great innovations! But please ensure you practice SAFELY procedures...like
Wear gloves
Don't remove safely guard on grinder
Very professional work, Thanks my friend, Big like ♥️♥️♥️♥️
BOM TRABALHO MESTRE . ÓTIMO VIDEO, 👍. 🇧🇷
Chia sẽ hay 👍🏻
В любой непонятной ситуации приваривай подшипник))))
the guillotine made from an open ended spanner won't work for long as the fixed blade the spanner works against is only mild steel. i suspect the rod being cut is very hard and brittle to snap like that. i would think a mild steel rod would bend upwards and not be cut.
it turns out well, it's a pity that I don't have a lathe and a plasma cutter , class
2:34 😮 oh my goodness, will try at home
Great job
Nice video, thanks for sharing it :)
Гениально и просто...
Гибочные и режущие инструменты из лома сделанные благодаря сварке.
wow amazing talent im really enjoy for watching
sat vụn qua bàn tay thợ thì tuyệt vời
Блин,да тут все годное.Подписался и палец вверх поставил.Продолжай и дальше бро!!!
Good works❤❤❤❤
excelente ! thanks
Interesting stuff but make a tap wrench and way to hold steel on table when drill it
Very nice 🙂👍👍
very good idea
انت مهندس رائع
Good ii boss 👍👍😊
i like this video thank you for sharing it to view and i wish your channel more successes
Super tare.
Wow! All these tools are useful 👏
Good job
Good 👍😊
It's magic ❤
Buenos días amigo, podrás hacer una maquina más robusta que se pueda romper fierros de 5/8.
Bravo 👋👍🏻
Ну кто варится к подшипнику? Тут и обойма в самый раз подошла б.А так идея хорошая из за малого радиуса на углах.
good find
Make a hidraulic press using hidraulic car jack.
Goodvideo
👏👏👏.....👌👍👍👍
Обратите внимание на его руки !!!! Ему 52-54 года а это большой опыт и навык
Workplace health and safety has left the chat 😂
Век живи век учись.
Muy bien hecho
Ide brilian para tukang
Наглядный пример, как потратить кучу времени на изготовление "инструмента", который служить будет гораздо меньше времени, чем его создавали😂😂😂
Его видать в детстве проволочки обижали.
К Доктору его!
Ты это..за всех то не говори!
Exellent
Que tipo de óleo você usa para furar metal
أنت عبقري رائع
В любой непонятной ситуации приваривай подшипник и делай режущие кромки из стали пластилин 3
Goodddd
что мешает резать проволоку и квадрат с помощью УШМ ? Сварка подшипника вообще без комментариев. Для того чтоб стягивать стропу есть уже давно заводское решение, гораздо более практичное.
А нет у тебя ушм умник и лепездричества... 🙄🥴
@@evgen154rus2 значит и сварки не будет без электричества чтоб херней не занимался это раз. во вторых чтоб эту херню сделать он пользовался УШМ, значит есть, это два. Умник.
@@user-ln1ee3cn5q
Я тебе в принципе говорю!
Проволока есть я резать не чем, вот для этого и делается подобная штуковина, если ты реально в "поле" ❗🥴Умник.
@@evgen154rus2 если я реально в поле то я воспользуюсь генератором, если его нет то я и не полезу в поле чтоб чтото делать, на худой конец существует такой инструмент как ручной болторез, который легко справляется с катанкой 8 мм, возможно даже пруток десятку осилит, но я не пробовал.
@@evgen154rus2 и много проволоки можно нарезать, когда у тебя режущие кромки из ст3?? они как бы не мягче этой проволоки, вас это совсем не смущает?
the one with the drill nice
Mantap👍
👍👍
Without tempering it will cut about 10 pieces and be destroyed
あなたのアイデアは素晴らしいです。参照してもよろしいですか?
mantap bang
Доктора в студию😅
Muito bom.
I simply love your video style, truly refreshing and creative.
Why do TH-cam welders use this weird, multiple tack weld method instead of using a smaller rod, lower amps to put down a beautiful continuous bead. It irritates me to death. Learn to weld!
Great
Genius
👏👏👏👍👍
имея сверлильный станок,плазморез делает палку-копалку....
Thanks 💐
The concepts are all awesome but so many problems with assembly. I was sad watching a bearing get welded.. especially since it was a sealed bearing!. For that application an oil bronze bushing would work fine.. even just a regular bronze or brass bushing. Never weld on a sealed bearing. One you burn out all the grease inside (notice the small time it was on fire) and also, the weld is not going to hold. Bearing races are high carbon hardened steel. They do not weld very well.
Может и ничего но все эти приспособы очень специфические узкого направления. Много кто делает и катанки скажем арматуру?
👍♥️🙏🙏🙏🙏🙏
👍👍👍👍
I like
Поделки из разряда,пусть будет потом сдам в чер.мет.
👍👍👍👍👍👍👍👍👍👍👍👍
smart-ass video where not everything is shown making the device 👇👇👇
Like
Werygood
Goods
Good
You have to buy a bunch of power tools, lathe, welding machine and a whole array of hand tools to make some manual tools from not so scrap metal and parts. 😂
M
Not true
Nah all you need is an angle grinder, a welder, and some creativity
@@mpirokajosephmgcokoca2355 6:23 6:23 ada 😮😅😮7
Usually people already had most of these regular store-bought hand tools to do some of this work only those who don't are really making it difficult and expensive if they already have them it's easy cheap
Merci pour tout
Okay ❤❤❤😮😮😮
Tambhn utk ukuran itu yesss
Overall, this is a highly informative and enjoyable video for anyone interested in engineering. It showcases your talent and expertise while providing valuable insights and inspiration to fellow enthusiasts. Keep up the great work, and I look forward to watching more of your content in the future 👍👍👍
молодец
После того, как этот молодец приварил железяку к поджипнику я точно понял, что он гений