RV DIY can you repair ABS plumbing?
ฝัง
- เผยแพร่เมื่อ 21 ต.ค. 2024
- If you have a crack in the ABS under your RV you can replace it but you might want to do this first. It’s quick and easy. Even better, it’s not a patch, it’s a repair. If you mix acetone and ABS to make a slurry the acetone will melt the ABS. When applied to a piece of ABS it will met the slurry into the existing piece of ABS and once the acetone evaporates it will be a solid piece. The ratio you use will determine how thick or thin the slurry is. If you need to repair ABS I think this ABS slurry is the way to go.
If you have any questions just drop them in the comments. If you want to see me actually make some of the slurry let me know and I’ll try and get another video together.
Affiliate links below:
My favorite RV T-shirt:
amzn.to/3B8ciPE
DJI wireless mic:
amzn.to/3QSz7vn
Panasonic 4K Ultra HD:
amzn.to/3dlmmM5
Other stuff I have used and liked.
#onlymyopiniontech #daviddoesstuff #rcmodsquad
They have three lens options for the Mokose C100 USB and HDMI camera. Here is a link if you want a closer look. amzn.to/3RKvrO5
Wealpe jaw spring mount:👉 amzn.to/3DXLro9
Mac Mini M1: 👉 amzn.to/3DQ4DEj
Hagibis USB-C hub with dual HDD Drive: 👉 amzn.to/2YX4tfi
63” computer desk: 👉 amzn.to/3BM4mBG
M-Audio XLR interface: 👉 amzn.to/3vl8shM
Fethead mic preamp/activator:
👉 amzn.to/3ANBd7Q
Logitech K380 Bluetooth keyboard:
👉 amzn.to/3FLRNst
My audio and video gear
Insta360 one X2👉 www.insta360.c...
If you want to check the insta360 camera out click here:
👉 www.insta360.c...
👉 GoPro Hero 9 black: amzn.to/3sdYHjg
👉GoPro Hero 8 black: amzn.to/3iPuoKF
👉Tascam DR-07x recorder bundle: amzn.to/2CvB7JM
👉Tascam DR-07x recorder: amzn.to/3hf0YVm
New👉Comica BoomX-U2: amzn.to/2H9Fqga
👉Comica BoomX-D2: amzn.to/3kYkDLV
👉AGD Lavalier mic: amzn.to/2PXuOBX
👉Cell phone tripod adapter: amzn.to/3kTz0B0
👉Articulating friction arm: amzn.to/2E6XFB7
Hey Dave you the man that stuff saved me a ton of work. I thought I was going to have to change my black tank out on my 86 Travelcraft RV because the whole waste outlet pipe had broken completely off I made up that stuff using your information on making it and I used it it. And it worked real real good. May God bless you Dave you and your family very very much.
Thanks for the feedback Timothy, I really appreciate it. I'm happy this helped. Thanks for stopping by. Have a great day and be safe out there.
This is probably the most useful, informative, and realistic video I've seen regarding RV repairs. Thanks for putting it together and sharing.
Thank you for the feedback and for checking it out. Have a great day and be safe out there!
YES! Please make the video showing how to melt the ABS Plastic!
Hello Anna, I'll do that when I get a break from the cold. It's best to do this outside.
Thanks for stopping by. Have a great day and be safe out there.
Did you ever make that video of melting ABS?
@thebreakroom5661 I did. What is liquid ABS?? 😳 @daviddoesstuff
th-cam.com/users/shorts9hxNXow7mjM
This is a great tip! I will share this with John because he's the handyman on our team. Thanks for sharing!
Thanks and thanks for checking it out.
You are a true handy man
Handy to know! 😃
Thanks for stopping by. Have a great day and be safe out there.
Cool fix and I would like to see how it is made
Ok, I’ll do it. We leave on vacation next week but I’ll try and get this out before we go.
Thanks for stopping by. Have a great day and be safe out there.
@@DaviddoesStuff 🙂👍
That patch is only a tiny fraction of the thickness of the pipe, so there's a good chance that it will crack again. After sanding, I would clean with acetone to remove the dirt and then apply several layers.
Thanks for the input. Since there isn't any pressure on that fitting it hasn't been a problem so far. We have about 12k miles of bouncing
since the repair.
On tight cracks the acetone has a tendency to melt the two sides of the original crack back together.
It doesn't look like there's a lot on the pipe in the video but the amount of ABS I put on the pipe is pretty close to the thickness of the pipe.
It certainly wouldn't hurt anything to sand it and add another coat and on a line that had pressure in it, it would be a good idea.
Hopefully someone will see your comment and it might help them. Have a great day and be safe out there!
I would like to see a video on melting abs and would a putty knife or nylon bristle brush to apply the abs?
I’ll do the video. I’ll try and get it out before we leave on vacation next week.
You can apply it with anything that it doesn’t melt.
You can make it with a thickness anywhere from milk to Elmer’s glue to peanut butter. It just depends on the mixture ratio and what you are trying to do.
Very handy to know
Thanks! It makes this repair really easy. Have a great day and be safe out there!
Will ABS Cement do the same thing?
I don't think it will work exactly the same way. This dissolves the ABS then evaporates leaving the ABS solid again which not only fills in the cracks but builds up the area around it.
It seems like the ABS cement softens the ABS but I don't think it would get thin enough to spread it around.
How do you make the abs/acetone paste?
@@fayetravis-ki3yt here is a link that explains it. You can use anything made of ABS to make the paste.
th-cam.com/users/shorts9hxNXow7mjM
Sorry Dave - where do I find the recipe for abs concoction?
It's just ABS plastic and acetone. There isn't any certain ratio. I try to make it thin enough to spread but thick enough it doesn't run too easily.
You can get something as simple as a short piece of ABS pipe or an ABS pipe fitting. If you break it up it dissolves faster and the smaller the pieces the better.
Put the pieces in a container (any glass jar that seals) and add a little acetone to it. Seal it up from a few hours to overnight and check it. Mix it with a wooden dowel or old screwdriver. If it's too thick for your use add more acetone and if it's too thin add more ABS or leave the lid off for a little while. It evaporates quickly.
Alway do this in a well ventilated area. When you get the mixture to the consistency you like just spread it over the crack. As soon as the acetone is evaporated it's ready to use. The ABS you melted will be as strong as it originally was. You can always add several coats if you think it's too thin, just let each layer evaporate for a while between coats.
Here's a quick video that might help.
th-cam.com/users/shorts9hxNXow7mjM?si=Az-K8u_i7J69mHzj
yes.. can you send me the video. I also have a crack on my AB elbow in my RV. Thanks!
th-cam.com/users/shorts9hxNXow7mjM?si=jHVDUVG6T8ES9Lez
Any ABS you have will melt in the acetone. If you don't have any extra ABS you can just pick up a small piece of ABS pipe or even a small connector.
फुल फुल को पसन्द करता है गोरे को हम नहीं हम तो आपको पसन्द करते हैं किसी और को नहीं 🌹🌹🌹🌹🌹🌹🌹 बहुत ही सुंदर वीडियो जी
I'm not sure but why not just use abs glue.
ABS glue works well to secure two pieces that have overlapping surfaces but this bridges the gap in the crack and makes that area thicker. If you don't want to make this yourself, it is available but it's fairly expensive for a small amount.
If the crack isn't opened up and the pipe has low pressure the glue might work but this fixes it in one try.
Thanks for stopping by. Have a great day and be safe out there.
Would like to know how to melt it
Thanks for checking it out Keith. I'll try to do that when I get home Sunday. It takes a day or two to melt so it may be a few days before the video is ready.
Have a great day and be safe out there!
Don’t mistake that for pickle juice lol
They smell a lot different! 😂
Have a great day and be safe out there!
How is that patch holding up?
Solid as a rock. The liquid ABS has enough acetone in it that it melts slightly into the part being repaired.
I don't expect to ever have a problem with that spot again.
Thank for checking it out and the comment. Have a great day and be safe out there!
Thank you for the video! I am repaier freeze damage now. Fingers crossed.
@@dianajdanj just be sure it's clean. I hit it with a little sandpaper. I don't know if it helps but it definitely doesn't hurt. I'm sure you can do it.
Can I buy ABS at Home Depot.
Home Depot had ABS pipe and fittings in a big variety of sizes and shapes. If you plan to melt it with acetone it will melt faster if you break it into small pieces first.
hey david! you got some good content. but as i saw your latest videos ended up with less views. in that case our service might be helpful for you. just let me know if you interested
Thanks for the thoughts and the offer. I’ll just have to let the people decide if they like it enough to share. Have a great day and be safe out there!