hey ted. all dip switches in one position makes it run very nicely. I switched all of mine tonight and wow flawlessly. thanks for getting back to me. it will come to Calgary with me this weekend and play lol
I just got the FR. I plan on upgrading mine to the Sabertooth setup. I really want to get mine out as stock first. After that I will order new motors, and ESCs. Yes, the on off switch is just one more thing to FAIL. I may go with another RC controller I have. I see you are using stock motors? How would that work on a brushless set up ? Can you get the brushless ESC ? If not, I wont worry about it. I can watch someones video on a brushless setup. I really want the brushless for some reason.
Hey Ted, great video! If I remember right, when I did the 380 conversion.... I think I needed new pinions. Something tells me the stock pinions didn't fit the shafts on the 380's right.
CrawlerTedsGarage oh no, it wasn't criticism on your video.... I just wanted to make sure you knew, as it can be pretty disappointing when you think you're about to be finished with an upgrade!
Sweet Ted, that looks much easier to use, you would think kyosho would get the memo & factory install something like that With all the video's on u tube. Nice Ted
I want one so bad.......................... but being poor has it's drawbacks LOL Someday the wife said so I still have hope to cling onto and your videos Thanks for sharing
HEy PAul ! Thanks for watching dude ! Oh ya one day you will get one and love it ! I gotta get my tow rope mounted for tonights Urban Assault in case I have to tow a Ford or two ! lol
Sweet man!!! I have SR too, getting sabertooth upgrade someday too :) But first gotta get Dromida Torque 370 motors inside and 2S batt cos 3S was too much for stock motor, it went smokes... :P
Awesome as usual Ted. I have one of these to and it is fun when it runs lol. I up grade to the sabretooth esc and 380 brushed motors. I am wondering, if you do another video on your rig and upgrade with the pistol grip controller, could you mention the dip switch position on the sabretooth. My rig runs good for a while and then gets twitchy when I run straight and turn. Wondering if you or any one else can suggest a solution for me. Love ur vids man.
Thanks for Checking it out Morety ! I will have a look for sure , good call with the dipswitches . Im not sure where mine are set . I tried to run it on the weekend and it wouldnt work properly , like no power . Not sure whats up .
When you change the leads on athe esc and battery which end of the deans do you put on each(sticky out bit or the plug in bit) ps another great vid ted
Joseph Hand you want the innie(female) on the battery, and the outie(male) on the esc. if you put the outie on the battery, you're begging for short circuit and a big fire.
i have alot of issues with my tracks getting packed with snow and slipping off of the front sprockets. i have tightened it and it will not spin because it is too tight. i have loosened it and it doesnt help either. if you could help me ted that would be great. if you have a link to a video that would be helpful also. thank you
Sometime the wet sticky snow just causes problems . I like it when its cold out and the snow is fluffy . I leave my blizzard outside in the cold for a while before I run it , the tracks cool off and snow doesnt stick as bad ,
NICE! I just made my blizzard brushless this summer. You may want to hit that ESC with a coat of corrosionX spray to protect it if it does get wet in there. Check out my channel loads of blizzard mods and vids!
![[TH] 2024 PMGC League | Survival Stage วันที่ 1 | PUBG MOBILE Global Championship](http://i.ytimg.com/vi/FVFT-PFwU80/mqdefault.jpg)
hey ted. all dip switches in one position makes it run very nicely. I switched all of mine tonight and wow flawlessly. thanks for getting back to me. it will come to Calgary with me this weekend and play lol
Dude, I just used a pair of side cutters to make my notches! Lol
Freaking love my blizzards.
What ?? NO blow torch or Screaming Plastic ?
cool. every time i see one of those things running around it reminds me of those little jumping spiders with the small bodies and big heads.
hahaha
12:46 Ted's Broken!! lol... looked like fun bro!
Lol, Actually that was a pic of some one elses rig .
Teds broken ?? Not ! hahaha
Thanks for watching bro !
I just got the FR. I plan on upgrading mine to the Sabertooth setup. I really want to get mine out as stock first. After that I will order new motors, and ESCs. Yes, the on off switch is just one more thing to FAIL. I may go with another RC controller I have. I see you are using stock motors? How would that work on a brushless set up ? Can you get the brushless ESC ? If not, I wont worry about it. I can watch someones video on a brushless setup. I really want the brushless for some reason.
looks good with the new esc..!
Hey Ted, great video! If I remember right, when I did the 380 conversion.... I think I needed new pinions. Something tells me the stock pinions didn't fit the shafts on the 380's right.
Right you are rcOhio ! I should have mentioned that .
CrawlerTedsGarage oh no, it wasn't criticism on your video.... I just wanted to make sure you knew, as it can be pretty disappointing when you think you're about to be finished with an upgrade!
Sweet Ted, that looks much easier to use, you would think kyosho would get the memo & factory install something like that With all the video's on u tube. Nice Ted
I know right ? Maybe eventually they will ?
I want one so bad..........................
but being poor has it's drawbacks LOL
Someday the wife said so I still have hope to cling onto and your videos
Thanks for sharing
sell some of your wife's shit on ebay... helps my rc addiction :)
HEy PAul ! Thanks for watching dude !
Oh ya one day you will get one and love it !
I gotta get my tow rope mounted for tonights Urban Assault in case I have to tow a Ford or two ! lol
careful all my rigs are fords LOL can't wait to see the videos been following since the first one
have fun Bro
Sweet man!!! I have SR too, getting sabertooth upgrade someday too :) But first gotta get Dromida Torque 370 motors inside and 2S batt cos 3S was too much for stock motor, it went smokes... :P
hey you gotta do more vids like this!!!
Awesome Ted :)
HEy Bushman ! Thanks Bro !
Awesome as usual Ted. I have one of these to and it is fun when it runs lol. I up grade to the sabretooth esc and 380 brushed motors. I am wondering, if you do another video on your rig and upgrade with the pistol grip controller, could you mention the dip switch position on the sabretooth. My rig runs good for a while and then gets twitchy when I run straight and turn. Wondering if you or any one else can suggest a solution for me. Love ur vids man.
Thanks for Checking it out Morety !
I will have a look for sure , good call with the dipswitches . Im not sure where mine are set . I tried to run it on the weekend and it wouldnt work properly , like no power . Not sure whats up .
Nice editing
Thanks William , I noticed that I was in the way of the camera sometimes in this vid . had to cut some out .
Sweet. thanks
Swwweeeet !! I love it. I want one to. :-)
Hey Andrew ! They are a blast !
When you change the leads on athe esc and battery which end of the deans do you put on each(sticky out bit or the plug in bit) ps another great vid ted
Joseph Hand you want the innie(female) on the battery, and the outie(male) on the esc. if you put the outie on the battery, you're begging for short circuit and a big fire.
Thanks Joseph ! Looks like Humble had the info for ya !
Thanks Buddy !
Would I be able to use my stock twin stick remote with the sabertooth???
very awesome dude :D
Thanks Man !
No problem:D
Where can I get that sabretooth esc
i have alot of issues with my tracks getting packed with snow and slipping off of the front sprockets. i have tightened it and it will not spin because it is too tight. i have loosened it and it doesnt help either. if you could help me ted that would be great. if you have a link to a video that would be helpful also. thank you
Sometime the wet sticky snow just causes problems . I like it when its cold out and the snow is fluffy . I leave my blizzard outside in the cold for a while before I run it , the tracks cool off and snow doesnt stick as bad ,
Great videos never disappointed in the videos keep up with the good work :) ☺ ☺ 😃 😃 😁 😁
Thanks Caleb ! Appreciate that man !
NICE! I just made my blizzard brushless this summer.
You may want to hit that ESC with a coat of corrosionX spray to protect it if it does get wet in there.
Check out my channel loads of blizzard mods and vids!
It couldnt hurt thats for sure hey .
I will check yur channel out !
THANKS!
😮😮😮😮😮
I did the same mod too
Works great hey ?
'
hi ted...
i like kyosho blizzard DX is better model...
i have one M1 model tank with 2 ESCs