Ford Focus 2008 - 12 Replacing LCD for Pixel Repair, and full speedometer strip down Please remember, no need to remove the needles, if you're just changing the LCD screen. Thanks for watching www.akspeedo.com/
Thanks for this video - my LCD display has that weird border issue thing and i didnt realise it would be possible to fix it myself until i was this video
Thank you very much for the video, all the content you publish is always very well prepared. For those who ask, PUP is 13 GND and 32 12v. Can you give some recommendation for bench testing, like in your video ? See values etc
sir, mine is 2009 model and the dash panel goes totally off,what seems to be the problem? do i have to do the same change the LCD as well or is it the cluster fuse? please i really need your and appreciate your help! tia
@akspeedo how did you get access to this module? I have a 61plate focus with failing LCD screen (it works fine 98% of the time but intermittently goes completely red)
Hi Pete , I have a ford focus 2008 , my LCD screen goes completely red too often , should I order all the dashboard or only the LCD Screen .. contact me pls if u have resolved the same problem as me
Mine has a loose or dry joint and is causing the usual problems. if i opt for a breakers yard replacement board, do i need new keys as well, or can I reprogramme my old keys to the new board? I need a quick fix as I have no transport without it.
Just refit as they're removed, motor stops and needles are at zero, remember, if you're just clanging the LCD screen, then there's no need to remove the needles.
@@iantwj Trust me, real pain it the ass to put them back to correct position. Connect cluster without any plastic and use "secret menu" and gauge test option from several times... I have no idea how these folks put them just like that and they are fine. I tried their way and needles were f*cke up each time.
![HIWWHEE | OHM [Official MV]](http://i.ytimg.com/vi/OJJLtTLqLag/mqdefault.jpg)
Thanks for this video - my LCD display has that weird border issue thing and i didnt realise it would be possible to fix it myself until i was this video
Just replaced pixel panel on my Kuga, great video thanks
Thank you very much for the video, all the content you publish is always very well prepared.
For those who ask, PUP is 13 GND and 32 12v.
Can you give some recommendation for bench testing, like in your video ? See values etc
Thanks for this video, saved me a fair bit of time 👍
sir, mine is 2009 model and the dash panel goes totally off,what seems to be the problem? do i have to do the same change the LCD as well or is it the cluster fuse? please i really need your and appreciate your help! tia
Thank you, helpfull video 👍
Cool video. Thanks 😊
The LCD backlight LEDs are white or orange?
I'm thinking in to change the LCD color.
What is the part called in the video where you said “that was a real pig to get off”?
Grato meu amigo
@akspeedo how did you get access to this module? I have a 61plate focus with failing LCD screen (it works fine 98% of the time but intermittently goes completely red)
Yeah, good chance it's the screen, cheers James
Hi Pete , I have a ford focus 2008 , my LCD screen goes completely red too often , should I order all the dashboard or only the LCD Screen .. contact me pls if u have resolved the same problem as me
Mine has a loose or dry joint and is causing the usual problems. if i opt for a breakers yard replacement board, do i need new keys as well, or can I reprogramme my old keys to the new board? I need a quick fix as I have no transport without it.
Speedometer is key coded, best just to re-flow the solder, as in our other Focus video, link below:
th-cam.com/video/urbHeGQt3xg/w-d-xo.html
I have one of those guage clusters and i wanna turn it on like that and how do you do it
Love the videos on dismantle procedure but a quick question do the needles need calibrating on installation thanku
Just refit as they're removed, motor stops and needles are at zero, remember, if you're just clanging the LCD screen, then there's no need to remove the needles.
Hi the needles are not accurate after I dismantled it. How do I make it accurate again?
@@iantwj Trust me, real pain it the ass to put them back to correct position. Connect cluster without any plastic and use "secret menu" and gauge test option from several times... I have no idea how these folks put them just like that and they are fine. I tried their way and needles were f*cke up each time.
@@iantwj Checkout our other Ford video for needle refit, link below:
th-cam.com/video/urbHeGQt3xg/w-d-xo.html
Which device do you use to power on this cluster?
Hello. Do you know where can I buy a LCD in Europe?
No Ford sign on your website mate 👍🏻
Hi does your company fit the vdo LCD sreens on your website its not showing a ford logo
Regards
Hi, please email us: akspeedo@hotmail.co.uk
Where to Buy the display??
Boa dica
anyone knows what size are the leds?
Can I buy the screen from you?? Can't see anything on your website. Great video thanks
Hi, yeah, drop us an email: akspeedo@hotmail.co.uk
Anyone knows the size of leds?
Tiny LEDs on the Fords, James
Can you share the pin out??
Check my question. Best.
Which device do you use to power on dashboard?