❤️❤️❤️ brilliant, exactly what I needed to find. 💎💎💎 First, I learnt where the socket box is located Second, how to use it and fix the problems by the use of the software. ❤️❤️❤️🙏🙏🙏❤️❤️❤️ Can I use this code reader for my Mercedes Benz 124T 300E from 1989 benzin it is not a disel? Any answer is helpful. Stay safe and blessings from Germany
do you know anything about reprogramming the ecm I had wrecked my 94 500 sl we had bought a parts car a92 sl500 so my husband decided to make parts car my driver unfortunately the ignition and the trunk ignition was damaged beyond use so he swapped ignition from 94 to 92 the car turs over but wont start ughhhh
@@fritzjrundhaug81 www.mercedescodereader.com for purchase. However I only ship in the USA now. Our USPS raised their rates and overseas shipping with delivery confirmation and tracking is over $25. Rick
@@ricksmercedesobd1diagnosti332 thank you...actually my problem is the ABS light still on after the engine start....is there any part of this methode can solve the problem?
@@stephenkoko639 try to change the module @ the torpedowall backside of battery, forgot the name of it, red top...had the same issue and it solved the problem.
Hi nice video, I made my own blinkreader and literally nothing happens w the led on any occassion even though it was tested to light up w a 9v battery just before, any suggestions? w124 200E 1995*
Go to my website and download the PDF code file. It has the connections in a picture. The 8 port doesn't have a positive so you need to use the battery. #1 hole is ground or you can use any ground. Thanks, Rick .www.mercedescodereader.com/files.html
@@RicardoMartinez-kr5qk - You mean hot as in positive voltage or the code reader light turns on immediately? Have never seen voltage on the 8 socket. If the code reader light turns on by itself there is a stuck solenoid or relay on that system allowing phantom voltage to pass. Repair the faulty part finding it can take some time since the code reader can't tell where to start.
Sorry for the confusion Rick, i thought i was getting battery voltage at port 3 but im not. What is happening is that the light on the code reader comes on as soon as i touch the red to battery.
@@george-louis6998 - No flash or one flash indicates there in no code stored by the DCM. Which is a good thing. I'm assuming you are putting Red to positive and black to a ground and the yellow into the other ports. Rick
@@RickDean thank you for your reply, I'm putting positive on battery positive, negative on number 1 of the 16 pin connector. And the test wire on number 6 or 3 to test. I got a very faint light after the 2 seconds. Or no light.
❤️❤️❤️ brilliant, exactly what I needed to find. 💎💎💎
First, I learnt where the socket box is located Second, how to use it and fix the problems by the use of the software.
❤️❤️❤️🙏🙏🙏❤️❤️❤️
Can I use this code reader for my Mercedes Benz 124T 300E from 1989 benzin it is not a disel? Any answer is helpful. Stay safe and blessings from Germany
do you know anything about reprogramming the ecm I had wrecked my 94 500 sl we had bought a parts car a92 sl500 so my husband decided to make parts car my driver unfortunately the ignition and the trunk ignition was damaged beyond use so he swapped ignition from 94 to 92 the car turs over but wont start ughhhh
I need to get this gadget, where can I buy?
purchase on www.mercedescodereader.com or ebay
can this unit use on the 94 sl500?
Can read from all OBD1 pin variations. Just different port or socket connections
Hi Rick, Where to buy the ODB 1?? E-bay/Amazon have the ODB 2, will that one do? Thanks from Norway
Buy from my website. Shipping is very expensive. www.mercedescodereader.com
@@RickDean Hi Rick, unable to place a order cause when I click on Pay Pal a text telling me that it does not exists. Please help.
@@fritzjrundhaug81 www.mercedescodereader.com for purchase. However I only ship in the USA now. Our USPS raised their rates and overseas shipping with delivery confirmation and tracking is over $25. Rick
Ebay it does not have to be an 0bd1
Just type in w124 code reader
Just bought one but make sure it has 3 pins not plug and states for w124
Hi....i have e220 sedan with engine M111.960...it is supposed to be 124.022....can I use this methode?
Yes. Its all the same. Engine specifics don't matter. Most codes are the same....whether its a 300e or 500e.
@@ricksmercedesobd1diagnosti332 thank you...actually my problem is the ABS light still on after the engine start....is there any part of this methode can solve the problem?
@@stephenkoko639 try to change the module @ the torpedowall backside of battery, forgot the name of it, red top...had the same issue and it solved the problem.
Hi nice video, I made my own blinkreader and literally nothing happens w the led on any occassion even though it was tested to light up w a 9v battery just before, any suggestions? w124 200E 1995*
Donde puedo comprar esta makina soy de chile por favor
en linea o en ebay
I HAVE A 8 PORT WHERE DOES THE CONECTORS GO??
Go to my website and download the PDF code file. It has the connections in a picture. The 8 port doesn't have a positive so you need to use the battery. #1 hole is ground or you can use any ground. Thanks, Rick .www.mercedescodereader.com/files.html
Hi Rick. My 190e has the 8 port plug. My problem is that port 3 (cis) is hot at all times. Should this be?
@@RicardoMartinez-kr5qk - You mean hot as in positive voltage or the code reader light turns on immediately? Have never seen voltage on the 8 socket. If the code reader light turns on by itself there is a stuck solenoid or relay on that system allowing phantom voltage to pass. Repair the faulty part finding it can take some time since the code reader can't tell where to start.
Sorry for the confusion Rick, i thought i was getting battery voltage at port 3 but im not. What is happening is that the light on the code reader comes on as soon as i touch the red to battery.
So there's not a plug under the dash I can hook up my code scanner to??
jimbob - Under the dash connection is OBD2, which came after OBD1 about 1996.
Drone stuff thank you for tip
Mine is under dash 1995.
So I can’t use the OBDII on a 95 e420?
All Mercedes OBD1 socket ports are in the engine bay
I have nothing in Port 16 no power or metal socket
Use battery positive. Same thing.
@@RickDean I have, and when I press the button the light comes on after releasing no flashing happens
@@george-louis6998 - No flash or one flash indicates there in no code stored by the DCM. Which is a good thing. I'm assuming you are putting Red to positive and black to a ground and the yellow into the other ports. Rick
@@RickDean thank you for your reply, I'm putting positive on battery positive, negative on number 1 of the 16 pin connector. And the test wire on number 6 or 3 to test. I got a very faint light after the 2 seconds. Or no light.
@@RickDean I have an srs light on dashboard so it should show something; no?