Thanks for this. I had to take the Handle off to fix the door skin so I drilled out the rivet to get the rear part of the handle mechanism off also . Nice and easy Video, I had forgot how to release the Handle.I seem to remember the Laguna 2 was a similar system to this one I think
It's so difficult to see up into the door. I'm glad you've made this short video explanation. I'll try attach it back to the handle. My internal handle also has an issue of opening. Not sure if I should just get another drivers door instead? Thanks
Thank you for taking the time to comment. If theirs been an issue with the interior pull handle to would just get a second hand unit from any good recyclers
I got one from breakers. Managed to install it and the inside handle works perfect. Unfortunately the outside handle is still not working.. Not sure why that is my friend? Any help advise is greatly appreciated. 🙏
Good video; my problem is that the screw mechanism which rotates the silver bit has the teeth worn away, so it won't rotate and thus I cannot remove the assembly. There's also a rivet at the other end of the handle which needs removing. Why can't they make this easier!
Hey good sir so my question is how does the part that holds the lock and handle come out? I have removed the lock and outer handle but struggling to get the main black plastic bit out that holds these components
Managed to replace and inside works but the outside handle is not working.. The handle has alittle pull when you try to open the drivers door but still no joy. Any help guys will be greatly appreciated. Thank you 🙏
@@cordellsmith4028 Hi, how do you remove the whole handle assembly out of the door? Does it come out easy? My problem is when you lift the flap and slide it forwards to release the handle it has become detached and is now loose. But i cannot from where whiile its attached to the door. Any info is appreciated
@@andrewclarke9467 Hiya buddy. Sorry its not going to plan. It is harder than it looks hence why I did the video. I simply removed the three screws holding the door catch undid the inner door opening handle. I removed the outer door handle. Then removed it all out together as one unit. I think it's made that way to help change any of the two cables, if there was a problem. Good luck. 😊
Very helpful. Still not sure about rear handles on the 5 door. There is no grommet in the door edge on the rear doors to enable removal of the end cap. Does this come off with the "pull part" of the handle instead of being separate like the front ?
Hiya Pete. I've not done a five door version yet. If it hasn't a grommet to access the handle cover it's normally rear inner door card removal. Undo the two/three bolts holding on the latch. With the latch mechanism out of the way you will see a bolt which holds on the handle cover. Is there no other videos on TH-cam about the handle removal on your five door. Good luck. 😊
Hiya. If you mean the inner mechanism. I removed my mechanism all in one piece, which means the inner handle support, the pull lever and cable and the door latch, it all comes out as one. Far easier to disconnect cables off the car. Hope this helps. If you need more info let me know. Cheers.
@@cordellsmith4028 Hi thanks for the response. Not your fault really as i should have known to check before hand! To be honest i managed to wangle it enough as the one i was using the tool on, had come loose so was just tightening. :)
Excellent, I wasted so much time looking and scratching my head and now I can see how easy it is. Thank you!!
Thank you... Thank you... Thank you... can't explain in words how much this has helped me.. 5 stars :)
Hiya.
Yes, the inner door card has to be removed to move the white plastic slide mechanism.
Good luck.
Thanks for this. I had to take the Handle off to fix the door skin so I drilled out the rivet to get the rear part of the handle mechanism off also . Nice and easy Video, I had forgot how to release the Handle.I seem to remember the Laguna 2 was a similar system to this one I think
Brilliant video.
Do you have to remove the door card or can you access the white clip to remove the bigger part of the handle?
It's so difficult to see up into the door. I'm glad you've made this short video explanation. I'll try attach it back to the handle. My internal handle also has an issue of opening. Not sure if I should just get another drivers door instead? Thanks
Thank you for taking the time to comment. If theirs been an issue with the interior pull handle to would just get a second hand unit from any good recyclers
I got one from breakers. Managed to install it and the inside handle works perfect. Unfortunately the outside handle is still not working.. Not sure why that is my friend? Any help advise is greatly appreciated. 🙏
Thanks a Million, you're a life saver.
Good video; my problem is that the screw mechanism which rotates the silver bit has the teeth worn away, so it won't rotate and thus I cannot remove the assembly. There's also a rivet at the other end of the handle which needs removing. Why can't they make this easier!
Your so right.
Thank you for taking the time to comment mate
Hey good sir so my question is how does the part that holds the lock and handle come out? I have removed the lock and outer handle but struggling to get the main black plastic bit out that holds these components
Managed to replace and inside works but the outside handle is not working.. The handle has alittle pull when you try to open the drivers door but still no joy. Any help guys will be greatly appreciated. Thank you 🙏
Great little video... Helped me loads 👍
Thank you Andrew for taking the time to comment. 😊
@@cordellsmith4028 Hi, how do you remove the whole handle assembly out of the door? Does it come out easy? My problem is when you lift the flap and slide it forwards to release the handle it has become detached and is now loose. But i cannot from where whiile its attached to the door. Any info is appreciated
@@andrewclarke9467 Hiya buddy. Sorry its not going to plan. It is harder than it looks hence why I did the video. I simply removed the three screws holding the door catch undid the inner door opening handle.
I removed the outer door handle. Then removed it all out together as one unit. I think it's made that way to help change any of the two cables, if there was a problem. Good luck. 😊
@@cordellsmith4028 thanks for the reply, i shall have a go tomorrow. Cheers 👍
Very helpful. Still not sure about rear handles on the 5 door. There is no grommet in the door edge on the rear doors to enable removal of the end cap. Does this come off with the "pull part" of the handle instead of being separate like the front ?
Hiya Pete.
I've not done a five door version yet. If it hasn't a grommet to access the handle cover it's normally rear inner door card removal. Undo the two/three bolts holding on the latch. With the latch mechanism out of the way you will see a bolt which holds on the handle cover. Is there no other videos on TH-cam about the handle removal on your five door.
Good luck. 😊
@@cordellsmith4028
HI. Thanks for that. I'll give it a go. No luck anywhere on TH-cam regarding the 5 door version. 🤔
Great video. How do you get the whole mechanism, shown in the video, off the door?
Hiya.
If you mean the inner mechanism. I removed my mechanism all in one piece, which means the inner handle support, the pull lever and cable and the door latch, it all comes out as one. Far easier to disconnect cables off the car.
Hope this helps. If you need more info let me know.
Cheers.
Fucking French cars,always problems,thanks for your help.
I feel your pain buddy.!!
I have just bought a T20 to use on a 2008 Clio door handle and the screw lock size is bigger.
Hiya Paul sorry if I've given the wrong torx size. What size was it?
Did you manage to complete your project yet.
@@cordellsmith4028 Hi thanks for the response. Not your fault really as i should have known to check before hand!
To be honest i managed to wangle it enough as the one i was using the tool on, had come loose so was just tightening. :)
I'm looking to buy a pair of these mechanisms but no idea where to get them
Hiya Sean.
Why do you need a pair of handles? I'm not sure if the five door clio is the same as three door.
Cheers.
@@cordellsmith4028 yeah mine is three door just looking for the exterior holder price because mine do not recoil
@@seanireland8963 I bet there's someone on ebay breaking a clio to get a pair.
@@cordellsmith4028 I wish :/ might have to go to a scrap yard