I concur on the comments about being difficult to install in a car. I am a little person and have to maneuver not just my shorter arms, but my body under the dashboard. And I still can’t get them installed. I have contacted auto service centers and they all decline to install them for liability reasons. I’m reaching out to friends now.
the brake pedal looks very solid with those 2 row bolting holes, but that gas pedal makes me worried. y not make 2 row bolting system just like the brake pedal extender
Much harder to put on in real life when you are trying to screw it on in tight spaces... But its a great product. Wish there was an easier way to install
Like Davie Frank indicated, I too agree. I ended up removing the driver's seat in order to more easily work on the pedal extenders. I nearly got to the point of drilling holes in the gas pedal and putting a bolt through the two black anodized aluminum blocks directly through the pedal!!! Luckily on my third hour (and third attempt at installing these things), I found the right combination of brackets and bolts. The brake pedal extender went together much better.
But what if I want to lower the gas and brake pedal. I have a conversion minivan that has a ramp and it used to have the front seats with platforms already attached once you take them out and use your mobility chair with the lock system the pedals are up on the wall basically of the van they're too high up so I need some that'll bring them down to the ground further
The instructions that come with it are trash. The video is helpful but has nothing about how to adjust to different lengths. Which would be helpful since we tried to just adjust down and the holes wouldn’t line up just one size lower than it was shipped. The ones we bought were put together wrong so look carefully at how yours are out together.
I find these instructions lacking and the statement that "it's not rocket science", an insult. Everyone doesn't have the same level of knowledge regarding installations.
That's his communication style. I see it as him giving encouragement. By calling it easy, he feels he is empowering people to think of it as easy so they grow in confidence. That's what I got from it. Although you are welcome to your own perceptions. 💗
i did all steps shown in the video, the break becomes vers soft, while the gas padel become harder than before , my car is mazda 6 , how to make gas padel softer like the break’s?????
Good video, but the second gas pedal, I dont think there is a way to configure it, to avoid the bottom of the dash if you need it longer. Hinge type gas pedal is irritating.
You would have to buy 2 sets then use the GAS pedal version on your clutch. I called and they offered me a discount because I also needed the clutch pedal.
nice vid since enclosed instructions are about worthless. Looks like this accelerator is floor mount hinge type, which these do NOT seem to give same feel. I ve looked for an extender to properly mimick the movment of the accelerator in a 2104 beetle, and already had a set of these in 2002 beetle with pedal mounted on lever with fulcrum above the pedal, but using this on a floor mount doesnt give proper feel. Too bad this company has but TWO videos on their product, and do not answer questions in the comments.
I concur on the comments about being difficult to install in a car. I am a little person and have to maneuver not just my shorter arms, but my body under the dashboard. And I still can’t get them installed. I have contacted auto service centers and they all decline to install them for liability reasons. I’m reaching out to friends now.
the brake pedal looks very solid with those 2 row bolting holes, but that gas pedal makes me worried. y not make 2 row bolting system just like the brake pedal extender
Does fit over a "floor mounted" gas pedal ? 2017 Tucson ?
Will these pedal fit the clutch pedal
Will these also fit the clutch pedal and where can you buy them. tia clive
What about the clutch????????
this is a great video it helps me much,
Much harder to put on in real life when you are trying to screw it on in tight spaces... But its a great product. Wish there was an easier way to install
I fully agree, need a flexible person to do this. Hard enough just taking them off when selling a vehicle.
Like Davie Frank indicated, I too agree. I ended up removing the driver's seat in order to more easily work on the pedal extenders. I nearly got to the point of drilling holes in the gas pedal and putting a bolt through the two black anodized aluminum blocks directly through the pedal!!! Luckily on my third hour (and third attempt at installing these things), I found the right combination of brackets and bolts. The brake pedal extender went together much better.
Would this work with clutch paddle ?
Yes, it will. I brought 2 sets and have the gas pedal version on my clutch.
But what if I want to lower the gas and brake pedal. I have a conversion minivan that has a ramp and it used to have the front seats with platforms already attached once you take them out and use your mobility chair with the lock system the pedals are up on the wall basically of the van they're too high up so I need some that'll bring them down to the ground further
The instructions that come with it are trash. The video is helpful but has nothing about how to adjust to different lengths. Which would be helpful since we tried to just adjust down and the holes wouldn’t line up just one size lower than it was shipped. The ones we bought were put together wrong so look carefully at how yours are out together.
are they safe to use?
can this damage the original pedals?
Yeah its easy with all that space you have there, lol... try putting them on a car with hardly any space....
Exactly, I cut myself 2 times already and I’m not even done! Tightening them is nigh impossible
I find these instructions lacking and the statement that "it's not rocket science", an insult. Everyone doesn't have the same level of knowledge regarding installations.
Agreed ‼️
I would imagine actual rocket science is way more complex. So in actuality, no, it’s not rocket science.
That's his communication style. I see it as him giving encouragement. By calling it easy, he feels he is empowering people to think of it as easy so they grow in confidence. That's what I got from it. Although you are welcome to your own perceptions. 💗
i did all steps shown in the video, the break becomes vers soft, while the gas padel become harder than before , my car is mazda 6 , how to make gas padel softer like the break’s?????
Good video, but the second gas pedal, I dont think there is a way to configure it, to avoid the bottom of the dash if you need it longer. Hinge type gas pedal is irritating.
Do these damage pedals?
The first one he put on is the wrong way around, it hooks under not over the pedal
I need to reverse the gas pedal and connect at bottom can this be done
Yes- you can do it that way.
Where's the one for the clutch?
You would have to buy 2 sets then use the GAS pedal version on your clutch. I called and they offered me a discount because I also needed the clutch pedal.
Funny thing is this guy has his gas pedal on the floor. Makes It a lot more of a bitch to install when the pedal is in the car
nice vid since enclosed instructions are about worthless. Looks like this accelerator is floor mount hinge type, which these do NOT seem to give same feel. I ve looked for an extender to properly mimick the movment of the accelerator in a 2104 beetle, and already had a set of these in 2002 beetle with pedal mounted on lever with fulcrum above the pedal, but using this on a floor mount doesnt give proper feel. Too bad this company has but TWO videos on their product, and do not answer questions in the comments.
In need this prodect
I need these to be closer to the floor not 6 times worse than what I have now
Awfully nice when you're not in a corner of the floorboard and 1" to work with.🤣
How to bay in pakistan.
www.ebay.com/itm/254513415729
I guess you didn’t understand the instructions either.