Cisco WLC basic Configuration

[@ahmetgure1506]

Thanks for description, nobody tells like this video... with this video solved my all connection problems.

[@secure_packet]

if you have any query or facing any challenge you can shoot yo me, i will try to help you.

[@ahmetgure1506]

Thanks for reply, now on AP cli console i am getting this error and AP is not joining to WLC, what should i have to check?
AP Error Message;
Not in Bound state.
Jan 30 01:52:09.971: %CAPWAP-3-DHCP_RENEW: Could not discover WLC. Either IP address is not assigned or assigned IP is wrong. Renewing DHCP IP.
@@secure_packet

[@ahmetgure1506]

​@@secure_packet
Thanks for reply. Can you help about this problem on AP,
"Jan 30 02:09:39.971: %CAPWAP-3-DHCP_RENEW: Could not discover WLC. Either IP address is not assigned or assigned IP is wrong. Renewing DHCP IP."

[@tomdrums4607]

Hello, we cant see the mac address of the wlc on the switch after configurating the WLC as you did, do you know why?

[@secure_packet]

Hi Please share your switch port details, we also need to check that on which switch it's connected.

[@secure_packet]

This video is related to the single VLAN 80, even if the user is connected to the SSID he will get the id from the same VLAN 80 SEGMENT 172.16.80.10.
LET me check the mac address of wlc on the switch and get back to you.

[@pyth6989]

ok i need help, i configure my wcl and my switch but i cant connect wcl by ssh or web

[@secure_packet]

I will share the sw configuration and wlc as well so that you will understand.

[@secure_packet]

Switch Side: L2Sw#sh run int g0/1
interface GigabitEthernet0/1
switchport mode trunk
end
WLC Side: interface configuration:
Interface Name Port Vlan Id IP
-------------------------------- ---- -------- --------------- ------- ------ --
management 1 80 172.16.80.10